Fresh Air Energy Saving 100m2 Wall Mounted ERV Unit

50W wall mounted fresh air ventilation system prevention of coronavirus PM2.5 purification energy saving

► SPECIFICATION

► CHARACTERISTIC

★ Super purification

Using electrostatic purification technology, the electrostatic dust collector generates 10000 volts high voltage, which makes the dust in the air carry electric charge. The air passing through the electrostatic dust collector is absorbed by the positive and negative plates. Through the 10000 volt negative voltage, the bacterial cell tissue is destroyed and the bacteria are completely killed. The purification efficiency of PM2.5 is as high as 99.9%

★ High efficiency and energy saving

The brushless DC motor can save more than 40% energy than AC motor, the fresh air and exhaust air share the same fan, only 0.5 kwh power is needed for 24-hour operation

★ Automatic ventilation

When the indoor air concentration is lower than the set value, the control system will start the automatic ventilation mode. When the temperature difference between indoor and outdoor is lower than the set value, the system will automatically open the bypass valve mode.

★ Wireless monitoring

Transfer the operation status to the mobile phone through Wifi directly, so that the operation of the system can be mastered anytime and anywhere.

★ Remote operation

Master the actual operation of the system through Wifi, but also through the mobile phone to achieve remote operation.

★ Intelligent mute

The unique structure design of the fresh air fan, adopts the DC brushless motor, design the large diameter wind wheel specially, the low speed, the machine does not produce any noise during operation.

★ Convenient maintenance

The fan runs at low speed and has low failure rate. Ceiling and wall mounted fresh air ventilaiton are both have one fan and two wind wheels, which is 50% less than other brand products.

★ Low carbon environmental protection

The electrostatic dust box can be repeatedly cleaned (the design service life of the dust box is 10 years), the primary efficiency and high efficiency filters can be replaced with little money, the surrounding aluminum frame can be reused, saving money and environmental protection.

► SIZE

► ADVANTAGE

★ PM2.5 removal effect diagram

solubility

minute 10 20 30 40 50 60 minute 10 20 30 40 50 60

When the machine is started for 1 hour, PM2.5 decreases by about 25 ug / m³, which is the high quality air standard, formaldehyde drops to about 0.3 mg / m³

★ Efficient filtration

Primary filter

Large filtration area and large dust capacity

The spreading area of primary filter is about 3 m³,It can filter large particles,

block mosquitoes, hair, etc.

Characteristic:

The primary filter is made of fiber cotton,It has the characteristics of large filtering area, large dust capacity, low wind speed and low resistance. The service life of the follow-up filter screen depends on this layer.

Medium efficiency filter

More than 97% of PM2.5 was filtered at one time

High efficiency filter

H13 medical grade filter screen, single filtration 99.95% PM2.5

Characteristic:

PTFE composite filter element is adopted,compared with the traditional glass fiber, PTFE filter paper will not emit chemical gas

The spreading area of primary filter is about 30 m^3,depending on the service environment, it is generally replaced within 1-2 years.

Protect the health of you and your family

Eliminating visible and invisible air pollution

Pet hair Urban waste Pollen PM2.5 Second hand Viral Formaldehyde

gas smoke bacteria

Special fan

Big wind wheel Low speed Low noise Long service life

► Fresh air and exhaust air use one brushless DC motor

► The wind wheel and impeller is designed, moulded and processed by our company.

We can control the quality effectively.

► Wind wheel is 2.5 times larger than other brands.

► It has the characteristics of high efficiency, low noise, large air volume and stable operation.

special volute big air volume DC brushless special volute

wind wheel motor

Hong Kong Chuang Sheng Electronics Co.,Ltd. is a high-tech group company engaged in R &D, production, sales and service of fresh air system. The company has mastered many cutting-edge core technologies and patents of indoor environment treatment and purification, has senior R & D team, experienced management, quality control and sales team. The factory covers an area of more than 50000 square meters, with complete automatic production line and mold processing workshop, hardware workshop, injection workshop, painting workshop; with an annual production capacity of 300000 sets.The company passed ISO9001-2000 certification and ISO14001 environmental system certification.
Our products export to America, Canada, Europe, Russia and southeast Asia.