ANSI ML15AL M10 to M25 Seismic Wedge Anchors

Shear Connector Weld Studs are unthreaded with an upset head. Designed to interconnect the concrete slab to the load bearing steel beams. Because of the inter connection or composite construction resists shear loading between the concrete and steel beams. Meets with AWS and all other applicable specifications. Used in all types of concrete connections. They can be welded to flat or vertical surfaces, or to the inside or outside of an angle.

Material – Low carbon steel, ASTM A29, 1010-1020. Also available in a weldable stainless steel. Type 302 is the most commonly used. Other grades available on request. Please contact us for your specific needs.

Length: Length listed is before weld. Stud diameters less than 5/8” will be approximately 1/8” shorter after weld – Stud diameters 5/8” – 3/4” will be approximately 3/16” shorter – Stud diameters 1” will be approximately 1/4” shorter after weld.

Shear Connector Mechanical Properties

Process flow

Cold forging

Annealing treatment ➨ wiredrawing ➨ clod forging ➨ make welding spot ➨ Packing

Materials and Chemical compstition

ML15A

ML18A

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

The advantages of QBH

• QBH brand sales to the main quality assurance.
• Years of export trade management, excellent service, word-of-mouth guarantee.
• By working with TUV,escort for quality.
• Customization of non-standard parts can be made according to customer's requirements and drawings.
• For quality customers,we can provide a certain credit period.

What Are Shear Studs?

Definition of Shear Studs in Construction

Shear studs refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the shear studs are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the shear stud directly to the top of the steel beam.

The purpose of the shear stud is to provide a structural connection between the poured in place concrete slab and the structural steel. This structural connection distributes any shear forces that the structure may incur. Without the shear studs in place, there is a slip plane between the concrete slab, the metal deck and the structural steel framework of the project. The structural engineer will determine, which beams will have the shear studs, the size of the studs as well as the number of studs to be installed. There are specialized subcontractors that will install the shear studs. The test for the shear studs integrity is simply striking the side of the shear stud with an iron mallet. This will ensure that the stud has been properly welded to the beam, if not, the stud will simply break off at the point of intersection with the steel beam. The stud will have failed due to a shear force.

PRODUCT APPLICATIONS AND ENGINEERING CASES

Jiaxing City Qunbang Hardware Co,ltd is a productiondesignsales and after-sales as one of the fasteners business,The company is located in HangjiaHu Plain,close to ShanghaiNingboZhapu ports.The geographical position is superior,the transportation is convenient,has created the natural superiority for the export.

The company mainly produces high-strength fasteners business, bolts and nuts are the main,the main standard are DIN/ANSIASME/JIS/UNI/ISO/AS/BS/GB and so on.The product massively applies in the bridgeroadthe petroleum pipeline facilitythe wind power generation and steel structure project. Carbon steel bolts mainly have 4.8、5.8、6.8、8.8、10.9、12.9,nuts mainly have 4、6、8、10,the main material of stainless steel fastener is 201304316.QBH from its establishment to he present,after ten years of development,it is equipped with perfect testing equipment,and SGS and TUV have a good cooperation,each batch of products is accompanied by a 3.1 or 3.2 certificate,further escort the quality of the company.

In 2017,we registered the trademark “QBH” in the CHINA、EU、United States,and has six fastener product patents,has obtained the Zhejiang Province science and technology small and medium-sized enterprise certificate as well as the ISO9001:2000 cerfiticate.With the continuous development and expansion of the company,as well as customer demand for product diversification,on the basis of its original production,in order to further enhance the potential for cooperation with customers,as well as to provide competitive prices.Starting in 2015,QBH has taken part in several fastener enterprises one after another,the product variety is more abundant and the price is more advantageous,and the quality can also be well controlled. QBH has always been to provide customers with efficient and convenient service and quality products,and create a pleasant trading process for customers for the mission,deeply participate in customer construction projects and make progress together with customers,this means that we need to provide better and more cost-effictive solutions,so as to help customers stand out from the competition.

QBH promises to always provide you with excellent quality,efficient service and very competitive prices.We believe that the cooperation between us is not only based on business,but also hope that we can open new markets on the basis of win-win situation.And thank all the customers in the past to give us great support and help,make us grow up gradually,at the same time also hope that in the nere future,and you can establish new business relations.