EN 10025-2 S355JR Grade Low Alloy High Strength Steel Plate
Brand Name:Gnee
Certification:SGS
Model Number:According to customer requirements
Minimum Order Quantity:1 Ton/Tons
Payment Terms:D/A, D/P, L/C, T/T, Western Union, MoneyGram
Place of Origin:Tianjin, China
Contact Now
Add to Cart
Verified Supplier
Location:
Anyang Henan China
Address:
25th Floor, Huafu Commercial Center, Wenfeng District, Anyang City,Henan Province
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
S355JR high strength steel plate is a low alloy high strength structural steel that meets the European standard EN10025. It plays an important role in many fields with its high strength, good toughness, welding performance and corrosion resistance.
S355JR high strength steel sheet has high tensile strength and
yield ratio, and can withstand various complex loads and stresses
to ensure the safety and stability of the structure.
S355JR low alloy steel plate is easy to carry out various welding
processes, such as manual arc welding, submerged arc welding, gas
shielded welding, etc., which can provide more design flexibility.
Chemical composition % of steel S355JR (1.0045): EN 10025-2-2004
| C | Si | Mn | P | S | N | Cu | CEV |
| max 0.24 | max 0.55 | max 1.6 | max 0.04 | max 0.04 | max 0.012 | max 0.55 | max 0.47 |
Mechanical properties of steel S355JR (1.0045)
| Nominal thickness (mm): | to 3 | 3 - 100 | 100 - 150 | 150 - 250 |
| Rm - Tensile strength (MPa) Flat and long products | 510-680 | 470-630 | 450-600 | 450-600 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 | 150 - 200 | 200 - 250 |
| ReH - Minimum yield strength (MPa) Flat and long products | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 |
| KV - Impact energy (J) longitud., | -20° 27 | 0° 27 | +20° 27 |
| Nominal thickness (mm): | to 1 | 1 - 1.5 | 1.5 - 2 | 2 - 2.5 | 2.5 - 3 |
| A - Min. elongation Lo = 80 mm (%) parallel, | 14 | 15 | 16 | 17 | 18 |
| Nominal thickness (mm): | 3 - 40 | 40 - 63 | 63 - 100 | 100 - 150 | 150 - 250 |
| A - Min. elongation Lo = 5,65 √ So (%) parallel, | 22 | 21 | 20 | 18 | 17 |
| Grade | Thickness (mm) | Min Yield (Mpa) | Tensile (Mpa) | Elongation (%) | Min Impact Energy | |
| S355JR | 8mm-100mm | 315Mpa-355Mpa | 450-630Mpa | 18-20% | 20 | 27J |
| 101mm-200mm | 285-295Mpa | 450-600Mpa | 18% | 20 | 27J | |
| 201mm-400mm | 275Mpa | - | 17% | 20 | 27J | |
EN 10025-2 S355JR Grade Low Alloy High Strength Steel Plate
Inquiry Cart
0