25G SFP28 CWDM 20km Transceiver SFP Module 1270nm 1370nm For CISCO HP Huawei

25G SFP28 CWDM 20km Optica Transceiver SFP Module 1270~1370nm compatible with CISCO HP Huawei H3C Juniper ZTE

Optical Transceive Module Description

25G SFP28 transceiver module is designed to transmit and receive optical data over single mode optical fiber for link length 10km/20km. The SFP28 LR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Optical Transceive Module Product Features

• Supports 25GBASE(25Gb/s);
• Lane bit rate 25.78 Gb/s;
• Up to 20km transmission on SMF;
• DFB laser and PIN receiver for 6 CWDM waves(1270nm-1370nm);
• High speed I/O electrical interface (25GAUI);
• I2C interface with integrated Digital Diagnostic monitoring;
• SFP28 MSA package with duplex LC connector;
• Single +3.3V power supply;Maximum power consumption 1.2 W;
• Operating case temperature: Refer to Order info.
• Compliant to IEEE 802.3cc Draft3.0, SFF-8402 and SFF-8432;

Optical Transceive Module Applications

• 25GBase-CWDM

1. Absolute Maximum Ratings

2. Recommended Operating Conditions

3. Optical Characteristics

Notes:

1. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.

2. High Bandwidth Mode. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.

3. 20dB spectral width.

4. Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power.

5. At 5E-5 BER, KR4 FEC

6. Per IEEE802.3cc

4. Electrical Characteristics

5. Pin Descriptions

Notes:

7.1 Circuit ground is internally isolated from chassis ground.

7.2 Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.

7.3 Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.

7.4 LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

6. EEPROM & DDM THRESHOLD

6.1 EEPROM

2 wire address 1010000X (A0h)

6.2 DDM THRESHOLD

Ordering Information

CWDM WAVE=1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm.

Established in 2000, Takfly Communication Co., Ltd. is a National High-tech Enterprise integrating R&D, production and sales. As a leading provider of optical connectivity equipment, Takfly has more than 22 years of design and manufacturing experience, and its business has expanded to more than 128 countries and regions. Takfly focuses on providing optical connection products for global customers, and provides customized optical fiber connection products for domestic and foreign operators, cloud service providers, main equipment manufacturers, system integrators, project engineers, aviation and medical fields, and optical research, ect. Takfly's main products: data center and FTTH passive optical devices, fiber management systems, WDM wavelength division multiplexers, polarization-maintaining and high-power products, fiber-optic active equipment, ect. Takfly has been qualified with ISO9001:2015 quality system certification and ISO14001:2015 environmental management system certification. Based on the management concept of “Quality is first, reputation is the most important, management is the foundation, and service is honest”and adheres to the principle of “survival by quality, development by quality, efficiency by quality”, customer-centric, sincere service to customers, customer satisfaction is the direction of our efforts. At present, our products have passed CE, ROHS, CPR EN50575 and ANATEL certifications to ensure the reliability and stability of each product and provide excellent services to our customers.

Takfly's production ranges from MPO/MTP Patch Cable, WDM/CCWDM/CWDM/DWDM, Fiber Optic PLC Splitter, Fiber Optic Cable, Fiber Optic Patchcord, Fiber Optic Pigtail, Fiber Optic Adapter, Fiber Optic Attenuator, Fiber Optic Patch Panel, Fiber Optic Termination Box, Fiber Optic Splice Closure, Fiber Optic Media Converter, Ethernet Switch, Fiber Optic Tool Kit.

So far, Our products have been widely installed in many big worldwide projects and work perfectly. Many project contractors ask the first and second operators to purchase fiber items from Takfly for their new projects. In addition, we also have built long-term cooperation with Vodafone, Telefonica, Orange, Movistar, and Ericsson.