

Add to Cart
Submersible type water level sensor transmitter is comsed of full sealed isolation membrane filled level sensor
and special instrument circuit. With the advantages of high measuring precision, good stability, long service
life, convenient installation, etc.With unique technology of sealing structure form, and good anti-leakage performance, immersed in a liquid reliable operation for a long time.
>>
> >
Load (Ω)
Current (2-wire system): ≤ (power supply voltage-8V) /0.02A
Voltage (3-wire system):> Maximum output signal / 1mA
Proportional voltage (3-wire system):> 10K
Supply voltage
> >
Total current consumption
Current (2-wire system): signal current, maximum 25mA
Voltage (3-wire system): 2.5mA
Proportional voltage (3-wire system): 2.5mA
> >
Long-term stability
> >
Anti-vibration
10g (IEC 60068-2-6 standard, under resonance conditions)
Impact resistance
500g (IEC 60068-2-27 standard, mechanical shock)
Service life
1 million pressure cycles
> >
> >
> > > >
1.Prevent from the surge voltage, over-voltage, over-current and
the protection of reversed polarity;
2.Do the test to make sure the ability of overload resistance and
shock resistance,precisely ensure the overloadcapacity;
3.Implement the electromagnetic interference resistance to avoid
the problem taken place under the condition of complicated
electromagnetism environment;
4.All sensitive chips are from the imported OEM parts,in order to
keep the long-term stability.
>>
CODE | Level transmitter mode |
2088T A | Cable type |
CODE | Measurement Range |
1 | (0-1)mH2O |
2 | (0-5)mH2O |
3 | (0-10)mH2O |
4 | (0-20)mH2O |
5 | (0-30)mH2O |
T | Special specification |
CODE | Accuracy grade |
1 | 0.2 |
2 | 0.5 |
CODE | Explosion proof type |
N | Standard type |
i | EX iaⅡCT6 |
d | EX dⅡBT4 |
CODE | display |
M0 | None |
M1 | LCD digital display |
CODE | Output |
E | 4~20mA |
V | 0-5V |
S | 0-10V |
T | Special specification |
CODE | Probe material |
A1 | SUS304 |
A2 | SUS316L |
CODE | Cable sheath material |
B1 | Polyethylene rubber |
B2 | PTFE |
B3 | Teflon |
CODE | Power supply |
V1 | 24V DC |
V2 | Special specification |