SUS304 Drum Drying Machine

Good Price Customize Compact Structure Rotating Cylinder Scraper Drum Dryer for Thick Sludge

Drum Scraper Dryer Equipment

The drum scraper dryer is an internal heating conduction type rotary continuous drying device. The rotating drum is adhered to a film of a thickness through the lower trough, and the heat is transported to the inner wall of the drum through the pipeline, and is conducted to the outer wall of the drum, and then the feed film is transferred, so that the humidity in the film is evaporated and dehumidified. The moisture-containing material is dried. The dried material is scraped off the drum by the scraper attached to the surface of the drum, to the screw conveyor placed under the scraper, and the dry material is concentrated and packaged by the screw conveyor.

Working principle of roller scraper dryer

Drying process: Let the liquid or muddy material form a film on the surface of the drum heated by steam or other heat carriers. The drum is dried in one revolution. The product is scraped off with a scraper, and the exposed surface of the drum comes into contact with the raw material again. And form a film to dry.
The drum scraper dryer uses a certain method to spread the liquid or pasty material on the drum (hollow metal cylinder) with a 0.1-1.5mm film. The drum can be heated with steam, hot water or thermal oil. When the drum rotates once, the material can be dried and scraped off the surface of the cylinder by a special scraper. The drum scraper dryer generally rotates at a speed of 4 to 6 rpm.
The drying of the paste-like material is to adjust the thickness of the material and to compact the material layer. On the side close to the feeding device, a material compression shaft is installed to make the material evenly spread on the drum. In order to make the material easier to fall off when the scraper discharges the material, before the scraping, the cold air pipe can also be used to blow a certain amount of cold air to cool the material.

Technical parameters

Applications

It can quickly dehydrate and dry materials with high humidity to achieve the effect of turning waste into treasures. It is one of the most important dehydration and drying equipment in the drying industry. It is suitable for drying liquid and viscous materials in chemical, dye, pharmaceutical, food, metallurgy, yeast and other industries.

Features of drum scraper dryer

Large operation flexibility and wide adaptability, the operation flexibility of the drum dryer is very large, and can adapt to the requirements of multiple materials and different output;
2. The thermal efficiency of the roller scraper drying is high;
3. The drying time is short, the wet material film of the material to be dried on the outer wall of the drum is generally 0.3 to 1.5 mm, and the entire drying cycle takes only 10 to 60 s;
4. Large drying rate: Because the material film is very thin, the surface of the material film can maintain the drying strength of 15-50kg water/m2h;
5. Continuous operation, stable quality, labor saving, and uniform product can be obtained;
6. The inside of the machine is easy to clean, and it is easy to change the variety;
7. Exhaust gas does not take away materials, and no dust removal equipment is required.

Sale service:

In order to fulfill the contract smoothly, establish a good cooperative relationship, here's are several points what we must do.
(1). ensure product with high quality and pre-commissioning before delivery
(2). delivery on time
(3). provide full set of documents as customer’s requirements

After-sale service:
Provide considerate services to minimize customers’ worries.
(1). Assist customers to prepare for the first construction scheme.
(2). Install and debuging the drying equipment.
(3). Train the first-line operators.
(4). Exame the drying equipment.
(5). Take initiative to eliminate the troubles rapidly.
(6). Provide technical support.
(7). Establish long-term and friendly relationship with all my customers.

Service commitment:
We provide customers 12-months warranty to make sure the machine work well, and always keep certain inventory level of spare parts, which means the replacements can be sent to you timely. At the same time, we send every customer a preferential and reasonable quotation.

Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established in 2011, known as a local leading high-tech enterprise, is located in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a large-scale production enterprise in China drying industry with a registered capital of 100,000,000 RMB, specialized in designing &manufacturing various kinds of dryers, granulators, mixers, grinders ,dust removers, etc. Shengman owns an area of over 200,000㎡, and realizes annual sales of over 70,000,000RMB for consecutive years. Shengman has passed European Union CE authentication, ISO 9001 quality management system certification and got good bank credit for AAA. Now Shengman has been one of the largest drying equipment production enterprises in East China and keeping leading the drying industry’s development.