SS811E ASTM Silicone Weatherproofing Sealant 500ml Caulk Sealant Waterproof

FEATURES

A. Excellent weather-ability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes

B. Remains flexible over a temperature range of -58°F(-50°C) to 302°F (150°C)

C. Excellent un-primed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles

D. Extension/compression movement capability of up to ±50% of the original joint width

E. Suits applications in the areas with large difference in temperature and low humidity

F. Odorless, non-corrosive curing system

G. Good compatibility with other neutral silicone sealants

TYPICAL PROPERTIES

APPLICATIONS

A. Sealing in expansion joints for concrete, plastic and metal etc.

B. Sealing in roof joints and ACP curtain wall

C. Weather sealing in glass curtain wall joints

D. Weather sealing in metal, enamel curtain wall joints

E. Many other uses

SPECIFICATIONS

BAIYUN SS811E Silicone Weather Proofing Sealant meets or exceeds the requirements of the following specifications for one-part sealants.

ASTM Specifications:

Ÿ ASTM C920; TypeS, Grade NS, Class50, Use NT, A, G, M, O

COMPOSITION

A. One-part, neutral-curing

B. RTV silicone sealant

COLORS

Available in black, gray and white (standard colors)

Available in other wide variety of colors (customized)

PACKAGING

BAIYUN SS811E Silicone Weather Proofing Sealant is available in 10.1 fl. oz. (300 ml) plastic caulking cartridges,16.9 fl. oz. (500 ml) foil sausage packs.

USABLE LIFE AND STORAGE

When stored at or below 27ºC (80ºF) in the original unopened containers, BAIYUN SS811E Silicone Weather Proofing Sealant has a usable life of 12 months from the date of manufacture.

LIMITATIONS

BAIYUN SS811E Silicone Weather Proofing Sealant should not be used, applied or recommended:

A. In structural glazing applications or where the sealant is intended as an adhesive.

B. In areas where abrasion and physical abuse are encountered.

C. In totally confined spaces as the sealant requires atmospheric moisture for cure.

D. On frost-laden or damp surfaces

E. To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.

F. On PMMA, PC substrates

G. In below-grade applications

H. On substrates made of polypropylene, polyethylene, polycarbonate and polytetrafluoroethylene.

I. Where movement capability greater than ±50% is required.

J. Where painting of the sealant is required, as the paint film may crack and peel

K. For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)

L. To surfaces in contact with food

M. For use underwater or in other applications where the product will be in continuous contact with water.

HOW TO USE

Complete design and installation guidelines are contained in the BAIYUN Technical Manual when using this product.

HEALTH AND ENVIRONMENT INFORMATION

For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological toxicological and other safety-related data.

HANDLING AND SAFETY

PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN CUSTOMER SERVICE.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer’s tests to

ensure that the products of Guangzhou Baiyun Technology CO.,LTD. are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.

The warranty of Guangzhou Baiyun Technology CO.,LTD. is that the product will meet the Guangzhou Baiyun Technology CO.,LTD. sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchasing price or replacement of any product shown to be other than as warranted.