Mullite High Alumina Insulating Brick Kilns Refractory Fire Brick Heat Insulation

Mullite High Alumina Insulating Brick Kilns Refractory Fire Brick Heat Insulation For HBS

Definition:

Mullite High Alumina Insulating Brick Kilns Refractory Fire Brick Heat Insulation For HBS is also called high alumina insulating brick. It contains more than 48% Al2O3 and mainly consists of mullite and glass phase or corundum. It is usually made of high bauxite and a small amount of clay. After the raw materials are grounded, it is made into mud. Then it is cast and molded and fired at 1300~1500℃. Sometimes industrial alumimum is used to replace bauxite. Inorganic matter is added as ignition loss substance in order to increase the porosity of the refractory.

Mullite High Alumina Insulating Brick Kilns Refractory Fire Brick Heat Insulation For HBS is an ideal insulating refractory refractory material, with advantages of high strength, low thermal conductivity, good insulation property and low price. For various industrial kilns & furnaces, it is a kind of essential refractory for energy saving and temperature preservation.

Advantage:

1. It has advantages with small bulk density, high cold crushing strength, and high refractoriness under load, small dimension tolerance and good thermal shock resistance.
2. It has the lowest and most stable thermal conductivity in various insulating refractory bricks.
3. It can reduce the total weight of furnace body and the thickness of furnace wall effectively, improve heat efficiency, lower energy consumption, improve work conditions and production efficiency, and considerable economic benefit can be obtained.

Application:

Mullite High Alumina Insulating Brick Kilns Refractory Fire Brick Heat Insulation For HBS ,also know as high alumina insulation brick. The lining and the heat insulation layer of the kiln ,and the part of the erosion of the material without strong high temperature meiting .The surface contact temperature shall not be higher than 1350℃.
High qulity high alumina bricks can be used in direct contact with the flame of the furnace lining ,but should not be used directly by slay erosion occasions.

Product Description:

What you will get from us is our best profession in service and the hospitality that you are willing to become our Friend.

So choosing us is the right choice for you. If you are interested in our products or if you have any question, pls feel free to contact us at any time. We will reply as soon as possible.

Zhengzhou ANNEC Industrial CO., Ltd. was founded at Sep, 2003, and has been a NASDAQ listed corporation since 2011(Stock code: ANNC). ANNEC had become refractory industrial leader provide core service such as refractory production, technology of blast furnace and hot blast stove and EPC contract project in China. Now ANNEC sets up Academician workstations, the Provincial Engineering and Technology Center, Hot Blast Stove Research Centre, ANNEC (Beijing) Engineering Technology Co., Ltd and four production sites as subsidiaries. Yearly refractory output is 150 kt.

ANNEC is a national hi-tech company, and is accredited with ISO9001:2008 quality control system standards, ISO12001:2004 environmental control system standards, and GB/T28001-2011 HAZOPS. ANNEC has set up a thorough and effective management system with practical considerations for her employees and community, and is persistent in promoting employee self-value and product products. Based on the efforts, ANNEC is the recipient of the prestigious 2012 Zhengzhou Mayor Quality Prize.

ANNEC has capability of manufacturing refractories materials of fireclay, high alumina, silica and insulating bricks and corresponding unshaped refractories for hot blast stove. Meanwhile, ANNEC also produce various refractories for coking, sintering, casting house, torpedoes, iron ladles and steel ladles. ANNEC’s products have been sold to America, Japan, Korea, India, Iran, Vietnam, Turkey, Malaysia and Indonesia; get the customer's endorsement in the domestic and world. At the same time, ANNEC’s testing center shoulder examinations of products quality and tests of new product development.

ANNEC has been providing matched refractories of different type HBS for CERI, CISDI, WISDRI, CSGI and Kalugin，P•W，Danieli and SIEMENS VAI in their worldwide projects. ANNEC is awarded as excellent supplier by Baosteel, CSGI, and MCC etc.

ANNEC owns more than 50 patent technologies which include checker bricks with19 holes; 37 holes, 61 holes, ceramic burner of swirl-cutting top combustion hot blast stove, cone-column composited ceramic burner for top combustion hot blast stove, symmetric layout structure of hot blast stove, three section hot blast stove with independent structural. ANNEC was authorized to fulfill editing 7 standards of national and of industrial, including 《Silica Brick》, 《High Alumina Brick》， 《Refractory Brick for HBS Ceramic Burner》,《Refractory Standard Configuration of HBS System 》 and 《Energy Saving Technical Specification of Top Combustion HBS》.

ANNEC successively get awards such as “Chinese Outstanding S&T Innovation Enterprise”、“AAA grade Credit Enterprise”“Chinese Famous Brand Trademark China” “Provincial Famous-brand Product, Henan”“Provincial Credit Enterprise, Henan” “Zhengzhou Environmental Enterprise”

ANNEC owns core culture which is to make customer satisfaction, staff satisfaction and shareholder satisfaction; and continuously push forward technological development of HBS and progress of refractory technology by its great efforts, and gradually becomes one of the best professional suppliers in high temperature industry of global