Bottled Mineral Water Filling Machine
Brand Name:SUNRISE
Certification:EcoVadis audit, UL certification, SGS certification, Sedex certification, European Union PED, American ASME, German TUV, Russian GOST, European Union ATEX, Australia AS1210, CE, ISO
Model Number:KSCGF
Minimum Order Quantity:1
Delivery Time:120 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Beijing Jiangsu China
Address:
No. 101, Beijing East Road, Economic and Technological Development Zone, Siyang County, Jiangsu Province, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Working process of bottled mineral water filling machine:
The bottled mineral water sucks the bottle through the air duct,
and then rotates the washing machine of the three-in-one machine
through the bottle star wheel. The bottle holder on the turntable
of the bottle washing machine senses the bottle clamp. The bottle
clamp clamps the mouth of the bottle. It rotates 180° along the
guide rail to make the mouth of the bottle in a specific area of
the washing machine. After the bottle is sucked clean, clamp the
bottle with the bottle, and then move the bottle 180° along the
nozzle. Mouth up. The washed bottles are transported from the
washing machine to the suction machine through the star wheel. The
bottles entering the output machine are clamped by the bottle
pallet, and the bottles are attracted under the action of the
circulation, and then they are activated by the opening of the
bottle mouth. The anti-freeze knife on the anti-capping machine on
the capping machine is stuck, and the bottle rotates and rotates
firmly. Rotary head cap is rotated in the vertical plane. The
entire capping process. The finished bottles are transported from
the capping machine to the bottle chain through the bottle-out
dial.
Maintenance of bottled mineral water filling machine:
Frequent failures will definitely cause losses to the production
enterprise, so the daily maintenance of the mineral water filling
machine is particularly important.
1. Before operating the mineral water filling machine equipment,
carefully read the instructions and installation precautions
provided by the supplier, understand the principle of the
equipment, and be familiar with the operation methods and debugging
skills;
2. 2, in order to secure stability in the filling process, the need
for a corresponding reserve program excursion; and periodically
check the system described above;
3. During the running-in period, the mineral water filling machine is easy to leak oil in terms of fastening and lubrication, so it should be inspected and maintained in time;
4. When it is found that the bottled mineral water filling production equipment is malfunctioning, press the emergency stop button in time, turn off the power if necessary, find out the cause, and eliminate the malfunction;
5. The filling machine has strict requirements on the operating
environment. It needs to be cleaned before leaving get off work
every day to keep the equipment dry and hygienic;
6.The water used in the bottled mineral water filling machine
refers to the natural gushing out of the mountains, forming seepage
water. Non-river water sources, lakes (except mountain lakes) and
drinking water system water sources of residents shall only be
properly filtered and disinfected, and the original water sources
shall be retained. It contains a certain amount of minerals and
trace elements, does not add any chemical substances, and is sealed
in a packaging container for direct drinking.
Equipment installation:
1. Early understanding
The preliminary understanding is mainly to prepare for the later
installation, understand the composition and operation mode of the
filling machine through the planning drawings, pictures, videos and
other information provided by the supplier in the early stage, and
make corresponding preparations for water, electricity, and gas in
advance;
2. Equipment placement
Equipment placement includes location placement, configuration of power supply, configuration of air source, and configuration of water source; the following points are mainly emphasized during the installation process:
(1) First check the completeness of the equipment and accessories according to the list provided by the supplier;
(2) After the equipment is docked, the machine needs to be leveled and the foot pads locked to reduce the vibration of the equipment;
(3) The power supply needs to be safely grounded, and the air source is required to be 0.4-0.6mpa, to maintain the stability of the air source, and the water inlet and drainage system is stable and reliable, safe and sanitary;
(4) When the equipment is installed, the equipment supplier will arrange after-sales engineers to guide and train. During this process, relevant precautions need to be recorded to facilitate subsequent equipment maintenance;
END
Equipment maintenance:
1
Frequent failures will definitely cause losses to the production
enterprise, so the daily maintenance of the mineral water filling
machine is particularly important.
2
Before operating the mineral water filling machine equipment,
carefully read the instructions provided by the supplier and the
notes during installation, understand the principle of the
equipment, and be familiar with the operation methods and debugging
skills;
3
To ensure the safety and stability of the supply of water,
electricity, and gas systems, a backup plan corresponding to sudden
abnormalities is required; and the above systems are checked
regularly;
4
When the mineral water filling machine is in the running-in period,
it is easy to leak in the fastening and lubrication, so it is
necessary to check and maintain it in time;
5
When the mineral water filling machine is found to be faulty, press
the emergency stop button in time, turn off the power if necessary,
check the cause, and eliminate the fault;
6
The filling machine has strict requirements on the operating
environment, and it needs to be cleaned before leaving get off work
every day to keep the equipment dry and hygienic;
7
Before starting a machine that has not been running for a long
time, carefully check the in place of the water, electricity, and
gas systems, the fastening of parts, the lubrication of the
transmission system and the replacement of wearing parts; the
product will be tested after running slowly for a period of time. .
Bottled Mineral Water Filling Machine
Inquiry Cart
0