Galvanized Flooring LED Step Retractable Stadium Seating Movable

Galvanized Flooring LED Step Movable Retractable Bleacher Seating


Feature of Retractable Bleacher Seating

The telescopic grandstand system could save the space where you need to carry out multiple events in the limited area.

This bleacher could be assembled as you need, the length could be change by adjusting the quantity of sets.

The retractable stadium bleacher seating has LED lights, suitable for studio use.
Bleacher Seat design is comfortable,complied with ergonomics.

1. Stand support is cold-drawn and formed of excellent carbon steel plate, which can increase the strength and toughness of the material, improve the mechanical properties of the material, and enhance the stability of the structure. Due to the various sizes of the stands, the final size is determined by the size of the actual venue and the type of seats. The seat width and low back seats of the stands are 700mm, and the floor height is 300mm. The stands are completely covered, especially the two sides are covered with 3mm thick steel plates, the surface connection and painting are completely smooth, and the final effect surface is a whole. The back of the stand is arranged with honeycomb aluminum panels, and the bottom counter board is used. The finished aluminum plate retains the "mirror" polishing effect.
2. Cart and load-bearing wheels: The cart includes a 100×50×3mm column, 130×50×3mm feet, and is equipped with an anti-bending system with anti-friction bearing components. The load-bearing wheel adopts a wide wheel, and the large caster wheel adopts an outer high-strength polyurethane PU wheel with a diameter of 125mm and a spoke of B=40mm. It has sufficient load-bearing strength and appropriate elasticity. The inner layer adopts double ball bearings and the middle is The nylon layer is covered with a high-toughness and wear-resistant polyurethane layer, which can withstand heavy loads and can rotate flexibly, with little friction, and does not damage the wooden floor. The wheels of the stands are distributed in multiple rows, and each row is uneven, which can reduce the stand against the wooden floor. The stress can prolong the service life of the wooden floor.
3. Load-bearing beam: The size of the load-bearing beam is 50×40×3mm, 100×50×3mm, which is installed at a center distance of about 70cm and welded between the main beam and the auxiliary beam. The cold-rolled steel plate with sufficient bearing capacity is used, and after folding, it is sprayed to make it not only has good corrosion resistance, but also has a smooth and clean outer surface. The secondary beam has a size of 50×35×2 and serves as the end element for all wooden support arms and walking surfaces. The supporting arms between the supporting frames are applied to the main beam to eliminate sliding friction and lubricate the rollers and nails through the action of the mechanical surface.
4. Tighten the sling: the system is anchored on the foundation of the cart column through diagonal supports, close to the center of the rear beam, and each row of diagonal supports is arranged in pairs, consisting of a 40×25×2.5mm closed part, and a horizontal element at the bottom. The size is opposite to the diagonal support, connecting the pillar and the bottom of the cart, and is fixed on the top of the support.
5. Movable steps Movable step keel is supported by high-quality carbon steel profile welding. Each layer is equipped with a 700mm*350mm*150mm box-shaped step and a row number sign. The surface layer adopts 18mm high-strength veneer laminate (17mm laminate + 1mm trihydrogen ammonia board) aluminum alloy decorative profile edging, so that the pedal has both high strength and beautiful outer surface, and the surface has a fireproof function, which can withstand such Cigarette butts and other open flames. The surface layer is fixed by rivets and auxiliary stands of the stands to ensure the high strength and structural stability of the movable steps.
6. ​​Decorative profiles The stand surface is covered with a special aluminum-titanium alloy, with special non-slip lines attached to increase the strength of the profile and prevent the audience from slipping when walking. The surface layer adopts 18mm high-strength veneer laminate (17mm laminate + 1mm trihydrogen ammonia board) aluminum alloy decorative profile edging, and the front of the stand bed frame adopts a special aluminum-titanium alloy profile to increase the bearing strength. At the same time, the front edge is inlaid with non-slip and wear-resistant rubber and plastic strips, so that they will not fall off, and have the effect of protecting the aluminum-titanium alloy strips and preventing the audience from slipping, which is both beautiful and practical.
7. The synchronization mechanism is composed of double-layer guide bearings and side rollers to ensure that the stands make a balanced linear movement during expansion and contraction, reducing the friction of the stands. Through the self-locking mechanism, it is ensured that the surface layers of the stands are stretched and synchronized in sequence.

Why Choose Us?

Honest merchants: We insist on strict control of product quality, rely on quality to expand the market, and encourage technological innovation.

Quality Assurance: Over the years, we have been trusted by customers with stable products, timely delivery, and excellent after-sales service. We have a broad market and a good reputation.

Price commitment: In order to ensure the reliability of the product, all materials selected are high-quality steel. Under the same competitive conditions, on the basis of not reducing the technical performance of the product, we will sincerely provide it at a preferential price.

FAQ

1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.

2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.

2.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.

4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen

5.What’s your payment terms?
TT transfer is preferred.

6.Do you have color choice?
Yes, we have multi colors for the clients.

Aireach Seating locates in the city of Chongqing, Which is the biggest city in China, and our factory is founded in Chengdu city in 1989.We specialize in manufacturering telescopic bleachers, outdoor bleachers,multi type of stadium chairs, auditorium chair, school chairs.

We mainly supply high-quality products to South East Asia, Middle East, Europe,American countries and some African countries. Supplying the best seating all over the world is our only pursuit.

We have several enggineers who have more than 20 years experience in this industry.They're the very beginning explorer who learn the experience from Japan.They are experienced and creativity for producing,designing wide range of retractable bleachers, stadium chairs and auditorium chairs.