PHiliph MRX M3535A Defibrillator Louder Speaker And Microphone Assembly

PHiliphh MRX M3535A Defibrillator Louder speaker and Microphone Assembly

► Audio Problems

► Speaker and Microphone Assembly

The speaker and microphone assembly can be removed without removing any other assembly from the front enclosure.

► Preparation

1. Open the enclosure and remove it.

2. Secure the front enclosure

Place the front cover on the work surface with the display facing down and the printer in the lower left corner.

► Removal

1. Disconnect the speaker and microphone from the PCA. Disconnect the four-wire connector by pulling it upward (1).

2. Remove the screw. Loosen and remove the T-10 screw securing the plastic cover and bracket to the chassis.

3. Remove the shield and bracket. Lift the shield and place it upward (2).

4. Note the position of each speaker, microphone, and cables. The speaker is diagonally forward of the speaker bracket. The microphone fits into a well-formed recess in the enclosure.

5. Remove the speaker and microphone. No one has anything to do with this case; just take them both.

► Replacement

1. Install the speakers and microphone.

To. Place the speaker connectors on the bottom. There are two ribs on the bottom of the speaker stand; the speaker sits on top of the ribs.

B. Place the microphone in the slot. Align the microphone cable with the notch in the slot.

2. Attach the protector and bracket. Make sure the red-black 4-wire harness and the white 2-wire harness go under the bracket.

3. Replace and tighten the screws.

4. Connect the speaker/microphone assembly. Connect the four-wire connector to the processor PCA.

5. Close the case.

Thank you so much for your attention .If you're interested in PHiliphh MRX M3535A Defibrillator Louder speaker and Microphone Assembly ,feel freet to contact us .Thank you .

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.