

Add to Cart
Light Weight 120W 120Lm WaterProof LED Flood Lights For Garage
120W High Power Ultra Light Weight LED Road Lamp Aluminum IP65 Waterproof
This product is suitable for lighting in places and facilities such as factory roads, highways at all levels, and urban arterial roads.
Rated voltage V | AC220V |
Operating voltage range V | AC100-305V |
Power(W) | 120W |
Rated frequency Hz | 50Hz |
Light source | LED solid state cold light source |
Color rendering Ra | greater than 80 |
Protection grade | IP66 |
Working temperature | -40~+50 |
Anti-corrosion grade | WF2 |
Power factor | >0.95 |
Start-up time(min) | Instant |
Restart time(min) | Instant |
Shell material/thickness(mm) | 3 |
Insulation class | I |
Distance to height ratio | 2 |
Inlet cable | Φ8-Φ10mm |
Dimensions | 745*292*98mm |
Light efficiency(Lm/W) | 120Lm/W |
Life(H) | 100000 |
Color temperature(K) | 3000/4000/5700Koptional |
Weight(Kg) | 8Kg |
Beam angle | 60 degrees |
Features:
◆ The electrical appliances adopt the Taiwan MEAN WELL drive power
supply, which is recognized as the most stable and most expensive
in the industry, with long continuous service life and stable and
reliable quality.
◆ The light source adopts imported high-end brand solid-state
maintenance-free LED light source with high luminous efficiency and
a life span of 100,000 hours, which is truly green and
environmentally friendly.
◆ The light source is completely isolated from the electrical
appliances, which completely solves the heat radiation problem and
greatly extends the service life of the lamp.
◆ Adopt aerospace industry aluminum heat sink, through a
professional system heat dissipation design, strictly control the
temperature rise, effectively reduce the light attenuation, and
greatly improve the service life of the lamp.
◆ The control circuit adopts precise constant current control, with
short-circuit, over-voltage, and over-power protection; compatible
with wide voltage input, not affected by power grid fluctuations;
realizing instant cold and hot start.
◆ Water-proof, dust-proof and moisture-proof, suitable for outdoor
use in rainy and snowy weather.
Instructions:
◆ After determining the appropriate installation position of the
lamp according to the site environment and lighting needs, prepare
the corresponding three-core cable according to the length of the
lamp to the 220V power connection;
◆ In the selected installation position, install and fix the lamp
with a light pole;
◆ After the lamp is fixed, the lamp must be fully grounded, and the
cross-sectional area of the external grounding protection wire
cannot be less than 4mm²;
◆ When the power is turned on, the power must be turned on
according to the voltage specified on the nameplate.
Note that the brown wire of the external cable of the lamp is
connected to the power live wire (ACL), the blue wire is connected
to the power neutral wire (ACN), and the yellow-green wire is
connected to the power ground wire.
Precautions:
◆ Pack the lamps in the provided carton during transportation, and
install foam shock absorption;
◆ After the lamp is installed, check whether the lamp is connected
to the electricity correctly, and whether the lamp is fully
grounded;
◆ Do not turn on the power before the lamp is fixed;
◆ When using, there is a certain temperature rise on the surface of
the lamp, which is a normal phenomenon. ◆When cleaning the lamp,
the power switch of the lamp must be cut off and the lamp can be
cooled down.
◆ This lamp adopts Y-type connection: If the external cable of this
lamp is damaged, the line must be replaced by our company or
service agent or a similarly qualified person to avoid danger.
Warning: It is strictly forbidden to open the cover when the power
is on!