Handheld 3999 Counts Digital Clamp Meter 30MHz Frequency Capacitance Resistance

Handheld 3999 Counts Digital Clamp Meter 30MHz Frequency Capacitance Resistance

VICTOR 6056E Handheld 3 3/4 3999 Counts 1000V/600A DC/AC Digital Clamp Meter 30MHz Frequency Capacitance Resistance

1. General

The meter is a reliable safe and 3 3/4 DC/ACA digital clamp meter with stable performance. Centered on the double-integrating A/D conversion of large-scale integrated circuit, overload protect circuit with full range and unique exterior design, thus is a dedicated electrotechnical meter with excellent performance.

It use to measure such parameters as DCV, ACV, DCA, ACA, resistance, diode, continuity, frequency etc. Please pay attention to the safety information and the content of warning etc. on the manual, and comply all the warning and notices.

2. Unpacking Check

After unpacking, please carefully check if the following items are missing or damaged. If yes, please contact the distributor immediately.

digital clamp multimeter 1set

User’s manual 1piece

Test leads 1set

Bag 1piece

9V battery 1piece

3. General Features

1-1. Display mode: LCD display;

1-2. Max. display: 3999(3 3/4)bit auto polar display or unit display;

1-3. Measurement mode: double-integrating A/D conversion;

1-4. Conversion rate: 3 times/s;

1-5. Over-range display: “OL” display at highest bit;

1-6. Low battery display;

1-7. Auto power-off function;

1-8. Max. clamp jaw opening size: dia. 55mm;

1-9. Max. size of predicted current lead: dia.47mm;

1-10. Effect of electromagnetic field: If used for devices near electromagnetic field, unstable or incorrect readings may be displayed;

1-11. Error caused by test position: When measuring current, please place the source to be tested in the center of the clamp jaw; otherwise, certain additional error will occur;

1-12. Operating environment: (0~40)℃, RH＜80%;

1-13. Storage environment: -10~50℃, RH＜80%;

1-14. Power supply: 9V battery;

1-15.Volume(dimensions): 255mm×90mm×46mm (L×W×H) ;

1-16. Approx. 388g (battery included).

4. Technical Features

Accuracy: ± (a% of reading + digit); to ensure accuracy, ambient temperature: (23±5)℃, RH＜75%; calibration warranty period as one year from ex-works date.

Instructions and ambient restriction: use for outdoors Max. height: 2000m

Safety: IEC 61010, CATII 600V, CATIII 300V

Public nuisance level: 2

Operating temperature and humidity:

0℃ to 30℃ (less than R.H 80%);

30℃ to 40℃ ( less than R.H 75%);

40℃ to 50℃ (less than R.H 45%);

Storage temperature and humidity:

-20℃ to +60℃ (less than R.H 80%)

General Characters

VICTOR Instruments is a brand belongs to Xi'an Beicheng Electronics Co.Ltd. (former Victor Instruments ) which was established in 1980s,VICTOR specializes in producing test instruments and especially digital multimeters. Our products include analog and digital multimeters, clamp-meters, calibrators , megohmmeters, thermometers, tachometers, vibrometers, lux meters, function generators, frequency counters, oscilloscopes and other electronic testing and measuring equipment.

We also provide electronic test tools, measurement solutions, environmental products and ODM and OEM services to specific customers.

As before, our factory(Shenzhen VICTOR Hi-Tech Co.,Ltd.) is in Shenzhen city, To expand production demand,we moved to Xi'an city in 2013. And then we registered two new trademarks (YITENSEN and Ruoshui) in year 2017 for promotion of our VICTOR products to overseas market.

With over 30 years , VICTOR instruments has been focused on the full range of electrical testing and analyze instruments ,it is renowned as one of the largest manufacturers and suppliers of innovative, quality handheld test, measurement and inspection tools in the world.

Nowadays, we have agents and representatives in every city of China. Meanwhile, we successfully enter the overseas market in many countries. We strive to provide the best products and most considerate services to all customers.

Our Manufacturing Capability

VICTOR Instruments are designed and manufactured in our Xi'an Beicheng manufacturing center, a modern, automated, high-tech industrial park produces digital multimeter 10,000pcs/day , with pass rate 99.6%. With more than 300 skilled workers and 50 R&D staff ,our manufacturing center covers an area of more than 30,000 square meters , made up of : -8 dust-free workshops; -5 fully automatic production lines -12 sets of state-of-the-art production equipments.