

Add to Cart
Motorized Automated Sliding Gates Telescopic With Anti Collision
HSG61B
Features:
1. Wiresless Remote Control (433MHz)
2. Suitable For:
a. Factory Entrance
b. Bungalow main-gate
c. Private Residential Area
d. Condominium Entrance
e. Garrage entrance
3. EMO Button (Emergency Stop Button).
4. Industrial Grade Aluminium Alloy (6063-T5).
5. Powder Coating With Compliance Of AAMA2203
6. Dispatch In Modules Form (Transportation Friendly).
7. 100% No-Welding Points
8. Smart Power Outage Clutch For Operating During Power Failure
9. Anti- Collision IR Sensor with up to 60cm
10. Anti- Climb Photo Cell With up to 30m
11. Folded Design - Maximise and Fully Utilized The Opening Spaces
Material Specification:
Description | Material | Hardness (HW) | Specification (mm) |
Upper Beam | 6005-T5 | 13-17 | 115*80*d3 |
Lower Beam | 6003-T5 | 10-17 | 135*80*d3-4 |
Front Gate Frame A/ Rear Gate Frame | 6003-T5 | 10-13 | 110*80*d2.0 |
Front Gate Frame B | 6003-T5 | 10-13 | 80*80*d2.5 |
Cross Tube | 6003-T5 | 10-13 | 35*29*d1.0 |
Auxillary Gate Frame | 6003-T5 | 10-13 | 70*25*d1.0 |
Supportive Bar | SUS304 | 10-13 | 42*44*d2.0 |
Front/Rear Upright Post | 6003-T5 | 10-13 | 180*100*d3.0 |
Rail | 6003-T5 | 10-13 | 25*18 |
Technical Specification:
Operation Voltage | 220V± 10%, 50Hz-60Hz |
Operation Temperature | -25ºC to +70ºC |
Environment Humidity | < 90% |
Operation Speed | 18m/min |
Motor Power Rating | 500W |
Motor RPM | 1400r/min |
IP Rating | IP54 |
Insulation Grade | F |
Speed Reduction Ratio | 30: 1 |
Remote Distance | 50m (empty space) |
Q: How do you ship it out to worldwide customers?
A: We take all necessary precaution before its dispatch from the factory. The most inner layer is wrapping up with a thin layer of shrink wrap, then follow by a customized EPE form to firmly secure its position within the carton box.
Q: Do you take any additional precaution if we only purchase a few sets whereby we going to ship it via LCL?
A: Yes, we will place 4 sets of the well-packed crowd control barriers on upright position and sitting firmly on top of a plywood pallet.
Q: Do you go through the fumigation process before exporting the goods?
A: Due to the facts that all packaging are non-timber material, and same goes to the pallet is made of plywood which we don’t have to worry about fumigation certifications
Q: Do you have any export experience?
A: Yes, our company have more than 16 years of experience of exporting such innovative and unique products to all over the world
Warranty:
1. Drive Motor is warranted against manufacturer’s defect for lifetime
2. Standard warranty for all components is valid for 12 months from the date of delivery
3. This warranty does not include damages caused by:
a. Wear and Tear
b. Theft
c. Accidents
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)
Project References: