Industrial Serial To Ethernet Controller MQTT RTU Converter Module

Brand Name:IOTROUTER
Certification:CE FCC RoHs
Model Number:ZHC1921
Minimum Order Quantity:1PCS
Delivery Time:1 WEEK
Payment Terms:L/C, T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Location: Chengdu Sichuan China
Address: No.15, 19/F, Building 1, No. 888 middle Yizhou Avenue, High-tech Zone, Chengdu City Sichuan Province CHINA
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Industrial Serial Port to Ethernet RTU Converter Module with MQTT Factory


Parameters of ZHC1921


POWER
NETWORK
POWER SUPPLY
9~36V
NETWORK TYPE
ETHERNET
Working Current
200mA(aver)/340mA(max)@9V
NUMBER
LAN*1
50mA(aver)/850mA(max)@36V
PORT TYPE
Ethernet signal, RJ45
SERIAL PORT
DO
Serial Port
RS485*1
Standard
(NO,COM)*4
Standard
RS485: 2 Two terminals(A,B)
AC
250V 10A
Baud rate
600~921600bps
DC
30V 10A
Data bits
8, 9
DI
Stop bits
0.5, 1, 1.5, 2
Standard
DI*6 COM*1
Parity bits
NONE,EVEN,ODD
Detect Range
5~50v High 0~2v Low
PI
AI
Number
1
Number
4
Standard
PI*2 COM*1
Standard
AI*4 COM*2
Detect Range
10000Hz
Detect Range
4~20mA


Introduction​ of ZHC1921


ZHC1921 is a network IO product that supports 6-way dry (wet) node detection, 4-way relay (COM, NO) output, 4-way analog (current 4~20mA) detection, and 1-way serial port transparent transmission, compatible with Modbus RTU/TCP protocol. With "remote control" as the core of the function, it is highly easy to use, and users can easily and quickly integrate into their own systems to achieve remote based on Ethernet and RS485 with Local control.


  • Function​ of ZHC1921

The default IP address of ZHC1921 is 192.168.0.65. The configuration requires that the computer and ZHC1921 IP be set to the same IP address segment, otherwise the device and the computer cannot communicate.
ZHC1921 has built-in parameter configuration webpage. Users who use this device do not need to pay attention to the relevant holding registers of the device. They only need to understand the reported data of the device.


Set up ZHC1921 then use the Ethernet cable to connect the network port of the network device (router/switch/other) with ZHC1921. After the device is powered on, observe that the WORK indicator should flash for 3s, indicating that the network hardware environment where the device is located is normal and Ethernet data can be exchanged.




ZHC1921

RS485 Modbus

RS485 Automatic Acquisition

Virtual Serial Port

Connfiguration Software

Threshold Report

4 Channel Socket

Customize the Follow Logic of Ports

MQTT/Modbus RTU/TCP

China Industrial Serial To Ethernet Controller MQTT RTU Converter Module supplier

Industrial Serial To Ethernet Controller MQTT RTU Converter Module

Inquiry Cart 0