

Add to Cart
Uninterupted power source|portable inverter for laptop|outdoor camping energy storage power supply
UPS (Uninterrupted Power Supply), that is, uninterrupted power supply,
connects the battery with the host, and converts the DC (Direct
Current) power in the battery into AC (Alternating Current) through
the host inverter and other module circuits. ) Electrical system
equipment. UPS is mainly used to provide a stable and uninterrupted
power supply to a single computer, computer network system or other
power electronic equipment such as solenoid valves, pressure
transmitters, etc.
When the mains input is normal, the UPS will stabilize the mains
and supply it to the load. At this time, the UPS is an AC-type
voltage stabilizer, and it also charges the battery in the machine;
when the mains is interrupted (accidental power failure) When the
time, the UPS immediately converts the DC power of the battery
through the inverter switching method to continue to supply 220V AC
to the load to maintain the normal operation of the load and
protect the software and hardware of the load from damage. In
addition, UPS equipment usually provides protection against
over-voltage or under-voltage. Uninterupted power source
Model no. GZ-2021503 | |||||
Dimensions 200*46*146mm | |||||
Output voltage 110-240V | |||||
Weight 1.5KG | |||||
Built-in battery cell 100% high quality lithium batter cells | |||||
Charging power DC 15V-2A | |||||
Charging time About 6-7 hours | |||||
USB output USB1+USB2 5V-3.1A(Max) USB3+USB4 5V-3. 1A(Max) | |||||
DC power DC 9-12.6V/10A(Max) | |||||
AC output AC 110V /60H or 230V/50Hz Pure sine wave output(IMPORTANT! AC output is customized according to different countries. areas. Please refer to the actual product. | |||||
AC power AC continuous power output: 200W Peak power output: 250W | |||||
Power indicator LED indicator light | |||||
Working temperature 20°C~60°C | |||||
Circle life >1000 times | |||||
Accessories 1 x portable power bank 1 x home charger 1 x instruction manual | |||||
Advantages of portable power inverter with rechargeable battery
Each of our products is designed with a fault light signal, when
the product has a problem, the fault light will light up;
Second, each of our products is designed to be individually
controlled by the AC switch. When the AC part is to be used, the AC
switch needs to be turned on before it can be used. In order to
prevent the main switch from accidentally touching the high AC
voltage and avoid electric shock;
Third, each of our products has designed a fault light signal, when
the product has a problem, the fault light will light up;
Fourth, each of our products has short-circuit protection. When the
product is short-circuited, the red light will be on, and the
short-circuit device will be automatically restored after 5S;
Fifth, each of our products has overload protection. When the
product with super power is used, the red light will be on, and it
will automatically recover after being pulled out for 5S.
Sixth, each of our products has over-temperature protection. When
the temperature of the product becomes higher, it will
automatically protect it, and it will automatically recover when
the temperature drops to 45 degrees;