PHiliph MP40 Patient Monitor Refurbished Touch Screen E131992 J09L078118

PHiliphh MP40 Patient Monitor Refurbished Touch Screen E131992 J09L078118

Touchscreen Calibration

To access the touchscreen calibration screen:

1 Enter service mode

2 Select Main Setup

3 Select Hardware

4 Select Touch Calibration

Perform the calibration procedure without turning off the monitor. If the screen turns off after touching the first point, the touch screen will be disabled until touch calibration is performed again.

If you calibrate the touchscreen incorrectly by selecting the wrong location, you will need to re-enter calibration mode using a different input device. If you have a support device, you can choose to reset touch calibration to the default. This creates an approximate calibration that allows you to return to the calibration menu from the touch screen.

Integrated Touch Display not functioning

1.Touch Screen not functioning

2.Invalid touch position

Disable/enable touch actions

There are two ways to disable/enable the touchscreen functionality:

1. Press and hold the home button to temporarily disable the touchscreen functionality. A padlock symbol appears on the key. Press and hold the home button again to reactivate the touchscreen function.

2. To permanently disable the touchscreen:

A. Enter service mode.

B. Select main settings

C. Select User Interface

D. Change Enable Touch to no.

Set Enable Touchscreen to Yes to re-enable touchscreen functionality

Removing the Touchscreen

1 Remove the front and back of the monitor as above.

2 Remove the touch controller board, press the connector safety latch, and disconnect the touch sensor cable.

Note Both the touch screen and touch controller board must be replaced for the monitor to function properly.

Assembly Note: First connect the touch sensor cable to the touch controller board, then reinstall the touchpad.

3. Remove the two screws securing the power button and LED board and remove the board. Plates and screws are part of the flex panel adapter cable.

Note The screws that secure this plate are self-tapping screws. When reinstalling, first turn it in the opposite direction.

4. Remove the 8 screws, loosen the 2 clips on the monitor frame and carefully remove the monitor assembly.

NOTE: It is recommended that this procedure be performed in a dust-free environment. The touchscreen display assembly can be difficult to remove due to the gaskets (tape) holding the two together.

5 Remove the touch screen (sensor) from the frame.

Note This operation can be difficult due to the seams (bands).

Assembly Note: When viewing the touch screen from the rear, the touch sensor cable must be facing to the right when placing the touch screen back into the monitor housing.

Note Both the touch screen and touch controller board must be replaced for the monitor to function properly.

If you're interested in PHiliphh MP40 Patient Monitor Refurbished Touch Screen E131992 J09L078118 ,feel free to contact us .Thank you .

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.