VC63B Vibrometer Rotating Machinery 1999μM Vibration Testers Mechanical Frequency Meter

Rotating Machinery 1999μM Vibration Testers Mechanical Frequency Meter

VC63B Vibration Meter 0~1999um Measure Vibration Displacement RMS Of Vibration Velocity Acceleration Of Rotating Machinery

Vibration meter is composed of acceleration transducer and digital measurement display circuit. It is used to measure vibration displacement(peak-to-peak displacement) ,RMS of vibration velocity and acceleration of rotating machinery. It’s measured value can be latched, When the voltage is low, the screen will be prompted to. In a minute if there is no measurement, it will automatically shut down. It’s wide measuring range, easy to operate and carry, etc. Therefore, it is an ideal instrument inspection.

SPECIFICATION

1. Measurement range: acceleration : 0.1～199.9m/s² (Semi-peak)
Velocity:0.1～199.9mm/s (RMS)
Displacement amplitude:1 ～ 1999μm(peak to peak)

2. Frequency response: acceleration : 10Hz～1000Hz ,≤±10%

Velocity: 10Hz～500Hz,≤±10%

Displacement amplitude:10Hz～200Hz, ≤±10%

3. Linearity and Accuracy

Displacement: 0～20μm,≤±10% ＞20μm, ≤±5%

Velocity: 0～2.0mm/s, ≤±10% ＞2.0mm/s, ≤±5%

Acceleration : 0～2.0m/s², ≤±10% ＞2.0m/s², ≤±5%

4. Display : Three semi-digital liquid crystal display

5. Power supply:laminated battery (9V),one piece

6. Low voltage indication: When the battery voltage drops below 5.5V, the screen will prompt low voltage, then replace the battery with new one. In a minute if there is no measurement, it will automatically shut down.

7. Hold function: The displayed vibration value is frozen and kept for one minute after the MEAS button is released .

8. Environmental: Environment temperature : 0 ～ 40 ℃ relative humidity: ≤ 80%

atmospheric pressure : 75 ～ 106kpa

9．overall dimensions:185(H)×68(W)×30(D)mm

10. Weight: 380g(including battery)

OPERATION

Loading battery

1. Loading battery
Open the battery compartment Lid, load a 6F22 battery in the battery compartment with correct polarity ,close the Lid.

2. Checking Battery Voltage
Press the MEAS button and observe the display. If a battery mark appears on the display(left side),replace the battery with new one. If no such mark appears, the meter is ready for measuring.

3. Setting Measurement Mode
Select the acceleration, velocity or displacement measurement mode with the mode selector. The selected mode is indicated by the arrow on the right of the display.

4. Measurement
Magnet to the object’s Vibration vertical cross-section.
Link of the sensor insert the input socket of the sensor, Press the MEAS button(power on) and keep the button depressed, the vibration value is now indicated on the display. By releasing the MEAS button, vibration value at that moment is frozen on the display .Now you can detach the probe from the object and read the displayed value.

5. Press MEAS button again to reset the hold function and repeat measurement.

NOTICE

It can not in a strong magnetic field, corrosive gas and massive attack environment .

Instrument and the sensor is the whole structure, can not close down and not making arbitrary adjustment on the internal potential.

when displayed cell to replace the mark, replace the battery.

When the instrument are used for a long time , please take out the battery, and avoid corruption.

COMMON FAULTS

VICTOR Instruments is a brand belongs to Xi'an Beicheng Electronics Co.Ltd. (former Victor Instruments ) which was established in 1980s,VICTOR specializes in producing test instruments and especially digital multimeters. Our products include analog and digital multimeters, clamp-meters, calibrators , megohmmeters, thermometers, tachometers, vibrometers, lux meters, function generators, frequency counters, oscilloscopes and other electronic testing and measuring equipment.

We also provide electronic test tools, measurement solutions, environmental products and ODM and OEM services to specific customers.

As before, our factory(Shenzhen VICTOR Hi-Tech Co.,Ltd.) is in Shenzhen city, To expand production demand,we moved to Xi'an city in 2013. And then we registered two new trademarks (YITENSEN and Ruoshui) in year 2017 for promotion of our VICTOR products to overseas market.

With over 30 years , VICTOR instruments has been focused on the full range of electrical testing and analyze instruments ,it is renowned as one of the largest manufacturers and suppliers of innovative, quality handheld test, measurement and inspection tools in the world.

Nowadays, we have agents and representatives in every city of China. Meanwhile, we successfully enter the overseas market in many countries. We strive to provide the best products and most considerate services to all customers.

Our Manufacturing Capability

VICTOR Instruments are designed and manufactured in our Xi'an Beicheng manufacturing center, a modern, automated, high-tech industrial park produces digital multimeter 10,000pcs/day , with pass rate 99.6%. With more than 300 skilled workers and 50 R&D staff ,our manufacturing center covers an area of more than 30,000 square meters , made up of : -8 dust-free workshops; -5 fully automatic production lines -12 sets of state-of-the-art production equipments.