Add to Cart
High Configuration MCU Calculation Intelligent Sound Level Meter 35dB~135dB
Meter description
1. Windscreen microphone cover
2. LCD Display
3. Hold button
4. Power on/off button
5. MAX/MIN
6. Fast/ Slow selection key
7. Nameplate
8. Battery compartment
LCD display description
1. Data hold Icon
2. Auto power off Icon
3. Temperature readings
4. Sound level readings
5. Fast/Slow Icon
6. Hi/Lo Icon
7. Frequency weighting Icon
8.T emperature unit Icon
9. Low battery Icon
10. MAX/MIN Icon
Application
This unit adopts condenser microphone as the sensor, high
configuration MCU calculation, high accuracy, fast response. This
Sound Level Meter is designed to meet the measurement requirements
of safety Engineers, Health, Industrial safety offices and sound
quality control in various environments like factory, school,
construction, etc.
Specification
Applied Standard | IEC61672-1 CLASS2 |
Measuring level range | 35dB~135dB |
Dynamic range | 50dB |
Frequency range | 31.5Hz~8KHz |
Accuracy | ±2.0dB |
Frequency weighting | A frequency weighting |
Time weighting | FAST:125ms/ SLOW: 1s |
Microphone | 1/2 inch electrets condenser microphone |
High/low reading indication | ﹥100dB,LCD displays“Hi” |
﹤100dB,LCD displays“LO” | |
Temperature range | -20℃~70℃/-4℉~158℉ |
Temperature accuracy | ±1.5℃/2.7℉ |
Resolution | 0.1 |
Data update | 300ms |
Battery life | at least 60 hours |
Enable/Disable Auto power off | The meter shuts off automatically after 15 minutes inactivity under auto power off mode, disable auto power off is available |
Battery | 3*1.5V “AAA” batteries |
Operating conditions | -20℃~60℃/-4℉~140℉,10RH%~90 RH% |
Storage conditions | -20℃~60℃/-4℉~140℉,10 RH%~75 RH% |
Dimensions | 144*56*30.5mm |
Weight | 73g |
Notes
1) This meter has already been calibrated before delivery. Do not
revise the calibration parameters without professional personnel
and device.
【Note】All products are well calibrated before delivery. Recommended
recalibration cycle: 1 year..
2) Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
3) Wipe the unit with a dry soft cloth periodically. Do not use
abrasives or solvents on this instrument.
4) Remove the battery when the meter is to be stored for long
periods of time to avoid battery leakage.
5) when the battery is low,LCD display,A new battery is needed.
6) Do not store or operate the meter in high temperature or
humidity.
7) Wind blowing across the microphone increases the noise
measurement. Use the supplied windscreen to cover the microphone
when appliance.
8) Keep microphone dry and avoid severe vibration.
Accessories:
1. User's manual
2. 3*1.5V AAA Battery
3. Windscreen