DN150 SCH40 A234 WP11 Steel Pipe Cross Used At Main Pipe Branch

Stainless steel welding Cross DN150 SCH40 A234 WP11 Used at main pipe branch

carbon steel four-way has equal diameter and different diameter, the end of equal diameter four-way pipe is the same size, the diameter of four-way pipe is the same, and the size of branch pipe is smaller than that of supervisor. Stainless steel four-way is a kind of pipe fittings used in pipe branches. For the use of seamless pipe to make four-way, there are two kinds of processes: hydraulic bulging and hot pressing. Hydraulic expansion of a. hydraulic expansion of four-way is a forming process of expanding branch pipe through axial compensation of metal material. The process is to use a special hydraulic press to inject liquid into the tube billet equal to the four-way diameter, and to squeeze the tube billet synchronously through the two horizontal side cylinders of the hydraulic press. The liquid in the tube billet increases with the volume of the tube billet. The hydraulic expansion process of four-way can be formed at one time, and the production efficiency is high, and the wall thickness of four-way supervisor and shoulder is increased. Because of the large tonnage of the hydraulic expansion process of seamless four-way, it is mainly used in the manufacture of standard wall thickness four-way less than DN400. The suitable forming materials are low carbon steel, low alloy steel, stainless steel, including some non-ferrous metal materials, such as copper, aluminum, titanium and so on. b. hot-pressing forming four-way hot-pressing forming is to flatten the tube billet larger than four-way diameter to the size of four-way diameter and open a hole in the drawing branch pipe. Under the action of pressure, the tube billet is compressed radially. In the process of radial compression, the metal flows to the branch pipe and forms the branch pipe under the drawing of the punching die. The whole process is formed by the radial compression of the tube billet and the tensile process of the branch pipe. Different from hydraulic expansion, the metal of hot pressing four-way branch pipe is compensated by radial motion of pipe billet, so it is also called radial compensation process. Because the four-way is pressed after heating, the tonnage of the equipment needed for material forming is reduced. The hot-pressed four-way has a wide adaptability to the material, which is suitable for low carbon steel, alloy steel, stainless steel, especially the four-way with large diameter and thick pipe wall, which is usually used in this forming process.
Standards
According to the manufacturing standard can be divided into national standard, electrical standard, water standard, American standard, German standard, Japanese standard, Russian standard, such as GB/T12459,GB/T13401, standard
ASME B16.9,SH3408,SH3409,HG/T21635,DL/T 695,SY/T 0510,DIN 2615

The cross is a kind of pipe fitting used at the branch of the pipe.

The materials include alloy steel cross, carbon steel cross and stainless steel cross.

The cross can be divided into equal diameter and reducing diameter. The nozzle ends of equal diameter four-way pipes are the same size; the main nozzle sizes of reducing four-way pipes are the same, and the nozzle sizes of branch pipes are smaller than that of main pipes.

Material & Grades of Pipe cross

Stainless steel butt welding cross:

ASTM A403 WP316/316L, ASTM A182 F316L,304L

Carbon Steel butt Welding cross:

ASTM A234, ASME SA234 WPB , WPhY52, WPH 60, WPHY65 & WPHY 70.

Low Temperature Carbon Steel Butt welding tee:ASTM A420 WPL6

Alloy Steel Butt welding cross:

ASTM/ASME A/SA 234 WP5, WP9, WP11, WP12, WP22, WP91

carbon steel four-way has equal diameter and different diameter, the end of equal diameter four-way pipe is the same size, the diameter of four-way pipe is the same, and the size of branch pipe is smaller than that of supervisor. Stainless steel four-way is a kind of pipe fittings used in pipe branches. For the use of seamless pipe to make four-way, there are two kinds of processes: hydraulic bulging and hot pressing. Hydraulic expansion of a. hydraulic expansion of four-way is a forming process of expanding branch pipe through axial compensation of metal material. The process is to use a special hydraulic press to inject liquid into the tube billet equal to the four-way diameter, and to squeeze the tube billet synchronously through the two horizontal side cylinders of the hydraulic press. The liquid in the tube billet increases with the volume of the tube billet. The hydraulic expansion process of four-way can be formed at one time, and the production efficiency is high, and the wall thickness of four-way supervisor and shoulder is increased. Because of the large tonnage of the hydraulic expansion process of seamless four-way, it is mainly used in the manufacture of standard wall thickness four-way less than DN400. The suitable forming materials are low carbon steel, low alloy steel, stainless steel, including some non-ferrous metal materials, such as copper, aluminum, titanium and so on. b. hot-pressing forming four-way hot-pressing forming is to flatten the tube billet larger than four-way diameter to the size of four-way diameter and open a hole in the drawing branch pipe. Under the action of pressure, the tube billet is compressed radially. In the process of radial compression, the metal flows to the branch pipe and forms the branch pipe under the drawing of the punching die. The whole process is formed by the radial compression of the tube billet and the tensile process of the branch pipe. Different from hydraulic expansion, the metal of hot pressing four-way branch pipe is compensated by radial motion of pipe billet, so it is also called radial compensation process. Because the four-way is pressed after heating, the tonnage of the equipment needed for material forming is reduced. The hot-pressed four-way has a wide adaptability to the material, which is suitable for low carbon steel, alloy steel, stainless steel, especially the four-way with large diameter and thick pipe wall, which is usually used in this forming process.
Standards
According to the manufacturing standard can be divided into national standard, electrical standard, water standard, American standard, German standard, Japanese standard, Russian standard, such as GB/T12459,GB/T13401, standard
ASME B16.9,SH3408,SH3409,HG/T21635,DL/T 695,SY/T 0510,DIN 2615

The cross is a kind of pipe fitting used at the branch of the pipe.

The materials include alloy steel cross, carbon steel cross and stainless steel cross.

The cross can be divided into equal diameter and reducing diameter. The nozzle ends of equal diameter four-way pipes are the same size; the main nozzle sizes of reducing four-way pipes are the same, and the nozzle sizes of branch pipes are smaller than that of main pipes.

Material & Grades of Pipe cross

Stainless steel butt welding cross:

ASTM A403 WP316/316L, ASTM A182 F316L,304L

Carbon Steel butt Welding cross:

ASTM A234, ASME SA234 WPB , WPhY52, WPH 60, WPHY65 & WPHY 70.

Low Temperature Carbon Steel Butt welding tee:ASTM A420 WPL6

Alloy Steel Butt welding cross:

ASTM/ASME A/SA 234 WP5, WP9, WP11, WP12, WP22, WP91

HEBEI PENGXIN PIPELINE EQUIPMENT GROUP CO.,LTD.. was established in the early 1990s, is located in China elbow pipe capital "mengcun" golden hinterland New hope. Here north of Beijing and Tianjin, south of Jinan, east Huanghua port, excellent location, ease of access and the unique economic environment for the development of the company provides unlimited opportunities.
After nearly two decades of hard business, Hebei Peng Xin Pipeline Group Ltd. has now developed into a set of tube production, steel logistics, sales and export as one of the group of companies. Which owns Hebei Peng Xin Pipe Group Co., Ltd. Hebei Peng Xin Xin Ding Pipe Group Co., Ltd., Hebei Peng Xin Hua Tuo High Pressure Pipe Group Co., Ltd., Hebei Xin Peng Bo Tao Group Pipe Manufacturing Co., four large-scale companies.

Group covers an area 66,600 square meters, the total assets of 318 million yuan, registered capital of 1.0188 billion yuan, annual production of 30,000 tons pipe fittings, pipe throughput of nearly ten million tons. The company currently employs 628 people, including engineers, economists, accountants 128 people. Widespread branches and offices in major cities in the country, while the company also has independent export right, the products are exported to Europe, America, Southeast Asia, Russia and other countries and regions.

Laid a strong foundation for the development Peng Xin Group, the Group has 5,000 tons of press, large heat treatment furnace, a large IF pushing machine, a large bending machine, beveling machine, sawing machine, lathe, drill press, tee cold extrusion machine, plywood hammer, vertical lathe, large sandblasting machines and other related facilities 316 sets. Has advanced physical and chemical metallurgical, nondestructive testing, material testing equipment more than 40 sets. And has the world's most advanced metallic materials direct reading spectrometer, employing all the national and provincial authorities to obtain recognized qualifications, and in strict accordance with the company's quality assurance system for production traceability. After years of hard work group company has passed the ISO9001 international quality system certification, ISO14001 environmental management system certification, OHSAS18001 occupational health and safety management system certification most authoritative industry certification.

Quality determines survival, the details determine success or failure. Customer satisfaction for the purpose of quality concept, created Peng Xin Group's quality and strength.
Peng Xin Group uphold integrity first, create business opportunities business philosophy. Depending on the product quality and Honor for the group life, years of spot check inspection Peng Xin Group's products are always 100% qualified.
Our main products are electricity, chemical equipment, carbon steel, alloy steel, stainless steel, X-class series and a variety of materials elbows, bends, reducers, tees, crosses, head, flange, bearing plug-in, hangers and other pipeline products. Company carbon steel, alloy steel, stainless steel and other wall thickness, size pipe.

Peng Xin Group is the large seamless steel pipe, straight seam steel pipe, spiral steel pipe, steel pipe logistics base, annual inventory of 38,000 tons or more. Operating Chengdu Steel, Shanghai Baosteel, Tianjin big seamless, Jiangsu Chengde, Longchuan steel mills, Shandong giant, Steel, Anshan Iron and Steel and the United States, Japan, Germany, Italy and other countries products. And to Panzhihua, Chengdu Seamless Steel Tube Plant, Hengyang Valin Steel Tube Co., Ltd., Jiangsu Chengde Steel Tube Co., Ltd. distributor in North China. Simultaneously and professional production 300000, 600000, 1000000 subcritical, supercritical, ultra-supercritical, thermoelectric four pipes and pipe factory piping.

Group products are mainly used in petroleum, chemical, natural gas, nuclear power, thermal power, metallurgy, heat pipe, shipbuilding, construction and other industries. With Datang, Huaneng, Huadian, Guodian, China National Petroleum Corporation, China National Offshore Oil Corporation, rings technology into the Engineering Company, Saiding engineering company, China Lu engineering company, Sinochem Second Construction, Chongqing Chemical Medical Group, Xiamen Xianglu Group, Xinjiang Guinness company, chemical and Thailand, sky, Lu Tien-oriented, Plum MSG, Ershisanye, Shandong Sea Chemical Yongxin petrochemical, large stone technology, Chen Hung chemicals, Wanhua Group etc. has always been a good cooperation.

Peng Xin is its distinctive brand positioning, three-dimensional marketing strategies in the industry leading the way.
Group Company has obtained API, CE, ASME and other international and national certification issued by the General Administration of Quality Supervision, Inspection and China special equipment manufacturing license, the State Power Corporation power plant parts supply network member factory, Hebei Boiler and Pressure Vessel Supervision, Inspection and Supervision, Inspection Unit , China National Petroleum Corporation supplies network member unit of China National Offshore Oil Corporation qualified suppliers, Datang International Network Supplier Membership materials, China Huadian Corporation tendering and procurement network provider group-level member of "China metal materials distribution industry leader ", Hebei Province, taxes hero and many other honors
Challenges facing the industry, Peng Xin Group, adhering to the essence Xeon technology, the service flawless reputation to really sincere business philosophy, and constantly introduce new technologies, develop new projects and seek new areas. In the future, Peng Xin people are to unity, progressive attitude, being in the forefront of pipeline equipment industry to do the industry leader position leading international brand.