PVC Pipe Production Line / PVC Pipe Extrusion Machine 16mm - 32mm In 4 Stations

Pvc Pipe Production Line / Pvc Pipe Extrusion Machine 16mm - 32mm In 4 Stations

Pvc Pipe Production Line / Pvc Pipe Extrusion Machine Production line composition

Auto loader - Conic twin screw extruder HYZS65/132 - Die head - Vacuum tank - Printer - Haul off unit - Cutter - Stacker

Pvc Pipe Production Line / Pvc Pipe Extrusion Machine HYPET advantages of 16-32mm PVC Four head conduit line

a. It can be equipped with high-efficiency and high-yield extruder, with large output and low energy consumption, and the output can reach 12 tons/day
b. Siemens PLC controls the entire production line, HYPET software, and high configuration
g. Bimetal barrel screw, with a shelf life of 3 years
h. The traction is controlled by a servo motor, and the speed can reach 20m/min
i. It can be equipped with a four-tube packaging machine to achieve a fully automatic control production line
j. High cost performance, high quality and lowest price.

Pvc Pipe Production Line / Pvc Pipe Extrusion Machine Configuration list

Note: This table as attached file, which is for selection of the configuration on the whole line

1. Pvc Pipe Production Line / Pvc Pipe Extrusion MachineTechnical features of whole line

Pvc Pipe Production Line / Pvc Pipe Extrusion Machine Terms & conditions

1. Training and services

1) Instruction of field installation

2) Equipment field debugging and trial run if required by the buyer according to the rule.

3) Training on field operation and maintenance for customer's personnel.

4) Provide technical consultation service on long-term basis.

2. Installation and debugging

When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved, in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.

1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.

2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.

3) This Price does not included commission and installation in buyer’s factory.

3. Pricing

1) The above mentioned quotation is valid within 30 days counted from the issue date of quotation.

2) The price and machinery configuration should be updated and confirmed by the Seller in the case that the quotation has been beyond the validity period.

3) The above mentioned quotation is based on Ex works. Sea transportation and wooden case packing is excluded.

4) The price does not cover the cost of testing material. The testing material will be supplied by the Buyer. Or the Seller will purchase the material as requested by the Buyer at Buyer's cost.

5) The price does not include the cost of commissioning at Buyer's site.

The Seller reserves the right to modify the specification and design of the machine in order to enhance the product quality.

4. Terms of payment

1) T/T and L/C (irrevocable, at sight) both are acceptable.

2) 30% of the total contract value should be paid in advance by T/T, balance 70% of the total value is to be paid before shipping at the Seller’s factory, we accept both T/T and L/C 90 days.

5. Pvc Pipe Production Line / Pvc Pipe Extrusion MachineTime of delivery

1) When the contract becomes valid, the machine should be delivered within 50 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.

2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.

Located in Shenzhen City which is the most lively and youngest top city in China, it's next to HongKong and Guangzhou City.

Shenzhen HYPET founded in 2002, and it inherits from China national extrusion machinery entrerprise. Base on Germany and Italian technology, HYPET invented and manufacture unique gear box with own patent. For these reason to keep HYPET tech and machine quality priority in extrusion machine field.

The first block type DIY plastic extruder solves the machine agents' many problem. They can easily get extruder parts from HYPET factory then assembles them in their own workshop via the installation video.

The plastic extrusion line core part is the extruder. If the extruder is good, then the line 70% is good. So HYPET offer the service to match local downstream or old downstream service.

Shenzhen HYPET machine is focus on top quality but best enconomic price. Our main plastic extrusion machine includes but not limited PVC / HDPE / PPR pipes extrusion production line, PVC and WPC all type of profiles (PVC window, ceiling, wallpanel, decking, gutter, duct...) production line, PVC plastic marble sheet line, SPC floor production line, WPC door plant, PVC foam board line, Nonweave melt blown fabric line.....

HYPET also offer the special PVC processing aid to decrease your final product cost and increase the product quaity & better shining surface.

We have a full technical team can help you design, manufacture, assemble, inspect and test the plastic machine meet your request.