VA520 Air Gas Flow Meter For Continuous Flow Measurements CS Flow Meter VA500
Brand Name:CS
Certification:ISO CE
Model Number:VA500
Minimum Order Quantity:1
Delivery Time:5-10 working days
Payment Terms:T/T, Western Union ,paypal
Contact Now
Add to Cart
Verified Supplier
Address:
Rm. 1203-1, Bldg. B, Xian Xinsilu International E-Commerce Industrial Park, No. 9, Gangwu Road, Int'l Port District
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
Descroption of VA520 Gas And Air Flow Meter For Continuous Flow Measurements CS Flow Meter VA500 With Display
Thermal mass flow sensor for compressed air and gases
Recording and reducing energy costs and CO2 emissions while
increasing the sustainability of any compressed air system. With
our VA500 it is possible to monitor your consumption and analyze
your leakage flows with just one measuring device. Due to its
design, it is also ideal for mobile measurements.
Specification of VA520 Gas And Air Flow Meter For Continuous Flow Measurements CS Flow Meter VA500 With Display
| 1 | Special features of flow sensor VA 500: |
| 2 | 04...20 mA, pulse and a Modbus RTU (RS 485) interface as standard. |
| 3 | Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus Optional: Bi-directional measurement |
| 4 | Pressure tight up to 50 bar |
| 5 | Temperature range up to 110°C |
| 6 | Protection class IP65 |
| 7 | Integrated display for showing the measured values |
| 8 | Can be used from 1/2" up to 40", larger diameters on request |
| 9 | Easy installation under pressure |
| 10 | Settings can be changed via the display |
| 11 | Suitable for gas velocities up to 224 Nm/s |
| 12 | Main counter reading can be reset via the display |
| 13 | Highly precise with an accuracy of ± 1.5% or ± 1% of the measured value ± 0.3% of the final value |
Detailed images of VA520 Gas And Air Flow Meter For Continuous Flow Measurements CS Flow Meter VA500 With Display
Features of VA520 Gas And Air Flow Meter For Continuous Flow Measurements CS Flow Meter VA500 With Display
1) even under pressure , the flow sensor VA 500 is mounted by means
of a standard 1/2“ ball valve. During mounting and dismounting the
safety ring avoids an uncontrolled ejection of the probe which may
be caused by the operating pressure.
For the mounting into different pipe diameters VA 500 is available
in the following probe lengths: 120, 160, 220, 300, 400 mm.
So the flow sensor are being mounting intoexisting pipelines with
inner diameters of 1/2“ upwards.
The exact positioning of the sensor in the middle of the pipe is
granted by means of the engraved depth scale. The maximum mounting
depth corresponds with the resprective probe length. Example: VA
500 with probe length 220 mm has a maximum mounting depth of 220
mm.
2) If there is no suitable measuring site with a 1/2“ ball valve
present there are two simple possibilities to set up a measuring
point:
A Weld on a 1/2“ screw neck and screw on a 1/2“ ball valve
B Mount spot drilling collar incl.
ball valve (see accessories)
By means of the drilling jig it is possible to drill under pressure
through the 1/2“ ball valve into the existing pipeline. The
drilling
chips are collected in a filter. the the probe can be mounted as
described under point A
3) Due to the large measuring range of the probe even extreme
requirements to the consumption measurement (high volume flow in
small pipe diameter) can be met.
The measuring range is depending on the pipe diameter - see table
on the right hand side.
FAQ
Q: How long will you reply me?
A: We will contact you as soon as possible but within 12 hours.
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q: How do you control your quality ?
A: Three inspection steps(of original, production, and finished
goods) + good warranty service(1 year free to change a new one
without any human damage factors).
Q: What certificates do you have ?
A: ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q: Could I visit your factory?
A: Very welcome! Fly to Xian Yang air port. It was a big pleasure
for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q: Can you provide OEM & Customized service?
A: Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
VA520 Air Gas Flow Meter For Continuous Flow Measurements CS Flow Meter VA500
Inquiry Cart
0