Sturdy Safety Medical Laboratory Centrifuge Maximum Centrifugal Force 2600 Xg
Brand Name:HAIYING
Model Number:TD4
Minimum Order Quantity:1 Set
Payment Terms:L/C, D/A, D/P, T/T
Place of Origin:China
Price:Negotiable
Contact Now
Add to Cart
Active Member
Address:
Room 309, Huineng Building, 38 Huaneng Road
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low
Speed Centrifuge
TD4 Low Speed Centrifuge Application Scope:
It has high safety, excellent quality, and high cost performance.
It is a conventional equipment for the separation and preparation
of suspended solids and is a necessary laboratory centrifugal
separation basic instrument for various laboratories, hospitals at
all levels, and universities.
The TD4 desktop low-speed centrifuge is suitable for experimental
scientific research units such as biochemistry, medicine, pharmacy,
clinical trials, food and environmental protection. It is a
conventional equipment for separation and preparation of suspended
liquids.
| Host technical parameters | |
| product name | Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low Speed Centrifuge |
| Maximum capacity | 8×20 ml |
| power | 120W |
| power supply | AC220V 50Hz |
| Weight (with rotor) | 18 Kg |
| Dimensions (length×width×height) | 380×260×310 mm |
Sturdy Durable Safety Maximum Centrifugal Force 2600 Xg TD4 Low
Speed Centrifuge Product Introduction:
TD4 low-speed table top centrifuge is a machine that uses
centrifugal force to separate the components in the mixture of
liquid and solid particles or liquid and liquid. The centrifuge is
mainly used to separate the solid particles in the suspension from
the liquid, or to separate the two incompatible liquids in the
emulsion with different densities (for example, separating cream
from milk); it can also be used to remove Liquids in wet solids,
such as drying wet clothes with a washing machine; special
ultra-velocity tube separators can also separate gas mixtures of
different densities; using the characteristics of different density
or particle size solid particles in the liquid to settle at
different speeds, and some sedimentation The centrifuge can also
classify solid particles according to density or particle size.
TD4 Low Speed Centrifuge Common failure analysis
After the power is turned on, the control panel displays normal, and the cooling fan works normally. When the start button is pressed, the intermediate relay works and the centrifuge does not work. According to the analysis of the fault phenomenon, the power supply part and the control part should be normal, and the fault should be at the line from the control board to the motor, the carbon brush and the motor. Turn on the centrifuge, use a multimeter to measure the continuity of the line from the control board to the carbon brush, and then measure that the carbon brush does not conduct when it reaches the motor rotor. Carefully observe the poor contact between the carbon brush and the motor rotor. Remove the carbon brush and find that it has been used for too long. Caused by too short. Replace with a new carbon brush, troubleshooting. This kind of failure is a common failure of the centrifuge, and the carbon brushes should be replaced regularly to avoid the above failures.
Sturdy Safety Medical Laboratory Centrifuge Maximum Centrifugal Force 2600 Xg
Inquiry Cart
0