Masima Rainbow® Patient Cable Rainbow RC-12 For Mindray Datascope DATASCOPE DPM6 DPM7 SPO2 Adapter Cable

Brand Name:Masima
Model Number:Rainbow RC-12
Minimum Order Quantity:1
Delivery Time:3-5 working days
Payment Terms:T/T, Western Union,PayPal
Product name:Masima Patient Cable
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou Guangdong China
Address: TianHe District,GuangZhou,GuangDong
Supplier`s last login times: within 33 hours
Product Details Company Profile
Product Details

Masima Rainbow® Patient Cable Rainbow RC-12 for Mindray Datascope DATASCOPE DPM6 DPM7 SPO2 Adapter Cable


►Brief Introduction

Rainbow® RC-12 Patient Cable, 12 ft (3.7m) For use with rainbow and M-LNCS sensors.
It’s 8 pins, purple connector.
This Spo2 Cable is measure SpO2 on a healthy person’s finger and a Pleth wave and PR value are displayed. The displayed SpO2 value is within 95% and 100%.
The SpO2 value displayed on the monitor screen is the average of data collected within a specific time. The shorter the averaging time is, the quicker the patient monitor responds to changes in the patient’s oxygen saturation level. Contrarily, the longer the averaging time is, the slower the patient monitor responds to changes in the patient’s oxygen saturation level, but the measurement accuracy will be improved. For critically ill patients, selecting shorter averaging time will help understanding the patient’s state.


Setting SpO2 Sensitivity

For Masima SpO2 module, you can set [Sensitivity] to [Normal] or [Maximum] in the [SpO2 Setup] menu. When the [Sensitivity] is set to [Maximum], the patient monitor is more sensitive to minor signals. When monitoring critically ill patients whose pulsations are very weak, it is strongly recommended that the sensitivity is set to [Maximum]. When monitoring neonatal or non-critically ill patients who tend to move a lot, noise or invalid signals may be caused. In this case, it is recommended that the sensitivity is set to [Normal] so that the interference caused by motion can be filtered and therefore the measurement stability can be ensured.


SpO2 Specifications

Alarm limitRange (%)Step (%)
Desat0 to (high limit – 1)
20 to (high limit – 1)
1

Masima SpO2 Module

Measurement range1 to 100%
Resolution1%
Refreshing rate1 s
SpO2 averaging time2-4 s, 4-6 s, 8 s, 10 s, 12 s, 14 s, 16 s
Low perfusion SpO2 accuracy±2%
Low perfusion conditionsPulse amplitude: >0.02%
Light penetration: >5%
Accuracy70 to 100%: ±2% (measured without motion in adult/pediatric mode)
70 to 100%: ±3% (measured without motion in neonate mode)
70 to 100%: ±3% (measured with motion)
0% to 69%: Not specified.

Measurement Limitations

If you doubt the measured SpO2, check patient vital signs first. Then check the patient monitor and SpO2 sensor. The following factors may influence the accuracy of measurement:

  • Ambient light
  • PHiliphhilipysical movement (patient and imposed motion)
  • Diagnostic testing
  • Low perfusion
  • Electromagnetic interference, such as MRI environment
  • Electrosurgical units
  • Dysfunctional haemoglobin, such as carboxyhemoglobin (COHb)and methemoglobin (MetHb)
  • Presence of certain dyes, such as methylene and indigo carmine
  • Inappropriate positioning of the SpO2 sensor, or use of incorrect SpO2
  • Drop of arterial blood flow to immeaurable level caused by shock, anemia, low temperature or vasoconstrictor.


If you have any questions about Masima Rainbow® Patient Cable Rainbow RC-12 , please feel free to contact us at any time, we are glad to answer them. Looking forward to receiving your early inquiry. Thanks for Your Cooperation.


China Masima Rainbow® Patient Cable Rainbow RC-12 For Mindray Datascope DATASCOPE DPM6 DPM7 SPO2 Adapter Cable supplier

Masima Rainbow® Patient Cable Rainbow RC-12 For Mindray Datascope DATASCOPE DPM6 DPM7 SPO2 Adapter Cable

Inquiry Cart 0