Protective Clothing and Masks Leakage Tester GT-RA08A

Application:

To test protective clothing against solid airborne particles including radioactive contamination.

The machine use “inward leakage in %”, ratio of the concentration of contaminant in the ambient atmosphere to the concentration of the contaminant in the suit, to evaluate the quality of protective clothing.

Standards:
GB/T 29511-2013 Protective clothing- Chemical protective clothing against solid particulates4.3.1, Annex A
GB 2626-2019Respiratory protection—Non-powered air-purifying particle respirator 6.4
GB 19083-2010Technical requirements for protective face mask for medical use ANNEX B
ISO 13982,
BS EN ISO 13982 ,
EN149,
EN 1073-1-2016

A standard aerosol of sodium chloride particles is generated inside a test chamber in which a test subject, wearing the protective suit under test, carries out a predetermined sequence of test exercises. The inward leakage at each sampling position inside the suit is measured by means of flame photometry.We use following indicator to judge the quality of protective clothing.
- Lijimn: inward leakage for a given test subject (i),suit(j),exercise (m) and sampling position (n)
- Cijmn: concentration of aerosol measured at the sampling point inside the suit for a give test subject(i), suit(j(, exercise(m) and sampling position(n)
- LS: total inward leakage per suit (average over all exercises and sampling positions)
- LH: total inward leakage per human test subject (average over all exercises, sampling positions and suits worn by that test subject)
- LE: total inward leakage per exercise (average over all suits and sampling positions)
- Lp: total inward leakage per sampling position (average over all suits and exercises)
- LEP: total inward leakage per sampling position and per exercise (average over all suits)

- : mean total inward leakage (average over all test subjects, suits, exercises and sampling positions)

Controlling & Analysis system

1.Protective Clothing Against Solid Airborne Particles Tester Central control console, computer programmed control, prompting experiment process;

2.Monitoring test data automatically, calculating individual test inward leakage rate, total inward leakage rate, average inward leakage automatically, output testing result in various way.

Gester Instruments Co.,LTD is professionally engaged in production and R&D of physical properties testing equipment. With more than 20 years experience in research and development,we specialize in providing the total solutions of Toys and Baby Stuff Testing Equipment, Textiles & Garments Testing Equipment, Footwear Testing Equipment, Protective and Mask Testing Equipment.

Our main products include:

1. Textile Testing Equipment

Included: Abrasion, Pilling, Tensile , Fastness ,Tearing ,Bursting and Flammability Tester.

2. Footwear Testing Equipment

Included: Rubber Tester, Leather Tester, Sole Tester, Shoelace Tester, Insole Tester, Shoe Tester.

3. Children Products Testing Equipment

Included: Toys Tester, Baby carrier Tester, Baby Stroller Tester.

4. Universal Testing Machines

Included: Temperature & Humidity Chamber, Salt Spray Tester and Tensile Strength Testing Machine.

5.Protective and Mask Testing Equipment

Included: Synthetic Blood Penetration Tester, BFE Tester, Face Mask Differential Pressure Tester, Protective Clothing Tester, Protective clothing blood penetration tester etc.

6.Mask Production Line
Included: Fully Automatic non woven Face Mask Making Machine, semi automatic face mask making machine, n95 face mask making machine.

GESTER is ISO 9001 certified, we has became the SGS audited supplier and cooperate with many International Standard Organizations. As the customers requirements, we can offer the CE, ISO 17025, CNAS Calibration Certificates and so on. We’ve built the long-term relationship with the large international third party giants, such as SGS , BV, TUV and Intertek. Also, we have passed the supplier audit of Apple in the United States，BATA , IKEA and become their testers supplier. Excellence in quality and top-grade after sales service helps GESTER been recognized by our customers.

We have been adopting the world standards and regulations such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,TAPPI, AATCC, IEC, VDE, and CSA. To ensure the accuracy and authority of testing results, all the products must been calibrated by professionals from the central laboratory ex-factory.

GESTER is determined to become the best tester supplier in China. The CAGR of whole sales exceeds 50% for nearly three years. We will insist the principle of Innovation, Exploitation and Enterprising, keep on improving our design level , developing and refreshing our products. We depend on higher quality, better sales and after sales service to serve our customers, our persistent effort will helps us to win the favor of the whole world and become the No.1 in China.