Hardening AMS 5520 Stainless Steel Strip Flat 1mm Bright Annealed
Brand Name:xinzheng
Certification:ISO, EN, MTC
Model Number:Stainless steel strip
Minimum Order Quantity:1 Metric ton
Delivery Time:5-25 Days
Payment Terms:L/C, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
No 1288 Guangrui Road , Liangxi district , WUXI City , Jiangsu province ,P.R,CHINA.
Supplier`s last login times:
within 21 hours
Product Details
Company Profile
Product Details
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 Bright Annealed
Strip, Foil, Wire, AMS 5520, ASTM A693
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 3/4 Hard Bright Annealed overview
PH 15-7 Mo is a precipitation hardenening stainless steel used for applications requiring high strength and moderate corrosion resistance. It is similar to 17-7 with the substitution of 2% Molybdenum for 2% Chromium resulting in higher room and elevated temperature strength for 15-7 Mo. PH 15-7 Mo stainless steel may be formed in a soft austenitic condition and then hardened to high strength levels by low temperature heat treatments. This allows miminum distortion compared to other quench and temper hardening processes. For maximum strength requirements, 15-7 Mo strip can be supplied in the hard-rolled Condition C for heat treatment to condition CH900.
15-7 MO ferritic Stainless Steel precision Strip Coil / Rolls Equivalent Materials
| AISI PH15-7-Mo equivalents | ||
| 0 | DIN 1.4574 | |
| 1 | AFNOR 9160/C65 | |
| 2 | AFNOR 9160C211 | |
| 3 | AFNOR Z6CND15-07 | |
| 4 | AISI 632 (15-7PH) | |
| 5 | SAE PH15-7-Mo | |
| 6 | SAE 632 (15-7PH) | |
| 7 | EN FE-PM 63 | |
| 8 | EN 1.4574 | |
| 9 | UNS S15700 | |
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 3/4 Hard Bright Specification and Dimension Ranges
Specifications
Specifications
AMS 5520 sheet, strip and plate (15-7 Sheet)
MIL-S-8955
AISI 632
ASTM A693 Grade 632
UNS S15700
AMS 5520
AMS 5657
ASTM A564 (632)
ASTM A579 (632)
ASTM A693 (632)
ASTM A705 (632)
DIN 1.4532
DIN 1.4574
MIL S-8955
AMS 5812
AMS 5813
15-7 MO Stainless Steel Strip
Grade: 15-7 MO
Standard: ASTM/EN/JIS
Thickness: 0.03mm-10.0 mm
Width: 1.5mm-620 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K
(Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
| Tempered Condition : | |
| ANNEALED CONDITION | TEMPERED 1/16 HARD |
| Tempered 1/8 Hard | TEMPERED 1/4 HARD |
| TEMPERED 1/2 HARD | TEMPERED 3/4 HARD |
| TEMPERED FULL HARD | Tempered Extra Hard |
| Annealed | 2B /BA/ MIRROR / HL / SATIN / No.1 |
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se, 304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316, 316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405, 409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414, 416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH ,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE 316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 Application
Grade 15-7 stainless steel is used in the following applications:
- Diaphragms
- Welded and brazed honeycomb panels
- Retaining rings
- Aircraft bulkheads
- Springs
- Other applications requiring high strength at elevated temperatures
Type 436 Stainless Steel Precision Strip UNS S43600 BA 2B Soft Hard Tempered Annealed Technical datasheet
Chemical Composition
The following table shows the chemical composition of grade 15-7 stainless steel.
| Element | Content (%) |
|---|---|
| Iron, Fe | 74.9 |
| Chromium, Cr | 15 |
| Nickel, Ni | 7 |
| Molybdenum, Mo | 2 |
| Aluminum, Al | 1.1 |
Physical Properties
The physical properties of grade 15-7 stainless steel are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.81 g/cm3 | 0.282 lb/in³ |
Mechanical Properties
The mechanical properties of grade 15-7 stainless steel are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 900 MPa | 131000 psi |
| Yield strength (@ strain 0.200%) | 380 MPa | 55100 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break | 30% | 30% |
| Hardness, Rockwell B (converted from Brinell hardness) | 88 | 88 |
Thermal Properties
The following table outlines the thermal properties of grade 15-7 stainless steel.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion (@21-93ºC/199ºF) | 9 µm/mºC | 5 µin/in°F |
| Thermal conductivity (@21ºC/70ºF) | 15.1 W/mK | 105 BTU in/hr.ft².°F |
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 Products display and Package Details
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q:What information should i provide to source for the right
products ?
A: Material grade, width, thickness, coating and Purchase quantity
, Expected lead time ,etc
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin,
Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q:How long does your delivery time take?
A:In general, our delivery time is within 5-45 days, and may be
delayed if the demand is extremely
large or special circumstances occur.
Q:Can I visit your location?
A:Of course, we welcome customers from all over the world to visit
our factory. However, some
of the plants are not open to the public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality
before packaging, and unqualified
products will be destroyed.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion
during ocean transportation.
Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00,
after 22:00,
we will reply to your inquiry during the next working day.
AISI PH 15-7 MO Precipitation-Hardening Stainless Steel Strips UNS S15700 AMS 5520 Related Designation At a glance
Product Identifier: High Performance, Stainless Steel and Related Alloys, designated as follows:
Stainless Steel and Related Alloys: 201; 254 SMO; 301; 301 AL; 301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049; 305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316 LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S; 414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li; 434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter 20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507
High Manganese Alloys: Nitronic 321; Nitronic 331; Nitronic 40 (21-6-9)1; Nitronic 501; Nitronic 601. Precipitation Hardening and High Iron Alloys: A 2864; AM-3504; 17-4PH1; 17-7PH1; PH 15-7MO1.
Electronic Alloys: Ulbravar 29-17 (Alloy 2917); Ulbraseal 36 (Alloy 36); Ulbraseal 42 (Alloy 42) Ulbraseal 46 (Alloy 46); Ulbraseal 52. Nickel, Nickel Based & Nickel-Iron-Chromium Alloys: 80Ni-20 Cr; Ni 200; Ni 201; Ni 233; Ni 270; Hastelloy B35; Hastelloy B25; Hastelloy C-45; Hastelloy C2765; Hastelloy C225; Hastelloy G-35; Hastelloy G-305; Hastelloy X5; Haynes 2145; Haynes 2305; Haynes 2425; Haynes 2825; HR 1205; Waspaloy6; Nimonic 753; Monel 4003; Monel 4013; Monel R4053; Monel K5003; Inconel 6003; Inconel 6013; Inconel 6173;
Inconel 6253; Inconel 7023; Inconel 7183; Inconel 7223; Inconel X-7503; Incoloy 8003; Incoloy 8013; Incoloy 8253; Ni-Span-C 9023 Cobalt Based Superalloys and Related Alloys: L-605 (Haynes 25)5; Haynes 1885; N 155; ULMET
Superalloys:
Monel 400, Monel K-500/K500, Waspaloy, L605 (HS 25), Haynes 188, Haynes 230, Haynes 263, HYMU 80/ HY MU 80
1) Monel 400
Monel is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. It is commonly used in applications with highly corrosive conditions. The good resistance against corrosion by acids and oxygen makes monel a good material for the chemical industry.
* Monel 400 Sheet, Plate Per QQ-N-281 CL A, AMS 4544, ASTM-B-127 *
Thickness: 0.018"~3.000", Width: 12"~60", Length: 36"~192"
* Monel 400 Tubing is offered in a variety of requested sizes.
2) Monel K-500 /K500
Small additions of aluminium and titanium form an alloy (K-500) with the same corrosion resistance but with much greater strength due to gamma prime formation on aging.
* Monel K-500/K500 Sheet, Plate Per QQ-N-286 * Thickness: 0.040"~1.000", Width: 36"~48", Length: 60"~180"
3) Waspaloy
* Waspaloy Sheet, Plate Per AMS 5544, Chem AMS 5706 5707 5708 5709 * Thickness: 0.012"~1.000", Width: 12"~48", Length: 36"~120"
4) L605 (HS 25)
Alloy L605 has excellent strength, good oxidation resistance, very good sulfidation resistance, and relatively good resistance to wear and galling. Used in gas turbine parts, bearings, and various industrial applications.
UNS R30605/ Haynes 25
* L605 Sheet, Plate Per AMS 5537, B50T26, B50A460, Thickness: 0.010"~1.500" , Width: 36"~48", Length: 76"~120"
* L605 (HS 25) Vac Melt Bar Per AMS 5759, Diameter: 0.205"~6.5", Length: 144" Random Length
5) Haynes 188
Haynes 188 Alloy is a Cobalt-Nickel-Chromium-Tungsten Alloy that combines excellent high temperature strength with very good resistance to oxidizing environments.
UNS R30188/ Alloy 188
* Haynes 188 Sheet, Plate Per AMS 5608, B50A712, B50TF59, Thickness: 0.010"~2.000", Width: 36"~48", Length: 36"~144"
* Haynes 188 Bar Per AMS 5772, B50TF74, Diameter: 0.400"~7.000", Length: 144" Random Length
6) Haynes 230
Haynes 230 has best balance of strength, thermal stability, oxidation resistance, thermal cycling resistance and fabricability of any major high-temperature alloy. Used in gas turbine combustors and other key stationary components. Also used for heat treating and industrial heating applications, and in the chemical/petrochemical process industry and in fossil energy plants.
UNS N06230/ Haynes 230 Alloy
* Haynes 230 Sheet, Plate Per AMS 5878, ASTM-B-435, B50TF246, Thickness: 0.016"~1.500", Width: 36"~48", Length: 36"~144"
* Haynes 230 Bar Per AMS 5891, ASTM-B-572, EMS 55474, Diameter: 0.500"~4.500", Length: 144" Random Length
7) Haynes 263
* Haynes 263 Sheet, Plate Per AMS 5872, B50A771A, Thickness: 0.063"~0.385", Width: 36"~48", Length: 120"~144"
8) HYMU 80 / HY MU 80
* HYMU 80 / HY MU 80 Sheet, Plate Per Capable of Mil-N-14411 Comp 1, ASTM-A-753 Type 4, Thickness: 0.004"~1.500", Width: 12"~30", Length: 60"~120"
* HYMU 80 / HY MU 80 Bar Per Capable of Mil-N-14411 Comp 1, ASTM-A-753 Type 4, Diameter: 0.250"~2.500", Length: 144" Random Length
9) <Cobalt Alloy>
L605 L-605Sheet, Plate: AMS 5537
L605 L-605 Bar, Alloy # 25, AISI 670: AMS 5759, AMS 5796
10) <Super / High Temperature Alloys>
Invar 36 HRAP Plate: ASTM B-753, MIL-S-16598A AMD 2, Kovar: AMS 7726, AMS 7727, AMS 7728, MIL-I-23011 C1-1
11) Hastelloy Alloys
Hastelloy is a superalloy known for its resistance to high temperatures and stress in severely corrosive environments. Forged primarily from nickel, some types of Hastelloy alloys are common in nuclear reactors, chemical reactors and pipes & valves in chemical installations. Hastelloy X is also used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines.
Nickel-based specialty metal Super Alloy Hastelloy X AMS 5536 is the common Sheet and Plate specification.
UNS N06002/ Hastelloy/ Hastelloy X/ Alloy X
Hastelloy X, Hastelloy X-750: AMS 5754, AMS 5798, AMS 5536, AMS 5587
Hastelloy C 276: AMS 5530, AMS 5750, Hastelloy W, S, N: AMS 5755, AMS 5711, AMS 5607
Waspaloy: AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828, AMS 5706, AMS
5544
Maraging 300: AMS 6514, 4750: AMS 7718
Nickel alloy 200: ASTM-B-160, Nickel 400, Nickel 405, Nickel K-500: AMS 4544, AMS
4574, AMS 4575, AMS 4576, AMS 4674, AMS 4675, AMS 4730, QQ-N-281 A,
QQ-N-281 B
Rene 41: AMS 5545, AMS 5712, AMS 5713, AMS 5800
Haynes 188: AMS 5772, AMS 5801, AMS 5608, AMS 5807
N-155: AMS 5769, AMS 5794, AMS 5532, AMS 5585
Monel K500: QQ-N-286, Inconel 706: AMS 5701, AMS 5702, AMS 5703, Inconel 722:
AMS 5684
Inconel 909: AMS 5884, AMS 5892, AMS 5893, Inconel 925: NACE MR-01-75 Round Bar
Nimonic 75: BS HR5, HR203, HR403, HR504, Nimonic 90: BS HR2, HR202, HR501,
HR502, Nimonic 263: AMS 5872, AMS 5882
MP35N: AMS 5758, AMS 5844, AMS 5845, Alloy 31: AMS 5545, 5712, N155
(Multimet): AMS 5532
Alloy 188: AMS 5608, AMS 5772 ,HY MU-80: AMS 7701, MIL-N-14411, MU
METAL-ANNEALED HALF HARD, 1/2H: AMS 7701, AMS 7702
M-36: AMS 7711, M-27: AMS 7712, M-4, M-5, M-6: AMS 7716
* Nitronic 60, also considered a Super Alloy, is designed to be the best non-galling stainless steel.
Hardening AMS 5520 Stainless Steel Strip Flat 1mm Bright Annealed
Inquiry Cart
0