Low Noise Corrugated Cardboard Making Machine , 5 Ply Corrugated Box Making Machine

high speed corrugated cardboard paper production line/paper making machinery /carton box making machine prices

Specialist: Equipment List:

Main Technical Parameter of Production Line

Main technical data:

1. Model: WJ150-1600 5ply corrugated carton production line

2. Max work Speed: 150 m/min.

Normal work speed: 120-130m/min

3. Manufacture Width: 1600 mm

b. Surface roll width: 1650mm

4. a. Flute Type: UV type.

b. Flute height:A flute 4.3mm, B flute 2.65mm, C flute 3.65mm, E flute: 1.8mm

5. Steam Pressure: Max 1.6Mpa, normal about 1.2-1.3MPa

6. Steam Consumption: 2900 -3200kg/h (suggest use 4T boiler)

7. Voltage: 380V, 50Hz.

8. (Corrugated paperboard: 150-180g/m2, Corrugated paper: 150--180g/m2, liner paper: 150-180g/m2)

Notes: Quality accords with national B grade above standard, Paper water containing rate: 11%±1.

8. Total installed power: 300KW, normal work use: about 240kw

9. Area that machine requires: 72m×10m x 3.8m(length x width x height)

Some Details:

1) Hydraulic mill roll stand:

Specification:

1. Working width: Max: 1800mm, Min: 900mm

2. Paper roll diameter: Max1500mm, Min350mm

3. Max loading capacity at each side: 3200kg

4. Max working pneumatic pressure: 0.6-0.9Mpa

5. Main shaft diameter: 215mm

6. Power requirements: 415V, 50Hz

Machine Introduction:

1. Symmetric structure with two paper reels loading capacity, allowing paper roll change without downtime (without stop the machine).

2. The lift-down arm adopted with cast iron curve structure, slinky, firm and steady.

3. Lift-down, clamp-loosen and left-right move are controlled by hydraulic pressure.

4. Adopts expansion chuck

5. Paper tension controlled by pneumatically operated disc brake, manual setting the tension easily, the tension control unit in auto splicer will take over the control of the brake torque.

6. Moving shaft adopts excellent quality thick wall seamless steal pipe with the bearing axis together, improved intensity and precision.

Raw materials & purchased components:

a. Main shaft: High quality seamless steal pipe

b. Both sides wallboard: resin sand, best cast iron type in China.

c. Main shaft joint channel steal: 280mm

d. Bearing: Chinese famous brand

e. Electric components: Schneider or Omron import product.

f. Pneumatic components: Airtac, Taiwan and China

g. Hydraulic components: Beijing Huade Hydraulic Industrial Group Co., Ltd

2)Single facer

Specification:

Working width: Max: 1800mm

Design speed: 160m/min, normal work speed: 150m/min

Working gas pressure: 0.6--0.9Mpa, steam pressure: 0.9--1.3Mpa

Steam consumption: 0.5--0.8t/h, temperature requirements: 160—200 centigrade

Power requirements: 415V, 50Hz

Corrugating roller width:1850mm

Machine Introduction:

1. Vacuum suction Fingerless design provides perfect flute formation in high speed manufacturing.

2. Individual immersion oil gear type drive box, separating dynamic vibrations improve running stability, easy and fast for maintenance. Three shafts drive lower corrugating roller, pressure roller and gluing roller.

3. The exhaust fun motor drive suction case, absorb corrugated paper surround the corrugating rollers about 180 degree where is positive-pressure zone, make sure big strength for flute making.

4. Lower corrugating roller suction channel within 2mm, prevent the 2layer carton sheet with stripe on the surface of the face paper.

5. With “Self-circulating glue feeding system”, save glue and improve work efficiency.

6. Pneumatic control for pressure roller load/unload, with cushioning effect.

8. Motorized guide plate adjusted the pasting width.

9. Automatic added lubricates oil device.

10. The steel blank on top of machine can separate disconnect to clean garbage inside, not need disconnect whole machine.

11. Motorized glue quantity adjustment with digital readout system optional.

12. Glue unit is engaged and disengaged by cylinder movement, generous opening ensure convenient cleaning and maintenance.

13. Adjust glue thickness: Quantity of pasting glue and controlling glue is controlled by the clearance between glue roller and doctor roller adjust by manual worm box, Automatic PLC type optional.

14. Corrugating rollers and bearing seat as a unit, fast changing flute and easy to maintenance. Loosen the screw and remove small wallboard could unload the corrugating roller.

3) Bridge conveyer:

Description:

This is conveyer bridge is designed for transport single-side corrugated paper by the top of the single facer to the multiplex pre-heater.

Specification:

Working width: Max: 1800mm,

Design speed: 150m/min, normal work speed: 120-150m/min

Machine Introduction:

1. Adopts suction tension device, use high pressure adsorption motor to suction the single face paper, make it flat to input the next process.

2. Installing two operate board, could be adjust on the bridge and ground.

3. Paper receiving device adopts independent frequency conversion control, manufacture enough single face paper to wave type, and make sure enough storage of single face paper, to keep in-phase different speed in manufacture.

4. With feeding paper frame on the bridge and two conveyer belt to transport the single face paper to the bridge, forming wave type to storage the single face paper.

5. The Automatic adjust the position of single face paper, reduce waste paper ratio of the manual operation.

6. Equipped block part, in order to single face paper stack well on the bridge when the machine in high speed.

7. With safety rails, stair cases and board to insure safety of the operator also make easy to operate

4):Sheet Delivery:

D Pre-heater --- Pre-conditioner --- Triplex layer Pre-heater

Description:

This machine is used for heating liner (pre-conditioner for corrugated paper), and dry to control temperature and humidity of liner (pre-conditioner for corrugated paper). Pre-conditioner could be adopts hang type if the operate length of production line was too short.

Specification:

Working width: Max: 1850mm

Diameter of heating roller: 800mm

Wrap angle adjust range: 60-220 degree

Steam temperature: 150-200 centigrade

Steam pressure: 0.25t/h

Power requirements: 415V, 50Hz

Wrap roller diameter: 120mm

Gluing Machine:

Specification:

Manufacture width: 1800mm

Max design speed: 150mm/min

Economic work speed: 120-150mm/min

Temperature requirements: 150~200℃

Steam pressure: 1.12--1.3MPa

Steam consumption: 0.1~0.15MPa

Compress air: 0.6--0.9MPa

Power requirements: 415V, 50Hz

Pressing method: pressing roller type, pressing board type optional

Each roller diameter, thickness and manufacture

Pre-heating roller diameter: 325mm, thickness 20mm, accurate grinding and chromed

Guiding paper roller diameter: 120mm, thickness 15mm, accurate grinding and chromed

Gluing roller diameter: 240mm, thickness 30mm, accurate grinding and chromed

Doctor roller diameter: 100mm, thickness 15mm, accurate grinding and chromed

Suzy yu (Sales Dept.)
Cangzhou Aodong Light Industry Machinery EQUIPMENT Co.,Ltd
Cangzhou City, Hebei Province China
Mob:+86-15903176289
E-mail:suzy@aodongpack.com
QQ:174996398
Wechat:15903176289

Cangzhou AoDong Packaging Machinery Manufacturing Co., Ltd was built in 1999 and high quality enterprise,authorized by Hebei Province Quality and Technical Supervision Bureau,ISO9001 international quality management system certificate and European CE certificate.Our company also hold People's Republic of China Customs Import and Export Right and Packaging Union Vice Chairman Units Honor.Our company specializes in manufacturing 3-ply,5-ply,7-ply corrugated paperboard production line and carton equipment R&D,manufacturing, and oversea's sales.It covers an area of nearly 20,000 square meters,has a first-class R&D team,technical engineers,excellent management talents and domestic and foreign marketing team.

Our products mainly export toAmerica,Russia,Turkey,Korea,Egypt,India,Iran,Pakistan,Vietnam,Mexico,Saudi Arabia,the United Arab Emirates,Samoa,South Africa and other 30 countries,etc.We have set our own branch in overseas market.Also,we obtain good appraisement and high appreciation at home and abroad.We uphold the "On good if water, hold world with virtue" company culture and pursue "Don't miss every detail in order to achieve customer satisfaction" business philosophy,and make excellence of products! In decades year,company's products won the "Hebei quality products" certificates,"Science and Technology Progress Award", and has won the governmental honorable title of the provincial and municipalities levels!