C1216 HID Xenon Ballast

C1216 CANBUS & Fast Start Ballast
12MM Ultra Thin HID ballast
Combining CANBUS and Fast bright perfectly
Specifically Mounting Bracket
1. Unique design, push&stick, easy installation.
2. More efficient cross-ventilation cooling by the bracket design.
3. Good quality 3M sticker on back.

ASIC (Application Specific Integrated Circuit)
1. Highly integrated, more efficient and stable.
2. Low voltage start:V-start of chip:7-7.3V,ballast starts at 8.5V.
3. High frequency ±300Hz(≤250Hz/other ballasts).
4. FSW(frequency switch)=150KHz,combining Canbus and Fast
Bright perfectly.
5. Pass flashing test(max 4 times/second),no flicker or off.

Solid State PCB Based On ASIC
1. Only 70+ components, more simple & efficient.
2. All SMD components, lower defective rate.
3. 4 layers PCB, better circuirt layout.
21000UF Super CANBUS Decoder
The following cars usually have CANBUS problems, but working
well with C1216 HID ballast.BMW-320Li,MINI,X1 BENZC200,VW-Tiguan,Sagitar, Lavida, Buick-Envision, KIA-K3,JEEPCAMPASS,FORD-FOCUS,etc…

CONSTANT Power Output
Precisely constant power output by checking the current and voltage of loaded bulbs. Tolerance is ±0.2W,better
then any other ballasts

EMC/EMI,ANTI-INTERFERENCE
1. Low impulse current wave,stable current.
2. Copper+PET package input&output wires.
3. Solving radio interference problem, etc...

START VOLTAGE:23000V±3000V
1. Fast full bright and strong lighting.
2. Normally 17000V for some others'ballasts.
3. Good components:long life,more brightness.

CURRENT TEST (13.5V)
C1216 CANBUS:5.5A(I-start),4.2A(I-op),
C1216 Fast Start:7.5A(I-start),4.2A(I-op).

Low Start Impulse
1. Current 54.4A/2.50ms,
2. Lighting up stable, no flicker,
3. Even DSP dual-core balalst reaches 60A+

More FEATURES
1. Main chip: ASIC, highly integrated, more efficient and stable
2. POWER-out(total): 55W±2W, perfectly match original 55W HID bulbs, POWER-out(effective): 42W±2W, work well
with 35W HID bulbs,
3. Fast response: FSW(frequency switch)=150KHZ, strong I-start 5.5A&13.5V, C1216 combining CANBUS and FAST
BRIGHT together,
4. Strong CANBUS: solve most BMW, BENZ, AUDI, VW etc,
5. Low voltage start: light up at 8.5V, no flicker, remain lighting at 7.5V when driving.(other suppliers canbus ballasts can't
light up or flicker at such low start current, and flicker or light off at 7.5V when driving)
6. Ultra/super thin/slim design, heights of components≤9mm, height of ballast=12mm.
7. High frequency: ±300Hz(≥250Hz/other suppliers), stable, better protection for electrode of bulbs.
8. Few components: only 70+ pcs(>110pcs/other suppliers), more stable, reducing defective rates.
9. EMC/EMI: strong anti-interference, totally solving electric devices interference problems, such as audio-interference.
10. Copper+PET material package for input and output wires, high level quality, strong electromagnetic interference
shielding function.
11. All components are SMD types, lower defective rate, more stable, longer life span 5000+ hrs
12. Components upgrade:
A Input “filter inductor” changed into “shielded SMD inductor”.
B “electrolytic capacitors” changed into “SMD ceramic capacitors”, longer life span(5000 hrs/electrolytic capacitors,
30,000+ hrs/ceramic capacitors).
C “polyester capacitors” changed into “SMD ceramic capacitors”, longer life span(20,000+ hrs/electrolytic capacitors,
30,000+ hrs/ceramic capacitors)
D Main chips “Dual-Core chips” changed into “ASIC chip”. Faster response, more stable, highly integrated.
E MOSFET upgraded, the value of permissible voltage up 100V, internal resistance down 20%-30%.
13. More stable of fast start and light up, no flicker or shaking.
14. Strong self-adjustment function when starting, ensuring lighting up successfully at one time for all different brands and
quality HID bulbs.
15. Supporting fast flashing test, max 4times/second, no lighting off when flashing test.
16. Precisely constant power output reaches ±0.2W, by checking the current and voltage of loaded bulbs.
17. Cold/Hot testing system, automatically controlling constant starting current according to different tubes’ temperature.
18. Strong self-protection function: lack voltage-input protection, over voltage-input protection, output open circuit
protection, short circuit protection, etc.
19. Ultimate temperature design: lighting up at one time at -40℃, working stably at +85℃.
20. Aging temperature: working temperature is 65-70℃(80℃+/other suppliers) at 30℃ ambient temperature
21. Heat dissipation: contacts matches well between inner cover and components, such as MOSFETs, main chips, etc.
22. Bracket: special design, ventilative for better cooling down, easy installation by pushing in.
23. Ground connection design is safer

C1216 CANBUS+FAST BRIGHT
1. I-start 5.5A, 50% bright/2second, 100% bright/5second,
2. Strong CANBUS function
C1216 FAST START:
I-start 7.5A, 50% bright/1second, 100% bright/3second, pecfect performance if working with customized "YEAKY" bulbs or
Cnlight which are specially made for our C1216 ballast.

FUNCTIONS
CANBUS: Super Strong canbus function
Pass Jeep Compass, Buick lacrosse 2012, Buick-Envision, KIA-K3(Those cars are very hard to pass, and many normal
Pass BMW E39, E46, E60, E90, E92, E93, F10, F11, F12, Mini, BMW 320LI, BMW X1;
Pass AUDI A3, A4, A6;
Pass VW Tiguan 2010, VW Sagitar 2014, VW-Laivda, ;
Pass BENZ C-200 2010, VOLVO, DODGE, FORD focus-2013.



Warranty & Return
1. We are honest supplier, we sure each item was tested before shipping, werespect every client, hope can get your respect at the same time.
2. lf product confirm that is manufacturer defect ,we will send the brand newreplacement bulb to you without any extra fee within б months ;After 6 monthsthe new replacement bulb still can be got ,but need you pay the shipping costs.
3. All led bulbs have 12 months warranty from our store.If meet any problem whenyou received it ,please feel free to contact us.

Shipping Details
1. We will ship out the parcel within 2 business days once your payment has beenconfirm by Aliexpress.
2. In most countries, you can get the items within 7 to 20 business days .Somecountries such as Russia Brazil ,or some European countries may take up to30 to 45business days or longer for delivery.
3. lf you didn't received your shipment within 60 days from delivery ,please contactus. We will track the shipment and reply you as soon as possible.
Payment
1. We accept all payment methods that listed by Aliexpress
2. Before placing your order , please confirm details with us if you have request onitems
3. We will deliver the goods to you according to the address that you wrote onAliexpress. lf you want to change, please cancel the old order and place it again forthe new address .
4. Import taxes or duties are not included in the item price, buyers are responsiblefor any duty/ taxes charged by their local customs. To ensure that the item are taxfree upon import, we will declare it as a Gift if possible ,and Each parcel will bedeclared value $5,if you need us in a lower declare value, please leave us amessage in the order.

Guangzhou Lumileds is a manufacturer that provides innovative ideas, quality products and exceptional service to a wide range of consumer product marketers, retailers and distributors.

At Guangzhou Lumileds, our goal is to be a factory which design for safety for car owners. From concept to shipment, we work carefully and take special care to every detail to make sure our customer get the product they are looking for. Our rich experience on auto lighting enable us to meet the custom requirements flexibly and ensure the good timelines in delivery. Our staff take the concept of customer-first into our daily work, thinking about what customers think and pressing client's urgent needs. That's why we have established a long term partnership with many of our customers.

Guangzhou Lumileds is the leader of auto lighting in China, more than 1700 square meters of ISO 9001 & 14001 factory building, All of products are passed E-MARK and DOT authentication and 100% fit for original car standard. We have 2 professional auto lighting designer, and at the same time, we set up marketing and research & department in Europe and Korea, Keep Lumileds products design in the leading level. In production line, more than 100 workers for producing LED DRL, LED headlight bulb and HID products, All products are domestic and international industry standards and strict implementation of ISO quality management system for 100% quality control.

CNLM mission is designing and Manufacturing Environmental and Safety auto lamp for Global Owners.