

Add to Cart
Uninterupted power source |portable power inverter for camping |power inverter 220w
pure sine wave power inverter camper inverter pure sine wave inverter for sale inverter for computer
UPS uninterruptible power supply is a system equipment that connects the battery with the host and converts DC power into mains power through the host inverter and other module circuits. It is mainly used to provide a stable and uninterrupted power supply to a single computer, computer network system or other power electronic equipment such as solenoid valves, pressure transmitters, etc.
Pure sine wave output
High-precision circuit board design, providing stable and efficient
pure power supply, quality assurance, strong grid adaptability, no
damage to the motor
Uninterruptible power supply|portable inverter for camping|car inverter
Strong environmental adaptability
Wide voltage input range to avoid frequent switching to battery
power
The input frequency range is large, and it can work stably when
connected with various fuel generators
Comprehensive and reliable protection
Output overload, output short circuit, inverter overheating,
battery undervoltage warning and battery overcharge protection
function
Static electronic bypass switch
DC start function
1~3KVA model has input zero line detection function
Intelligent fan speed control design, extend fan life and save
energy
Quick Details | |||||
Place of Origin GZ-2021507 | |||||
Brand Name: kenergy | |||||
Protection Short Circuit | |||||
Phase: Single Phase | |||||
Type On-line | |||||
Wave Form Sinusoidal | |||||
Display: LCD | |||||
Overload capability 102% ~ 110% for 10 min, 110% ~ 125% for 1 min,125% ~ 150 | |||||
Efficiency ≥ 94% at 100% load, max. 95% at 60% load; ≥ 98% in ECO mode | |||||
Capacity 220W/H | |||||
LWH Dimension 200×200x80mm | |||||
Weight About2. 3KG | |||||
Built-in battery cell 100% high quality lithium batter cells | |||||
Charging power DC15V/2.5A | |||||
Charging time 8hours | |||||
USB output: USB1+USB2 5V-3. 1A(Max) USB3+USB4 5V-3.1A(Max) | |||||
DC power: DC 9-12.6V/10A(Max) | |||||
AC output AC 110V /60H or 230V/50Hz Pure sine wave output(IMPORTANT! AC output is customized according to different countries. areas. Please refer to the actual product. | |||||
Power indicator LED indicator light | |||||
Working temperature 20°C~60°C | |||||
Circle life >1000 times | |||||
Accessories 1 x portable power bank 1 x home charger 1x instruction manual |
extending the service life of battery
Dual-input design, supporting independent bypass
Output power factor improved from 0.9 to 1, load capacityincreased
by 13%
Flexible battery configuration (settable 16 - 20 pcs batteries)
Charging voltage and current configured by demands
Ability to switch on the UPS with batteries
Settable delayed start time when mains power is restored, reducing
the impact on power grid or generator
Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60
Hz input / 50 Hz output
High Intelligence
Advanced multi-platform communications: RS232, USB, RS485, SNMP and
dry contacts communication interfaces
Intelligent battery management, automatic floating / equalizing
charge control, charger dormancy control, increasing battery life
by 50%
Energy Conservation and Environment Protection
Active power factor correction (APFC), input power factor up to
0.99
High efficiency 95% (up to 98% in ECO mode)
Equipped with self-aging function
Precautions
(1) The operating environment of the UPS should be well ventilated
to facilitate heat dissipation and keep the environment clean.
(2) Do not carry inductive loads such as money counters,
fluorescent lights, air conditioners, etc., to avoid damage.
(3) The output load control of UPS is about 60%, which is the best
and the reliability is the highest.
(4) If the UPS load is too light (such as 1000VA UPS and 100VA
load), it may cause deep discharge of the battery, which will
reduce the service life of the battery and should be avoided as
much as possible.
(5) Proper discharge helps to activate the battery. If the power
supply has not been interrupted for a long time, the power supply
should be cut off manually every three months. The UPS should be
discharged with a load, which can prolong the service life of the
battery.
(6) The UPS should be charged in time after discharge to avoid
damage to the battery due to excessive self-discharge.