350mm Electrical Appliance Tester
Brand Name:Shice
Certification:CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Model Number:SC-TB
Minimum Order Quantity:1 piece
Delivery Time:in 15 working days
Payment Terms:T/T, Western Union, MoneyGram, L/C
Contact Now
Add to Cart
Active Member
Location:
Guangzhou China
Address:
#1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
Cellphone Drum Drop Test Machine Phone Tumbling Barrel Apparatus
Product introduction:
This machine is suitable for mobile phone, PDA, electronic
dictionary, CD / MP3 for continuous rotation (drop) test.
Applicable standard: IEC60068-2-32
Test standard: there are two specifications of the tester:
IEC-60884-1, VDE and BS1363.
Test method: the plug including the power line at the back end is
cut off at a position of 100 mm. As a test piece, it is put into
the roller.
According to the weight of the test piece, the rolling times are
set to make the test piece fall down continuously, and then check
the damage degree of the test piece.
Parameters:
No | Item | Data | ||
1 | Allowable weight of test piece | 5kg (max) | ||
2 | Falling height | 500mm or 1000mm (can be specified) | ||
3 | Drum width | 350mm | ||
4 | Rotation speed | 5-20 times / min | ||
5 | Test times | 1-999999 (can be set) | ||
6 | Machine size (w * D * h) | 1020 * 810 * 1170mm 2400*1200*1350mm | ||
7 | Power supply | AC 220 V or specified | ||
Tips for use:
1. Place the machine in a horizontal position.
2. Turn on the power cord and turn on the power switch.
3. Set the counter and set the required number of tests.
4. During the test, open the cylinder cover (if the position is not
directly above, start the power supply first, press the start key
"start" to turn the cylinder cover to the top
5, then press the stop key "stop"; then put the test piece into the
cylinder and close the cylinder cover).
6. Press the start key "start" and the drum starts to rotate.
7. When the counter reaches the set number, it will stop
automatically.
8. Take out the test piece and check its damage degree.
List of tumbling barrel apparatus:
| Model | TB-1 | TB-2 |
| Power Supply | 220V 50Hz or 115V 60Hz | 220V 50Hz or 115V 60Hz |
| Speed of rotation | 5 r/min | 5 r/min |
| Feel times | 10 times/min | 10 times/min |
| counter | 0~9999 | 0~9999 |
| Material | 3 mm steel | 3 mm steel and Block of wood and plastics laminated sheet |
| Height | 650 mm | 675 mm(or 1175) |
| Dimension | W*D*H=630mm x 600mm x 1250mm | W*D*H=630mm x 600mm x 1250mm |
| Chute Length | 275mm | 275mm |
| Conforms to standard | VDE0620.1 IEC60598 | IEC60068-2-32, IEC60884.1, EN50075 |
| Model | TB-3 | TB-4 |
| Power Supply | 220V 50Hz or 115V 60Hz | 220V 50Hz or 115V 60Hz |
| Speed of rotation | 5 r/min | 5 r/min |
| Feel times | 10 times/min | 10 times/min |
| counter | 0~9999 | 0~9999 |
| Material | 19 mm nominal thick blockboard | 5 mm steel and hard wooden plate |
| Height | 650 mm | 1070 mm |
| Dimension | W*D*H=630mm x 600mm x 1250mm | W*D*H=630mm x 600mm x 1450mm |
| Chute Length | 275mm | 275mm |
| Conforms to standard | BS1363.1 UL60730 | IEC60312 |
350mm Electrical Appliance Tester
Inquiry Cart
0