

Add to Cart
connecting rod float type level gauge
Description connecting rod float type level gauge
The connecting rod float level gauge uses the magnet in the floating ball to change with the liquid level to change the partial pressure circuit composed of the resistance in the connecting rod and the reed switch. The partial pressure signal can be converted into 4-20mA or other through the converter. different standard signals. The smaller the gap of the reed switch, the higher the accuracy
Parameter connecting rod float type level gauge
Material | default 304 stainless steel, can be customized 316L, PP, PTFE |
Length | The switching value is not less than 100MM single point, the continuous volume is not less than 500MM, and the maximum length is 5 meters |
Contact capacity | 50W/250VAC, 200VDC 40W/250VAC 10W/110VAC |
Rated current | 0.2A (50w) , 0.16A (40W) , 0.1A (10W) |
Working current | 1A (50W,40W) , 0.5A (10W) |
Pressure resistance | (-1.0-3.5)MPa metal type (O-0.5) MPa plastic type |
[Temperature | -20°℃-120°C (200°CMax) |
Float size | 25/25/45/50/75/110mm |
Guide diameter | 8/12/14/16/20mm |
Connection type | Thread type, quick chuck type, flange type, etc. |
Dimension connecting rod float type level gauge
1. Simple mechanism, convenient installation and long service life
2. Not affected by steam, foam, liquid volatile gas
3. The indicating mechanism is completely isolated from the
measured medium, with good sealing performance and safe use
4. High temperature resistance, the highest temperature resistance
is 280 ℃, and it can be applied to a variety of corrosive media
5. A variety of materials can be selected, suitable for various
occasions
6. Stable and reliable performance, strong anti-interference
ability