

Add to Cart
UT-2466 Nihon Kohden CardiofaxS ECG-2250 ECG Machine Mainboard SMT-5 Including Display Booard USB NETWORK Connector
Nihon Kohden CardiofaxS ECG-2250 ECG Machine Mainboard UT-2466 SMT-5 94V-0 Including Display Booard USB NETWORK Connector
The motherboard of the Nihon Kohden Cardiofax S ECG-2250 electrocardiograph is the core component that controls and coordinates the operation of the machine. It houses the microprocessor, memory, and other electronic components needed for the machine to function. The main board receives signals from electrodes placed on the patient, processes the data, and sends the results to a monitor or printer. It also interfaces with other subsystems of the machine, such as power, user interface, and communication ports. The motherboard plays a vital role in ensuring accurate and reliable recording of the patient's ECG.
Product Name | Nihon Kohden cardiofaxS ECG-2250 ECG machine mainboard UT-2466 SMT-5 94V-0 including display booard USB NETWORK connector |
Brand | Nihon Kohden |
Part No | UT-2466 |
Application | Nihon Kohden cardiofaxS ECG-2250 ECG machine |
MOQ | One piece |
Warranty | 90 days |
The sole function of an electrocardiograph, a high-precision electronic medical device, is to accurately detect, amplify, and transmit weak human electrophysiological signals to a display screen. From this, it is easy to imagine that the accuracy of the detection signal in the front stage of the electrocardiograph directly determines the accuracy of the rear stage and the overall output, and the final output result may be wrong by tens of times. or it can be more. The following five points should be considered by healthcare professionals regarding the use and maintenance of electrocardiograph electrodes and leads.
① After each use of the electrode, the conductive paste or salt water on the surface should be wiped off, so as to reduce the corrosion of the electrode as much as possible;
②If you find oxidation or rust spots on the surface of the silver-plated electrode, just use a flannel cloth to wipe it, and never use sandpaper to polish it;
③ If it is found that the electrode is deformed, the silver skin is peeled off, or part of the copper is exposed due to abrasion, then the electrode can no longer be used;
④ Do not use the new electrode replaced by the ECG machine immediately, but soak it in sodium chloride solution for several hours before use;
⑤ When pulling out the plugs of the lead wires after use, the plugs must be pulled out by hand, and the wires must not be pulled out, otherwise the wires will be easily damaged or even broken..
Thank you so much for your attention .If you're interested in UT-2466 Nihon Kohden CardiofaxS ECG-2250 ECG Machine Mainboard SMT-5 Including Display Booard USB NETWORK Connector ,feel free to contact me .Thank you .