

Add to Cart
Main features
Excellent microprocessor control optimizes reliability
Wide range of power input
Double boost and buck AVR for voltage stabilization
Auto restart while AC is recovering
Off mode charging function
Simulated sine wave
Cold start function
Compact size and ergonomic design: it can be placed on a desk top
or other convenient location
Perfect protection for overload ,short circuit ,over-voltage
,low-voltage and over-heating etc.
Display: LCD display providing status, load and battery information
Intelligent battery management
MODEL | LIC1000 |
Capacity | 1000VA/600W |
INPUT | |
Voltage | 110/120 VAC or 220/230/240 VAC |
Voltage Range | 81-145 VAC or 140-300 VAC |
Frequency Range | 60/50Hz (Auto sensing) |
OUTPUT | |
Voltage | 110/120 VAC or 220/230/240 VAC |
AC Voltage Regulation(Bat Mode) | ±10% |
Frequency Range(Bat Mode) | 60Hz or 50Hz ± 1Hz |
Transfer Time | Typical 2-6ms |
Waveform(Bat Mode) | Simulated sine wave |
BATTERY | |
Battery Type & Number | 12V 7Ah*2 |
Charging Ability | 4-6 hours recover to 90% capacity |
PROTECTION | |
Full Protection | Short circuit,Overload, Battery discharge and overcharge,Surge protection |
INDICATIONS | |
AC Mode | Green lighting |
Battery Mode | Yellow flashing |
Fault | Red lighting |
Battery Mode | Sounding every 10 seconds |
Low Battery | Sounding every second |
Overload | Sounding every 0.5 seconds |
Battery Replacement Alarm | Sounding every 2 seconds |
Fault | Continuously sounding |
Dimension | 370*135*165mm |
Net Weight | 9KG |
ENVIRONMENT | |
Humidity | 0-90% Relative Humidity 0-40°C (Non-condensing) |
Noise Level | Less than 40dB |
COMMUNICATIONS | |
USB/RS232/SNMP(optoions) | Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8 Linux Unix and MAC |