

Add to Cart
Waist High Sliding 600mm Width Automatic Turnstiles Pedestrian Access Control
Waist High Automatic Stainless Steel Sliding Swing Barrier Speed Turnstile Gate For Pedestrian Access Control Passage
Introduction:
The Sliding Barrier Turnstile Speed Gate offer a reliable and efficient method to ensure only authorized users are allowed access to each area of a building. It is an attractive swing turnstile that is easily capable of handling high volume and abusive conditions. The compact unit makes it simple to construct a multiple lane set-up while the variety in colors allows you to match this turnstile perfectly to your lobby or branding.
Features:
1. Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Support infrared photocell for anti-pinch and reset function
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
Standard functions & features of Turnstiles Gate
1. | Auto-reposition function: After card read, passengers don‘t pass within regulated time period, turnstile will be locked automatically |
2. | Bi-direction passing or uni-direction |
3. | When power off, arm will be dropped automatically |
4. | Self-lock function: arm will be locked automatically after passenger passing |
5. | LED passing arrow can show direction to indicate passenger to pass |
6. | Standard interfaces are convenient for connection with different readers which can send relay signal |
7. | RS485 interfaces can connect turnstile with computer directly |
8. | Stable running with little noise. |
PRODUCT INFORMATION | |
Model | BS-PB200 |
Brand | BESTER |
Size/Stick length | 500*120*1000(mm) |
Arm length | 375mm |
Material | SUS304 thickness(1.5mm) |
Input Voltage | AC110-220±10%,50HZ60HZ |
Driving motor | 24V |
Failure-free operation | 10 million/time |
Weight | 60kg |
Traffic speed | 35-40 persons/min |
Opening/Closing Time | 1-3S |
Channel width | 800-1000mm |
Operating temperature | -30ºC-+70ºC |
Communication interface | RS485/TCP/IP |
Working environment | indoor and outdoor |