3.5 Inch Mipi Interface TFT Display module 320x480 industrial touch display
Brand Name:Adia
Certification:RoHS
Model Number:YT035F001
Minimum Order Quantity:10pcs
Delivery Time:20-25
Place of Origin:china
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
4th floor, building 3, zone 1, Hongdu Industrial Park, lezhujiao, Hangcheng street, Bao'an District, Shenzhen City, Guangdong Province, China
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
3.5 inch Mipi interface industrial touch display 320x480 touch TFT display introduction
Feature
touch TFT display: 480 x 320 display resolution (HDMI input
resolution supports 480*320 to 1920*1280 any resolution); 3.5mm
audio/headphone jack makes the display no longer silent.
Perfect for Raspberry Pi 4: Micro HDMI adapter included,
hassle-free connection to Raspberry Pi 4; Also compatible with all
other Model A&B series.
Efficient heat dissipation: This screen is mounted with a brushless
quiet fan and powerful heat dissipation, you don't need to worry
about the overheating problems and the noise.
More Features: supports HDMI audio split; Refreshes up to 30 frames
per second; The backlight can be turned on/off. Plug & Play:
Don’t need to reboot the Pi when connected and it doesn’t require
any external power supply.
Portable Touchscreen: the overall dimension of this tiny screen is
3.38”×2.20” (86mm×56mm), and the included stylus, heatsinks, and
HDMI adapters make this kit completed and convenient to use.
The specification YT035F001 is a 3.47” a-Si TFT Liquid Crystal
Display ODF cell. The ODF cell has been designed by INX, and
manufactured by INX under the agreement of customer. The a-Si
TFT-LCD cell will be applied to a high transmittance operating in
the normally black modea-Si TFT-LCD product.
Product Specification of 3.5 inch industrial touch
| General Features | |||
| Diagonal Size | 3.5 inch | Type | LCM, a-Si TFT-LCD |
| Pixel Format | 1440(RGB)×1600 | Configuration | RGB Vertical Stripe |
| Active Area | 59.4 (W)x66.0 (H) mm | Outline Dim. | 62.2 (W)x73.6 (H)x1.65 (t) mm |
| Bezel Area | - | Treatment | Hard coating |
| Luminance | 150 cd/cm2 (Typ.) | Contrast Ratio | 700:1 (Typ.) |
| View Direction | Symmetry | Response Time | 5 ms (Tr+Tf) (Min.) |
| Viewing Angle | 60/60/60 | Operating Mode | IPS, Normally Black, Transmissiv |
| Support Color | 16.7M | Light Source | Light Emitting Diode (LED), 10 LEDs (2in1) ; 5 series 2 strings |
| Weight | 17.0g (Typ.) | Designed For | HDM VR AR |
| Frame Rate | 90Hz | Touch Panel | Optional |
| Interface Type | MIPI-DSI Video mode with data compression (4-Lane x 1-Port) | ||
| Power Supply | 1.8/5.7/-5.7V (Typ.)(VDDI/AVDD/AVEE) | ||
| Environment | Storage Temp.: -20 ~ 70 °C Operating Temp.: -10 ~ 55 °C | ||
Outline Dimension (unit: mm)
Application scenarios
General Precautions
P.1 Use Restriction
This product is not authorized for use in life supporting systems,
aircraft navigation control systems, military systems and any other
application where performance failure could be life-threatening or
otherwise catastrophic.
P.2 Handling Precaution
(1) Please mount LCD module by using mounting holes arranged in
four corners tightly.
(2) Do not disassemble or modify the module. It may damage
sensitive parts inside LCD module, and may cause scratches or dust
on the display. IVO does not warrant the module, if customers
disassemble or modify the module.
(3) If LCD panel is broken and liquid crystal spills out, do not
ingest or inhale liquid Crystal, and do not contact liquid crystal
with skin. If liquid crystal contacts mouth or eyes, rinse out with
water immediately. If liquid crystal contacts skin or cloths, wash
it off immediately with alcohol and Rinse thoroughly with water.
(4) Disconnect power supply before handling LCD module
(5) Refrain from strong mechanical shock and /or any force to the
module.
(6) Do not exceed the absolute maximum rating values, such as the
supply voltage variation, input voltage variation, variation in
parts’ parameters, environmental temperature; etc otherwise LCD
module may be damaged. It’s recommended employing protection
circuit for power supply.
(7) Do not touch, push or rub the polarizer with anything harder
than HB pencil lead. Use fingerstalls of soft gloves in order to
keep clean display quality, when Persons handle the LCD module for
incoming inspection or assembly.
(8) When the surface is dusty, please wipe gently with absorbent
cotton or other soft Material. When cleaning the adhesives, please
use absorbent cotton wetted with a little Petroleum benzene or
other adequate solvent.
(9) Wipe off saliva or water drops as soon as possible. If saliva
or water drops Contact with polarizer for a long time, they may
causes deformation or color Fading.
(10) Protection film must remove very slowly from the surface of
LCD module to Prevent from electrostatic occurrence.
(11) Because LCD module uses CMOS-IC on circuit board and TFT-LCD
panel, it is Very weak to electrostatic discharge, Please be
careful with electrostatic Discharge .Persons who handle the module
should be grounded through adequate methods.
(12) Do not adjust the variable resistor located on the module.
P.3 Storage Precaution
(1) Please do not leave LCD module in the environment of high
humidity and high temperature for a long time.
(2) The module shall not be exposed under strong light such as
direct sunlight.Otherwise, Display characteristics may be changed.
(3) The module should be stored in a dark place. It is prohibited
to apply sunlight or fluorescent light in storage.
P.4 Operation Precaution
(1) Do not connect or disconnect the module in the "Power On”
condition.
(2) Power supply should always be turned on/off by "Power On/Off
Sequence"
(3) Module has high frequency circuits. Sufficient suppression to
the electromagnetic interference should be done by system
manufacturers. Grounding and shielding methods may be important to
minimize the interference.
(4) After installation of the TFT Module into an enclosure, do not
twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside.
Otherwise the TFT Module may be damaged.
P.5 Others
(1) Ultra-violet ray filter is necessary for outdoor operation.
(2) Avoid condensation of water which may result in improper
operation or disconnection of electrode.
(3) If the module keeps displaying the same pattern for a long
period of time, the image may be "sticked" to the screen.
(4) This module has its circuitry PCB's on the rear side and should
be handled carefully in order not to be stressed.
P.6 Disposal
When disposing LCD module, obey the local environmental
regulations.
3.5 Inch Mipi Interface TFT Display module 320x480 industrial touch display
Inquiry Cart
0