

Add to Cart
Handheld 7V Heavy Duty Rechargeable Torch Light Waterproof LED Searchlight
Handheld Searchlight Rechargeable Portable Waterproof Searchlight
1. LED Explosion Proof Waterproof Searchlight
2. Explosion proof flash light with CE& RoHS
3. Use CREE LED chip as light source.
4. Battery adopts high-energy lithium battery featured with large
capacity, long lifespan, and can be recycling, it is
economical and environmental.
5. Imported high power CREE LED light source, constant current
output to ensure lights have steady brightness.
1 | Rated voltage | V | 3.7 | |||
2 | Rated capacity | Ah | 4.4 | |||
3 | light Source | Working current | Bright light | mA | 350 | |
Work light | 120 | |||||
Continuous discharge time | strong light | hours | >13 | |||
Work light | >38 | |||||
Service life | hours | about100000 | ||||
4 | battery life | times (cycles) | about1000 | |||
5 | Battery charging time | hours | 8 | |||
6 | Irradiation distance | meters | >60 | |||
7 | Total weight | g | 1860 | |||
8 | Dimensions | L×W×H | mm | 210×85×116 |
Performance characteristics:
◆ Two-level light design. The strong light source uses imported
ultra-high-brightness, high-efficiency, long-life LED solid-state
cold light source, with a luminous efficiency of more than 60lm/w
and an average life span of 100,000 hours. The auxiliary light
source is also strictly selected.
◆Using high-energy non-memory lithium battery, continuous discharge
working time is long, the main lamp strong light continuous
lighting time is more than 13 hours, which can fully meet the needs
of the shift, the auxiliary lamp working light can also be used as
power failure emergency lighting, continuous lighting time up to 38
More than hours. The charging time is only 8 hours. After a full
charge, it can be used at any time within 6 months.
◆ When the power of the lamp is insufficient during use, it can be
recharged by the hand-cranked power generation device of the lamp.
◆ The built-in protection board of the lithium battery is equipped
with overcharge, overdischarge, overcurrent and short circuit
protection devices to ensure the safety of the lithium battery.
◆ Imported bulletproof rubber shell, strong impact resistance,
safer and more reliable.
◆ Good waterproof performance, reaching IP65, can be used in any
weather and harsh environmental conditions.
◆ Magnetic absorption and the irradiation angle can be adjusted
within 120°, which completely liberates both hands.
◆ Small size, light weight, simple operation and convenient
application.
Warning:
1. When charging or disassembling the structural parts of the lamp,
it must be carried out in a safe place;
2. Charge it in time after each use.
Matters needing attention:
When charging or continuously discharging in a place with a high
ambient temperature, the surface of the lamp holder shell heats up
slightly, which is a normal phenomenon.
Wipe it with a wrung out damp cloth during maintenance.
How to use:
◆ When in use, press the black button under the handle with your
hand to switch between strong light and working light.
◆ Insert the charger plug into the charging jack on the lower right
side of the battery box and observe the charging indicator. When
the charger indicator turns from red to green, it means normal
charging starts. After the battery is fully charged, the indicator
turns to green again.
◆ After a full charge, it can be used at any time within 1 year; if
it is left unused for a long time, it is better to recharge it for
about 6 hours every six months.
◆ During use, when the battery power is about to run out, the
brightness of the lamp will decrease sharply. At this time, stop
and recharge.