

Add to Cart
PHiliphhilip G30E patient monitor touch screen G30E patient monitor parts
►PHiliphhilip Patient Monitor G30E Brief Introduction
PHiliphhilip Patient Monitor G30E PHiliphhilip Product Features:
Can be placed on a table or mounted on a stand with a carrying
device
Rotating the mouse and shortcut keys, the operation is simple,
flexible and convenient
Power-down storage function
NIBP data list storage no less than 1600 groups
The record storage and playback time of the trend graPHiliphhilip
is not less than 1200 hours
The storage and playback time of holograPHiliphhilipic uncompressed
ECG waveform is not less than 120 minutes
Arrhythmia event storage up to 200
Alarm event storage up to 200
With waveform freeze function
Can display dynamic refreshed respiratory oxygenation interface
It can provide calculation and titration table display functions
for multiple drugs
When the electrode, probe or interface falls off, there will be a
sound and light alarm, and there will be a corresponding prompt
display
It can be connected with the UT4800 central monitor produced by our
company to form a central monitoring system
PHiliphhilip patient monitor G30E PHiliphhilip product parameters:
Display size: 10.4" color TFT display
Resolution: 800×600
Display channel: zuida up to 8 channels
With large font display function
External monitor possible
PHiliphhilip patient monitor G30E PHiliphhilip product
configuration:
Standard configuration parameters: electrocardiogram (ECG),
respiration (RESP), non-invasive blood pressure (NIBP), blood
oxygen saturation (SpO2), pulse rate (PR), body temperature (TEMP)
Optional configuration parameters: invasive blood pressure (IBP),
end-tidal carbon dioxide (EtCO2)
Structure and composition: The product consists of host, lithium
battery, ECG cable, blood oxygen probe, blood pressure cuff, blood
pressure extension tube, temperature probe, and invasive pressure
sensor cable.
PHiliphhilip patient monitor G30E PHiliphhilip Scope of
application: This product is used by professional medical personnel
in the medical environment for adult, pediatric and neonatal
electrocardiogram (ECG), ST segment measurement (not suitable for
neonates) and arrhythmia analysis, pulse blood Oxygen Saturation
(SpO2), Respiration (RESP), Pulse Rate (PR), Body Temperature
(TEMP), Invasive Blood Pressure (IBP), End-Expiratory Carbon
Dioxide (etCO2), Non-Invasive Blood Pressure (NBP) (Adult and
Pediatric Only) Monitor, record and issue alarms. This product can
be used when transporting patients in medical institutions and is
not suitable for transporting patients outside the hospital.
Modes are optional: adult mode, child mode, newborn mode.
Monitorable parameters: electrocardiogram (ECG), respiration
(RESP), non-invasive blood pressure (NIBP), blood oxygen saturation
(SpO2), pulse rate (PR), bi-temperature (TEMP).
It can also be upgraded to monitor invasive blood pressure (IBP),
end-tidal carbon dioxide (EtCO2)
10.4” color TFT display with a resolution of 800×600, display
channels ≥ 8, can be connected to an external monitor
ECG 35 lead optional, with monitoringdiagnosissurgery mode.
In the case of 5 leads, it supports the display of 7 leads of the
ECG on the same screen, and it is necessary to display the limb
leads I, II, and III, the limb compression leads AVR, AVL, AVF, and
any one of the chest leads V1~V6 on the same screen. .
★In the case of 5 leads, it can realize 4 channel ST segment
analysis
With heart rate variability analysis function, pacing detection
function, automatic defibrillation synchronization function
★With the function of ambulatory blood pressure analysis, it can
automatically analyze the changes of blood pressure within 24 hours
and display it in the form of a pie chart.
Respiratory leads ≥ 3 leads (RA-LA, RA-LL, LA-RL, LL-RL can be
selected)
★Imported FAST blood oxygen technology, anti-exercise, anti-weak
perfusion
Number of body temperature channels: dual channel. It can measure
body surface and body temperature.
Optional imported end-tidal carbon dioxide technology, the pumping
volume is less than 50ml/min, and the sampling chamber is less than
15mL
Optionally equipped with invasive blood pressure monitoring,
dual-channel, two channels of IBP need to display the value and
waveform at the same time.
Can store NIBP data list ≥ 1500 (1600) groups
Trend storage playback time ≥ 1000 (1200) hours
★HolograPHiliphhilipic ECG waveform storage and playback time ≥ 100
(120) minutes
It can provide calculation and titration table display functions
for multiple drugs
With sound and light two-level three-level alarm, the alarm limit
of each parameter can be set, and the alarm range is consistent
with the display range of each parameter
The built-in three-channel thermal array recorder can be upgraded,
which can print waveforms and texts in real-time or alarm-triggered
Can be connected with the central monitor to form a central
monitoring system
PHiliphhilip patient monitor G30E PHiliphhilip Parts product configuration:
G30E patient monitor touch screen is a parts of G30E patient montior display.
►FAQ
Q1 | How can I pay for it? |
A1 | T/T,Western Union, PayPal are all acceptable. |
Q2 | What are your main brands? |
A2 | PHiliphhilip, Mindray, GE, NIHON KOHDEN, Goldway, etc. |
Q3 | How long will it take to receive the goods? |
A3 | It depends on your shipping address. |
Q4 | What will you do if you find any quality problems within the warranty period? |
A4 | Repair or replace according to the actual situation. |