Product Details
Best Pen Touch Optical Portable USB Interactive Whiteboard
smartboards for classroom
Pen Touch Interactive Whiteboard (3D TOUCH)
Product introduction
3D5 is our newest Generation Portable Interactive Whiteboard, which
is more stable, easy to install and use, response quickly and
latency less. 3D Touch 5 use optical technology,it can convert any
flat surface into interactive whiteboard.Advantage over traditional
whiteboard:auto calibration;write on any flat surface,(such as
wall,blackboard,LCD panel);active size from 40-150inch;low cost.
Product installation
1. High stability: Use the advanced algorithm to avoid the affect
of the light.
2. Support three ways calibration(Picture A).5s auto
calibration(calibrate dot is up to 289units),Semi auto calibration,Manual calibration.
Picture A Picture B3.Support 10 points touch.Ten people write together without any
interference. (Need equip with more pens) (as Picture B)
4.Support size from: 40-150 inch.
5.Portable, high integration and easy to install: Total weight is
only around 500g. The installation is very easy, just install the
sensor mounted to projector or ceiling, No skill needed.
6.Sensor with the flash chips: Don’t need to calibration if you
change the computer with the same resolution ratio. It save time,
and make the use easier.
7.Automatic-control filter.When calibrating,the filter keep
open;when finished,the filter close.
8.Turn common board or wall to touch board. It can turn any flat
surface (whiteboard, wall and so on) into ir pen touchable.
Technical ParameterPortable Pen touch interactive whiteboard |
Calibration | Automatic(5s) / Manual (25/36 points) |
Technology | Optical Technology |
Resolution | 4096*4096 |
Multi-writing | Max 10 people can write at the same time |
Latency | <30ms |
Filter | Software auto-control, enhance stability. |
Minimum Active Size | 40-inch |
Max Active Size | 150-inch |
Positional Accuracy | ±1 Pixel |
Aspect Ratio | 4:3;16:9;16:10 |
Projector ratio | Ultra short throw : 0.28, 3D4ENGLB4, installation
distance:0.40~0.55M; Short throw:0.34,3D4ENGLA4, installation
distance:0.54~1.1M; Long throw:1.34 , 3D4ENGLE4, installation
distance:2.15~3.2M. |
Power Consumption | 100mw |
Signal refresh rate | 120fps. |
Connect | The sensor and computer are connected by USB Cable |
Weight | 0.25kg |
OS Requirement | Windows XP, Vista, Windows 7,windows 8,Windows10,Android |
Software | Calibration software(driver) and GLboard(education software) |
Certification | CE, FCC |
Warranty | 3-year |
Package | 1. Sensor 2..Mounts 3.USB cable (12m*1) 4.Infrared pen 5.Manual |
Comparison TableTechnology | Auto Calibrate | Multi Writing | Calibration Accuracy | Portable | Response Speed | Variable Size | Vulnerable | Cost |
Electromagnetic Induction | No | Few | Better | No | Slow | No | Yes | High |
Infrared | No | No | Better | No | Quicker | No | Yes | High |
Pressure | No | Few | Good | No | Quick | No | Yes | Higher |
Ultrasound | No | No | Good | No | Quick | No | No | Low |
Optical | Yes | Yes | Better | Yes(250g) | Quickest | 40-150inch | No | Low
|
Introduce of our company:
Company Profile
ABOUT US
Founded in 2007, Shenzhen iBoard Technology Co., Ltd. is located in
Shenzhen, Guangdong Province, China. It has 14 years of experience
in the education Informationization industry. Now we’ve become into
a smart education solution provider and operation service provider,
specializing in R&D, production and sales of smart education
cloud platform, interactive teaching software in classroom,
interactive whiteboard software and infrared touch frame,
interactive whiteboard, laser projector, all-in-one multimedia
device, interactive LED display, advertising display and digital
signage etc. In addition, we’re also a national high-tech
enterprise and key software enterprise of science, industry and
trade.
iBoard has established a complete ISO9001 quality management
system, ISO14001 environmental management system and OHSAS18001
occupational health and safety management system. The products are
approved by 3C, CE, FCC, RoHS and many other product certificates.
We have rich experience in OEM/ODM service for overseas customers.
And our products are sold to more than 80 countries around the
world. Our goal is to become the world's number one interactive
device and smart campus solution provider.
With the long-term stable development of the company and the
strategic deployment needs in 2019, we has once again expanded the
scale and moved the Dongguan branch to Gongming district of
Shenzhen. The factory area has been upgraded from 10,000 ㎡ to
23,000 ㎡; The R&D center, purchasing center and after-sales
center have settled in together, cooperating with the production
lines to improve production efficiency and focus on providing
customers with better products and services. You’re welcome to
visit our company and we’re looking forward to working with you.



