Large Capacity horizontal Mining Hammer Crusher , Hammer Stone Crusher 0.9t-19t

Large Capacity horizontal Mining Hammer Crusher , Hammer Stone Crusher 0.9t-19t

Principle
After entering into the crusher,ore receives impact from tailwagging hammerhead and falls to pieces. The fineness for exit is in the scope of 2-20mm, and the granularity for entrance is required to be within the scope of 200mm. It is characterized by large reduction ratio, low energy consuming, high rate of crushing and easily-operated, etc.

Application and introduction

Hammer crusher crushes materials by high-speed rotation of the hammer and impacting surface of materials, it has characteristics of a simple structure, large crushing ratio and high-efficiency production, etc,and can be used for dry and wet forms of crushing.Hammer crusher is used for crushing materials that is medium-hardness and weakly abrasive. The compressive strength of the material does not exceed 100 Mpa,its water content is less than 15%.Materials are coal, salt, chalk, plaster stone, alum stone, brick, tile, limestone etc. In addition,the hammer crusher is not only used in crushing production line and sand production line ,but also can substitute cone crusher in mineral production line.

Technical Specifications and Performance

Productivity affected by the granularity and hardness of the material to be broken.The greater the granularity and hardness are, the lower the output is.Or, on the contrary, The productivity index above is just for reference by users.

Company introduction

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

FAQ to save your precious time!

Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

​►Our company was founded in 1971 and has a history of more than 40 years. Rich experience and strong strength are the primary guarantee for equipment quality and after-sales service.

►We are located in the triangle of Beijing, Tianjin and Tang, with superior geographical location and convenient transportation. It is 180 kilometers away from Tianjin Port (3 hours by car) and can guarantee timely delivery.

►Choose excellent raw materials. The steel materials are selected from well-known domestic manufacturers as suppliers to fully guarantee the chemical composition of the raw materials and the mechanical properties of the equipment.

►Strict product testing. Welding is submerged arc welding, and each weld is inspected by a flaw detector (ultrasonic

flaw detection). After passing the test, it will continue to the next process.

►After each equipment is completed, it will be installed and run in the factory to ensure stable operation of the equipment before it is loaded and shipped.
After heat treatment, the casting spare parts are machined in our factory for processing. After processing, the quality inspection department will conduct quality inspection and flaw detection.

Q1: Hi, are you a mining machinery manufacturer?

Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?

Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.