Two Phase Liquid Cooling Immersion Cryptocurrency Cooler
Brand Name:Shenglin
Certification:CE
Model Number:SHSL-D1 Series
Minimum Order Quantity:1
Delivery Time:30~35 days
Payment Terms:T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Room B321, Building No.1, No. 619, Longchang Road, Yangpu District, Shanghai,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Two-phase Liquid Cooling Liquid Immersion Cooling Systems For Cryptocurrency Mining Farms
What's Immersion Cooling?
Also known as liquid submersion cooling. It is the practice of
submerging computer components (or full servers) in a thermally,
but not electrically, conductive liquid (dielectric coolant)
allowing higher heat transfer performance than air and many other
benefits.
Why many large data centers have already moved or are considering
the move to immersion cooling?
| 1. Up to 25% increase in power efficiency |
| 2. Up to 80% cost reduction |
| 3. Up to 60% hashrate increase |
| 4. 50%+ equipment lifespan. |
Introduction of Two-phase Liquid Cooling:
The cooling liquid undergoes a phase change in the process of
circulating heat dissipation. The cooling liquid takes away the
heat from the server and then undergoes a phase change
gasification. The gaseous cooling liquid is condensed by the
condenser and becomes liquid again and returns to the liquid
cooling tank; the cooling liquid can use 3M electronics The boiling
point of the coolant FC-72 and FC-72 is above 50℃.
In this case, the temperature of the water in the condensing coil
does not need to be too low. The use of a dry cooler can meet the
heat exchange requirements and take away the heat.
The two-phase liquid cooling has a high heat transfer efficiency
due to the phase change of the electronic cooling liquid.
The disadvantage is that during this phase change, the electronic
fluorinated liquid will escape during the vaporization process, so
there is a certain degree of tightness of the container. However,
it should not be too sealed to prevent the cooling system from
being interrupted and the cylinder explosion event, so certain
safety facilities need to be set up.
Technical parameter
Dry cooler D1 series parameter (fin space 2.1mm)
| Type | D1-005- 1x350 | D1-006- 1x350 | D1-007- 1x350 | D1-009- 1x450 | D1-011- 1x450 | D1-013- 1x450 | D1-014- 1x500 | D1-017- 1x500 | D1-020- 1x500 | ||||||
| Capacity | Water | 35℃ outdoor temp. | Inlet | 45℃ | △ | KW | 4.89 | 5.9 | 6.83 | 9.39 | 10.99 | 13.33 | 14.32 | 17.01 | 19.8 |
| outlet | 40℃ | Y | |||||||||||||
| 20% Glycol | Inlet | 45℃ | △ | 4.72 | 5.69 | 6.69 | 8.9 | 10.61 | 13.05 | 13.91 | 16.11 | 19.29 | |||
| outlet | 40℃ | Y | |||||||||||||
| Medium | Water flow | M3/h | 0.85 | 1.03 | 1.2 | 1.63 | 1.91 | 2.3 | 2.5 | 3 | 3.5 | ||||
| Pressure drop | kPa | 36 | 31 | 58 | 25 | 40 | 80 | 50 | 60 | 40 | |||||
| Air flow | △ | M3/h | 2828 | 2712 | 2492 | 6199 | 5827 | 5225 | 8469 | 8168 | 7601 | ||||
| Y | |||||||||||||||
| Fan motor | Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 | |||||
| △ | W | 140 | 140 | 140 | 540 | 540 | 540 | 830 | 830 | 830 | |||||
| Y | |||||||||||||||
| △ | A | 0.6 | 0.6 | 0.6 | 1.1 | 1.1 | 1.1 | 1.45 | 1.45 | 1.45 | |||||
| Y | |||||||||||||||
| Fan | No X φ | 1x1x350 | 1x1x350 | 1x1x350 | 1x1x450 | 1x1x450 | 1x1x450 | 1x1x500 | 1x1x500 | 1x1x500 | |||||
| Sound pressure level | △ | dB(A) | 31 | 31 | 31 | 43 | 43 | 43 | 49 | 49 | 49 | ||||
| Y | 10m | ||||||||||||||
| Dimension | L | mm | 870 | 870 | 870 | 1020 | 1020 | 1020 | 1220 | 1220 | 1220 | ||||
| W | mm | 525 | 525 | 525 | 625 | 625 | 625 | 825 | 825 | 825 | |||||
| H | mm | 797 | 797 | 797 | 820 | 820 | 820 | 870 | 870 | 870 | |||||
| A | mm | 690 | 690 | 690 | 840 | 840 | 840 | 1040 | 1040 | 1040 | |||||
| B | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- | |||||
| C | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- | |||||
| D | mm | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | |||||
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” | |||||
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” | |||||
| Product weight(empty) | kg | 38 | 42 | 48 | 55 | 60 | 67 | 75 | 82 | 91 | |||||
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for horizontal air discharge please add “H” in nomenclature, for excmple:SHSL-D1-005H-1X350
Some data center cooling reference:
For data center cooling:
Country: Mongolia Application: match with precision air conditioner Cooling capacity: 17.6kW Cooling medium: 34% ethylene glycol Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Russia Application:data center cooling Cooling capacity: 763kW Cooling medium: water Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg |
The immersion cooling system diagram by dry cooler/dry cooling tower:
Two Phase Liquid Cooling Immersion Cryptocurrency Cooler
Inquiry Cart
0