03055398 SSQ2CXL1611 2CXL1611 STM-16 SCC unit, cross-connect unit, and optical interface unit integrated board (L-16.1,LC)

UONEL CO LIMITED

Contact person:Natasha

Mobile/Whatsapp/Skype/Wechat:+86 13798264392

Website:www.uonel.com

03055398 SSQ2CXL1611 2CXL1611STM-16 SCC unit, cross-connect unit, and optical interface unit integrated board (L-16.1,LC)

• OptiX OSN equipment uses a universal switch architecture for unified grooming of packet services and TDM services. OptiX OSN equipment can work in packet mode, TDM mode, or dual-domain (packet+TDM) mode.The three modes can be smoothly switched by upgrading the software of a service board so carriers' requirements on services and networks can be met. The smooth switching between the three modes supports carriers' distributed smooth investment based on the development of the

technology and industrial chain.
Based on a universal switch architecture, OptiX OSN equipment uses the packet transmission
technology to perform efficient statistical multiplexing on data services so the transmission cost
of every bit is reduced. In addition, OptiX OSN equipment uses the Native technology to transmit
TDM services so voice services are transmitted with high quality.

Based on a universal switch architecture, OptiX OSN equipment unifiedly transmits packet
services such as 2G, 3G, and VIP private line services so network overlapping is avoided. In
addition, OptiX OSN equipment transmits TDM services. Carriers can constitute an end-to-end
packet network, dual-domain (packet+SDH) network, or hybrid (MSTP+routers) network that bears L2+L3 services. This complete packet transmission solution allows an evolution from TDM networks to all-IP networks.

• The OptiX OSN equipment uses the built-in WDM technology to transmit several wavelengths
over one optical fiber. In this manner, the OptiX OSN equipment can be interconnected with the
WDM equipment.
The OptiX OSN 1500 provides the built-in WDM technology. The functions of the equipment
are as follows:
• Standard DWDM wavelengths that comply with ITU-T G.694.1 can be added or dropped.
• Standard CWDM wavelengths that comply with ITU-T G.694.2 can be added or dropped.
• A set of equipment can be configured into an Optical Terminal Multiplexer (OTM) or an
Optical Add/Drop multiplexer (OADM), or both.
• Optical add/drop multiplexing boards have concatenation ports which can be used for
expansion or for adding/dropping multiple wavelengths through concatenation.
• The equipment supports Raman amplifiers which can be used in long-distance signal

transmission.
• The equipment supports the automatic gain control technology, which enables the gain of
each working wavelength to change within an allowed range in all scenarios.
• The equipment supports the forward error correction (FEC) technology, which can correct
the errors generated during signal transmission and therefore improve the tolerance of
signal-to-noise ratio at the receive end and extend the length of relay sections.

The OptiX OSN 1500 consists of a cabinet, subracks, and boards.

The OptiX OSN 1500 can be installed in an ETSI cabinet (300 mm or 600 mm deep) or a 19- inch standard cabinet. It can also be installed against the wall.

The OSN1500A functions of the areas are as follows:
• Fan area: This area houses one fan module, which dissipates heat generated by the
equipment.
• Processing board area: This area houses the service boards of the OptiX OSN 1500A.
• Power interface board area: This area houses two power interface boards, which supply
power to the equipment.
• Auxiliary interface board area: This area houses the line, tributary, and Ethernet processing
boards of the OptiX OSN 1500A.
• Cable routing area: This area houses fiber jumpers and cables in a subrack.

The OSN1500B functions of the areas are as follows:
• Interface board area: This area houses the tributary interface boards and Ethernet interface
boards of the OptiX OSN 1500B.
• Power interface board area: This area houses two power interface boards, which supply
power to the equipment.
• Fan area: This area houses one fan module, which dissipates heat generated by the
equipment.
• Processing board area: This area houses the line, tributary, and Ethernet processing boards
of the OptiX OSN 1500B.
• Auxiliary interface board area: This area provides alarm interfaces, an orderwire phone
interface, management and maintenance interfaces, and clock interfaces.
• Cable routing area: This area houses fiber jumpers and cables in a subrack.

• Boards

The OptiX OSN equipment supports cross-connect boards and one system control boards, Packet Processing Boards, SDH Boards, PDH Boards, EoS Boards, ATM Boards, RPR Boards, SAN/Video Boards, PCM Boards, WDM Boards, Optical Amplifier Boards, Auxiliary Boards and Power Boards

We offer all OptiX 1500B board series, below are some for your reference:

03052498 SSRDCXLL1611 STM-16 master cross-connect optical interface board (I-16, LC)
03052499 SSRDCXLL1612 STM-16 Master Controlled Crossing Interface Board (S-16.1, LC)
03052500 SSRDCXLL1613 STM-16 master cross-connect optical interface board (L-16.1, LC)

Optical Interface Board (L-4.1, LC) 2xSTM-4 Optical Interface Board (L-4.1, LC) SSN1SLD4A
Optical Interface Board (L-4.2, LC) 2xSTM-4 Optical Interface Board (L-4.2, LC) SSN1SLD4A
STM-4 optical interface board (S-4.1, LC) SSN1SL4A (S-4.1, LC)

SSN1EFT8 16 port 10M / 100M Ethernet transparent transmission processing board
03030EAF SSN1EFT8A 8-port 10M / 100M Ethernet transparent transmission processing board
03039006 SSR1EFT4 4-port 10M / 100M Ethernet transparent transmission processing board

(1000BASE-SX, 850-LC) 4-port Gigabit Ethernet / Fast Ethernet processing board with switching capability (1000BASE-SX, 850-LC)
(1000BASE-LX, 1310-LC) 4-Port Gigabit Ethernet / Fast Ethernet Processing Board with Switched Interface (1000BASE-LX, 1310-LC)
(1000BASE-VX, 1310-LC) 4-Port Gigabit Ethernet / Fast Ethernet Processing Board with Switching Function (SSBE)

03026740 SSN1EU08 8xSTM-1 Electrical interface lead-out board
03026741 SSN1OU08 (S-1.1, LC) 8xSTM-1 Optical port outlet board (LC, S-1.1)
03026951 SSN1MU04 4xE4 & STM-1 Electrical connection lead-out board

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices

100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.

Free Technical Support:

Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original newRouters,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.

Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.