JUYI JYQD-YL01D 12V ~48V DC Brushless Hall Sensor Motor Driver Board Motor Controller
Brand Name:JUYI
Certification:CE,
Model Number:JYQD-YL01D
Minimum Order Quantity:1 set
Delivery Time:5-10 days
Payment Terms:T/T,L/C,Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu China
Address:
No.299 Changjiang North Rd, Changzhou City, JIangsu, China
Supplier`s last login times:
within 3 hours
Product Details
Company Profile
Product Details
JUYI JYQD-YL01D 12V ~48V DC brushless hall sensor motor driver board motor controller
The Single driver board has four versions for your choice,please let us know which version you want.
| Model | JYQD_YL01D(8559) | JYQD_YL01D(457E) | JYQD_YL01D(99F2) | JYQD_YL01D(C737) |
| Working Temperature(℃) | -20~85℃ | -20~85℃ | -20~85℃ | -20~85℃ |
| Workig Voltage(V) | 12~48VDC | 12~48VDC | 12~48VDC | 12~48VDC |
| Max operating Current(A) | 15A | 15A | 15A | 15A |
PWM speed control PWM frequency(1-2KHz) | Duty cycle 0~100% | Duty cycle 0~100% | Duty cycle 0~100% | Duty cycle 0~100% |
| Analog voltage speed regulation (V) | 0~5V | 0~2.5V | 0~5V | 0~2.5V |
| Liner Brake (V) | 0~5V | 0~2.5V | 0~5V | 0~2.5V |
| Speed pluse signal output | √ | √ | √ | √ |
| Reversing function | √ | √ | √ | √ |
| Safe start function | × | × | √ | √ |
Application Notes:
1. Confirm that the voltage and power parameters of the motor not
exceed the range of the driver board as specified.
2. This driver board is used for 3-phase brushless sensorless
motor, but not suit for all 3-phase brushless sensorless motors
directly.The hall angle should be 120 degrees.
3. The brake function of JYQD-YL01D is reactive brake.The motor
turns the brake to produce energy for recycling.Please don’t use
the brake function when testing with a regulated power to avoid
damage driver.
4.The 5V output port on the driver board,can be controled by the
single-chip cumputer with the current lower than 100MA.
5.Pleasse pay attention to the insulation and heat dissipation
about the driver board.
6.Safety start function:If the speed regulation is not in right
place or the speed rehulation is invalid after power-on, please
make the speed regulation or brake reset can be ok.
JYQD-YL01D Driver board Applications:
Remote control electric vehicle, two -wheel balance vehicle, remote
control wheelchair, medical machine,amusement vehicle, robot, etc.
Driver board wiring diagram:
1. Control port (right) 2.54 hole spacing
5V-control board internal output 5V.
EL - brake control port, reactive linear brake, with energy
recovery function, analog voltage brake 0-5V. In the case of
constant speed +, the higher the brake voltage, the greater the
braking force 0-100%.
M-Speed signal output port, pulse frequency is proportional to
motor speed (pulse ratio is related to motor)
Z / F-Positive and reverse control port. Hard change, 5V or
suspended to one direction,GND to the other direction.
VR - speed control port, analog voltage speed regulation
0V-5V(0-2.5V) speed regulation, linear speed regulation from low to
high. External PWM speed regulation needs to be shared with the
drive board.
GND - control board.
2. Power port (left) 3.96 hole spacing
P + -Power input cathode 12V-48V (support lithium)
P- -Power supply input negative electrode
MC / W- -One of the motor phase line
MB / V- -One of the motor phase line
MA / U- -One of the motor phase line
GND - -Motor Hall negative electrode
HA-motor Hall signal one
HB- -motor Hall signal one
HC- -Motor Hall signal is one
5V- -Motor Hall positive pole
3. Use shielded wires if the drivers board has more than 50 cm
distance from the motor, otherwise it may lead to abnormal driving,
affecting the normal use.
4. Pay attention to the heat dissipation if continue working with
the max. Current.
Driver board Dimensions:
JUYI JYQD-YL01D 12V ~48V DC Brushless Hall Sensor Motor Driver Board Motor Controller
Inquiry Cart
0