Liner Type 800 Pcs/Hour PCB V Cut Machine With Multi Continuous Cutting Method

Liner Type 800 Pcs/Hour PCB V Cut Machine With Multi Continuous Cutting Method

Liner Type PCBA V-Cut Machine PCB Separator CNC Router Machine ZM30-L

PCB V Cut Machine Characteristics
1. PCB V Cut Machine adopts a unique multi-continuous cutting method. The Circuit board are completely splitted by six blades, the upper and lower blade are a group to form a cutting unit, they Are A, B, C groups.The whole cutting process is divided into three parts. The A-group blade cuts the PCB 40% first, then the B-blade again runs through the slot cut by the A-blade, and again completes 40% of the cutting amount, and finally the C-group blade cuts the last 20% , because each time the amount of cutting is small, the stress generated during the cutting process is reduced by more than 80% compared with the traditional one-time cutting method. The edge of the divided circuit board is smooth, and the board surface is very flat.
It is the only machine on the market that can guarantee the deformation of the aluminum board after cutting.

2. Due to the multiple cutting, the cutting process is very smooth, greatly improving the positioning ability of the V-CUT groove. Even if the Circuit board V-CUT groove is very shallow,will not jump out of the V-cut groove guiding knife. Avoid bad boards.

3. Due to the small cutting force of the blade and the high-speed steel material imported from Sweden, the durability of the blade is greatly improved, and the blade life can be more than one year.
4. All cutting blades are calibrated with a stimulating dual-frequency laser interferometer to ensure that the second knife continue to cut accurately in the V-groove after the fist knife cut. The tip of the knife jumps no more than 0.02mm. Ensure the perfect cutting quality.

PCB V Cut Machine Specifacation

Genitec and Seprays are brands of Zhimao Automation Equipment Co., Ltd.
Zhimao Automation Equipment Co., Ltd. professionally provide customers with one-stop PCB depaneling solutions!

We produce most kinds of PCB separators. Including PCB router, laser PCB depaneling machine, V-cut, FPC/PCB punching machine,etc.

• Genitec was founded in Taiwan in 1993, and set up a subsidiary in Dongguan in 2002.Yes,that is Dongguan Zhimao Automation Equipment Co., Ltd.
• In 2003, we set up our factory in Zhejiang Province.And set up subsidiary in Suzhou in 2020.
• Genitec & Seprays: we have been specializing in PCBA separator's R&D and manufacturing for 30 years.

We gain a high reputation with high quality and service in SMT Industry. Our products sell well all over the world.

• We won the quality certification of ISO9001 in 2001, the Ministry of Economic Affairs' Small and Medium-sized Enterprise Division selected as an innovative R&D outstanding small and medium-sized enterprise.
• And won the Taichung County Government Golden Hand Award;
• We have CE certification, dozens of hardware and software patent certificates, and won a high-tech enterprise in 2020.
• We have two modern factories for over 22,000 square meters.
• We have service bases in 9 cities in China and 28 countries and regions around the world in order to provide customers with timely services and needs.