Airless Spinner Hanger Hook Type Shot Blast Machine 2 Shot Blasters

Airless Hanger Spinner Hanger Hook Type Shot Blast Machine Hot Sale

Steel Parts Overhead Hanger Hook Type Shot Blasting Machine description

This equipment is mainly used for shot blasting of structural parts, deburring and homogenization of die castings or hardening of dynamic stress parts. The hook type shot blasting machine is divided into single hook and double hook. The hook type shot blasting machine uses two hooks to load workpieces into the shot blasting room alternately. Use a shot blaster to throw 0.1~1.5mm projectiles to the surface of the workpiece to make the surface of the workpiece reach a certain roughness, make the workpiece beautiful, or change the compressive stress of the workpiece to increase the life. This model is widely used in the surface cleaning or strengthening treatment of medium and small castings and forgings in the industries of gears, gear shafts, forging, casting, construction, chemicals, motors, machine tools, etc., such as descaling, burrs, sand castings, etc. . And this model is suitable for cleaning slender and thin-walled parts that are not suitable for collision. The hook type shot blasting machine is the standard model of the shot blasting machine. The rotating diameter of the shot blasting chamber is from 1000 to 3000 mm, and the height is from 1200 to 3000 mm. The standard model has 2-7 blasting heads and the load capacity is up to 10,000 kg. The production efficiency of this shot blasting machine is quite high, and the flexibility span is quite large. It is an ideal cleaning and strengthening equipment, and it is easy to operate. Just load the workpiece to be processed on the machine, press the start button, and go through a very In a short time (usually 5-7 minutes), the entire cleaning process is completed and all dust and residual shots are removed. It is mainly suitable for the surface treatment of various medium and large castings, forgings, weldments, and heat-treated parts, including Fragile and irregularly shaped workpieces.

Technical data

Application

The hook type shot blasting machine uses a high-speed rotating impeller to throw small steel shots or small iron shots out to hit the surface of the part at a high speed, so the oxide layer on the surface of the part can be removed. At the same time, steel shot or iron shot hits the surface of the part at a high speed, causing the lattice distortion and deformation of the surface of the part, which increases the surface hardness. It is a method of cleaning the surface of the part. Shot blasting is often used to clean the surface of the casting or strengthen the surface of the part. deal with.

Composition

The hook type shot blasting machine is a hook type cleaning equipment. It consists of a shot blasting room, a hoist, a separator, a screw conveyor, two shot blasting assemblies, a projectile control system, a hook walking track, and a hook system , Self-rotating device, foundation, dust removal system and electrical control part.

Advantages

1. The international fourth-generation cantilever centrifugal shot blasting machine with large shot blasting volume and high ejection speed can significantly improve cleaning efficiency. Obtain satisfactory cleaning quality. 2. The simulated projectile drawing (including the determination of the model, number and spatial arrangement of the shot blasting machine, etc.) and all drawings of the shot blasting machine are complete With computer aided design (CAD) drawing, the selection and layout of the shot blasting device is more reasonable. Improved the utilization rate and labor The dynamic productivity ensures the cleaning effect and reduces the abrasion of the chamber body guard. 3. Adopting the popular non-pit structure, which not only saves the construction cost and time of the pit foundation, but also solves the problem of southern The problem of corrosion and agglomeration of shot sand in the hoist caused by water in the pit. 4. Clean the indoor hot zone using rolled Mn13 plate protection, compared with the previous rubber plate protection, its service life is greatly improved, and Beautiful appearance and easy to replace, it is the most popular way of cleaning machine room protection.

Our company

Qingdao KNNJOO machine Inc. is the subsidiary corporation of joint venture set up by Qingdao foundry machine CO.,LTD. and taiwan APC company, the company is mainly manufacture advanced shot blasting machine, shot blasting equipment and foundry machine. The company introduct and develop more than one hundred kinds of shot blasting machine and shot peening machine, more than 20 products filling a domestic gap in this field, the products applied to many well-known enterprises such as Thyssen Krupp, SIEMENS, FAW-Volkswagen, Cummins engine, Dongfeng Automobile and so on.

The company get the international ISO9001 certificate, Germany TUV certificate, EU CE certificate, France BV certificate at the earliest in the domestic casting machine industry. and the company was the first to make the right of the import and export, the company introduce and optimize the technology of Germany AGTOS, United States PANBORN, England SPENCER,WHEELABRATOR,DISA, it improve product performance, replace outdated technology, and get the affirmation of the new and old users of domestic and foreign around the world.

QINGDAO KNNJOO MACHINE INC. was founded in 2006. Located in the beautiful coastal city, Qingdao. We are a national high-tech enterprise. We mainly produce high-end shot blasting machine, sand blasting room , foundry equipment, dust collector etc. Over the years, we have been insisting on customer-centered, quality and technology-oriented, and devote ourselves to becoming the leading enterprise of Asia's high-end shot blasting machine manufacturing.

We have obtained international I S O 9 0 0 1, German T U V , European Union C E certificates and 24 national invention patents and 8 software copyrights related to shot blasting machine. After years of development, our company's various indicators ranked the forefront of the national shot blasting machine industry for many years.

Our products are exported to 49 countries in the world, such countries and regions as Spain, USA, France, United Kingdom, Korea, Japan, Germany, Australia, Russia, Vietnam and so on, and enjoying a high reputation and public praise at home and abroad.

With the rapid progress of global integration, the company has proposed a new development concept of “building a three-dimensional win-win system and creating global leading quality”, strictly controlling quality and process requirements in management, and striving to grow into a world-renowned enterprise.

We provide perfect services, high-quality products and competitive prices for our customers. Warmly welcome domestic and foreign customers to cooperate with us to achieve common success.

WHY CHOOSE US ?

Customer Above Everything

• We are a national high-tech enterprise.

• 3 national invention patents.

• 24 utility model patents.

• 22 software copyright certificates.

• We have obtained I S O 9 0 0 1,T U V, C E, BV certificates.

• Our engineers with more than 20 years of experience will provide the right solution for you.

• Products are exported to 49 countries worldwide, including Spain, the United States, France, the United Kingdom, South Korea, Japan, Germany, Australia, Russia, etc

• Engineers available to install and debug equipment and provide training services.

Loading Site