2.9-104.9t 4RPM Rotary Drum Drying Machine For Amylaceum Glucose Dextrose
Brand Name:JingSu ShengMan
Certification:CE and ISO9001
Model Number:HZG
Minimum Order Quantity:1set
Delivery Time:60-90days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu China
Address:
zhenglu town, tianning district, changzhou city, JIangsu Province
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Customizable HZG High Efficiency Continuous Rotary Drum Dryer for amylaceum/glucose/dextrose
Work Principle
Rotary Drum Drier is a kind of dryer with rotating cylinder body
which is a little bit incline. The wet material is loaded from
one end from the screw material adding device continuously, and is
stirred by the bafflers that are uniformly distributed in the
barrel.The material is uniformly distributed and dispersed in the
dryer and fully contacts the hot air of counter flow. When the
material passing through the cylinder inside surface, it will
contact with the hot air circling inside and being dried .Most of
the dried product will be discharged from the other end of the
dryer. Small part of the fine granule goes into the cyclone
separator with the exhaust air. The powder will be separated and
collected, and the exhausted air will be ejected to the atmosphere.
During the drying course, the material will slowly move to the
lower end from the higher part recur to the slowness rotating of
the cylinder
Technical parameters
| raw material | ore | vesicant | slag of blast furnace | coal |
| amount to be treated (kg/h) | 1000 | 466 | 15000 | 5000 |
| primary moisture(%) | 30 | 13 | 6 | 6.5 |
final moisture (%) | 15 | 0.3 | 1 | 0.1 |
| average diameter(mm) | 6.5 | 0.05 | 4.7 | 5 |
| amount of hot air(m³/kg) | 39000 | 5400 | 10750 | 16000 |
| temp of air at inlet (℃) | 600 | 165 | 500 | 570 |
| temp of material at outlet(℃5) | 42 | 100 | 75 | |
| way of heating | gas | electric | heavy oil | heavy oil |
| revolution (r.p.m) | 4 | 4 | 3.5 | 2 |
| length of dryer | 20 | 12 | 17 | 16 |
Application
This dryer widely used in the following industries:
- Drying large particles and heavy material for chemical, mining,
metallurgy and other industries, such as: mining, blast furnace
slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special
requirements, such as: HP vesicant, lees residue, precipitated
calcium carbonate, activated clay, magnetic powder, graphite,
dregs.
- Drying the material which required low-temperature and continuous
drying process.
Working process:
Rotary dryer adopts direct flow type of heating with heat soure from firing unit. The material to be dried is pushed back immindiately by spiral board when enters the shell from feeding tank and feeding chute. Because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.
Our services
We have a professional engineer team responsible for the pre sales technical consultation, technical solution in the process of sales, installatin, commissioning and after sales service for customers. Every year, we will send engineers to our overseas customer site to help customers inspect and maintain the equipment.
FAQ
Q1: Are you trading company or manufacturer?
A: We are factory.
Q2: How long is your delivery time?
A: Generally it is 7-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q3: What is your payment method?
A: 30% of total price should be paid by T/T as down payment; 70% balance payment should be paid by T/T before delivery.
Q4: What Information should customers give us, So that we can be able to provide you suitable quotation and service.
What minerals are you separating?
What's the maximum size of your raw minerals?
How much capacity do you need per hour for your project?
Q5: How long is the warrenty of your equipments? Does your company
supply the spare parts?
A: The warranty period of crusher equipments is one year. and we will supply the spare parts for you at lowest cost.
A: The warranty period of crusher equipments is one year. and we will supply the spare parts for you at lowest cost.
2.9-104.9t 4RPM Rotary Drum Drying Machine For Amylaceum Glucose Dextrose
Inquiry Cart
0