3218A Digital Clamp Multimeter Automatic Range For AC DC Current

3218A Digital Clamp Multimeter Automatic Range For AC DC Current

VICTOR DM3218A Digital Clamp Multimeter 3218A Manual Range Multimeter AC Clamp Meter LCD display with 50mm clamp jaw

1. Introduction

Welcome to choose this product!

The series are a kind of 3 1/2 bit portable digital Clamp-Shape meter, with manual range and automatic range, which may measure AC & DC current and voltage, resistance, test for connection and disconnection, positive voltage on diode, temperature, frequency, phase sequence etc.. It can intelligently be zero at DC current range so long as it is turned on. In general, the zero button needn’t be pressed. The meter is equipped in 1100V surge dischargers, which can more effectively protect the meter. The meter is the ideal tool of the industries of electricity, electronics and refrigeration due to wonderful structure, easily operated, more portable.

2. Safety

The meter is designed in accordance with the safety requirements of the standard IEC1010-1. Please Carefully read this manual before operate it.

2.1 Note for safety symbols:

Warning hint, Caution!

Danger by high-voltage shock!

Double insulation protection

2.2 During measuring, any range may not exceed its input value in Max

2.3 At resistance range, not allowed to impose voltage on input

2.4 During measuring, to prevent the meter from damage, do not turn its round switch to change its range.

2.5 Over DC60V or AC30V may be shock danger, carefully operating during measuring.

2.6 During clamping non-insulation wire, must specially be careful to avoid

2.7 During measuring current, fingers must be placed on the back of the armguard of the meter.

2.8 The meter shall avoid straight sunlight, high temperature and humidity.

2.9 After measuring end, the turning switch shall be at OFF.

2.10 Idling for long term, its batteries shall be taken out to prevent the batteries from leaking liquid to damage parts.

3. Features

3.1 Displaying mode: LCD displayer

3.2 Maximum display: 1999(3 1/2bit)

3.3 Maximum open: 30mm

3.4 Automatic negative indication: Displaying “-“

3.5 Low battery indication

3.6 Operating environment: 0℃~40℃,70%RH(Max.)

3.7 Storage environment: -20℃~60℃,85%RH(Max.)

3.8 Power supply: 9v battery (IEC6F22, NEDA1604, JIS006P or equivalent types), automatic range Clamp-Shape meter AAA type two 1.5v batteries.

3.9 Automatically power off (automatic range): The meter shall automatically be switched off (sleeping state) to save energy without range changed within 15 minutes after switching on. To cancel the function on automatically power off, only as switch on the meter, press HOLD button, then the function is cancelled. Under the function, press the effective switches of the function (panel instruction) or turn the turnplate, the meter shall automatically be switched on.

3.10 buzzer

Automatic range is chosen at any measuring range (2A/20A exception) pressing any function button which normally works, then the buzzer shall make sound once, if the function button doesn’t normally work, the buzzer is mute. The buzzer shall make sound for five times for warning.

3.11 Size 213(Length)375(Width)332(Height)mm

3.12 Weight: about 240gram(with batteries)

4. Technical Data

5. General Characters

VICTOR Instruments is a brand belongs to Xi'an Beicheng Electronics Co.Ltd. (former Victor Instruments ) which was established in 1980s,VICTOR specializes in producing test instruments and especially digital multimeters. Our products include analog and digital multimeters, clamp-meters, calibrators , megohmmeters, thermometers, tachometers, vibrometers, lux meters, function generators, frequency counters, oscilloscopes and other electronic testing and measuring equipment.

We also provide electronic test tools, measurement solutions, environmental products and ODM and OEM services to specific customers.

As before, our factory(Shenzhen VICTOR Hi-Tech Co.,Ltd.) is in Shenzhen city, To expand production demand,we moved to Xi'an city in 2013. And then we registered two new trademarks (YITENSEN and Ruoshui) in year 2017 for promotion of our VICTOR products to overseas market.

With over 30 years , VICTOR instruments has been focused on the full range of electrical testing and analyze instruments ,it is renowned as one of the largest manufacturers and suppliers of innovative, quality handheld test, measurement and inspection tools in the world.

Nowadays, we have agents and representatives in every city of China. Meanwhile, we successfully enter the overseas market in many countries. We strive to provide the best products and most considerate services to all customers.

Our Manufacturing Capability

VICTOR Instruments are designed and manufactured in our Xi'an Beicheng manufacturing center, a modern, automated, high-tech industrial park produces digital multimeter 10,000pcs/day , with pass rate 99.6%. With more than 300 skilled workers and 50 R&D staff ,our manufacturing center covers an area of more than 30,000 square meters , made up of : -8 dust-free workshops; -5 fully automatic production lines -12 sets of state-of-the-art production equipments.