

Add to Cart
20g/L RS485 Suspended Solids Sensor With Brush For Wastewater Treatment Plant
Sludge Concentration Sensor MLSS30 is a device for measuring sludge concentration in water or wastewater. They play an important role in wastewater treatment, environmental monitoring, industrial process control and other fields. Below are some functions, applications and technical features of the sludge concentration sensor:
Function:
Measurement Accuracy: Sludge concentration sensors need to have high accuracy to ensure
accurate and reliable measurement results to support correct
decision-making and treatment processes.
Real-time monitoring: The sensor can provide real-time sludge concentration data to help
operators understand the changes of sludge in the water body in
time, so as to make corresponding adjustments.
Automatic control: The sludge concentration sensor with RS485 can be integrated with
the automatic control system to realize real-time monitoring and
automatic adjustment of the treatment process, thereby improving
the treatment efficiency and effect.
Alarm function: The sensor can be used together with the controller to set the
alarm threshold. Once the sludge concentration exceeds the preset
range, an alarm will be triggered so that measures can be taken in
time.
Data recording and analysis: Sludge concentration controllers are
usually capable of recording historical data
Specification:
Model | MLSS300 (no wiper) MLSS301 (with wiper) | MLSS310 (no wiper) MLSS311 (with wiper) | MLSS320 (no wiper) MLSS321 (with wiper) |
Measuring Principle | Infrared scattered light method | ||
Measuring Range | 0.01-20g/L | 0.01-45g/L | 0.01-120g/L |
Accuracy | Less than 5% of the measured value | ||
Resolution | 0.01g/L | ||
Response Time | T90<60s | ||
Calibration | Factor calibration, multi-point calibration | ||
Communication | RS485, Modbus-RTU | ||
Work Pressure | ≤4bar | ||
Work Temp | 0~50℃ (does not freeze) | ||
Storage Temp | -10~60℃ | ||
Flow Rate | Not dependent | ||
Power Supply | 12V DC | ||
Dimensions | Diameter 65mm * Length 270mm | ||
Installation | Horizontal installation, special 90° installation accessories | ||
Material | Body: PVC(Standard)SUS316L/ T i(option) / POM | ||
Protection Grade | IP68 | ||
Cable | Standard 10 meters | ||
Weight | 800g | ||
Power Consumption | 1.5W |
Please click the user manual of Suspended Solids sensor here:
Brief introduction:
Aplication:
◇Soil remediation and pollution control
◇Bioenergy and Resource Recovery
◇Industrial Waste Treatment
◇Architecture and Construction
◇Academic Research
◇Wastewater treatment plant
◇ Waterworks
◇ Surface water
◇Semiconductor
◇Environmental water treatment
◇ Paper industry
◇ Mining
◇ Metallurgical Electronics