HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP
Brand Name:NEC
Model Number:HS420AR12-9
Minimum Order Quantity:1 piece
Delivery Time:3-7 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Guangzhou Guangdong China
Address:
No. 1617,16TH Yichuang street, Jiulong Avenue, Huangpu District, Guangzhou City, Guangdong, 510700, P.R. China
Supplier`s last login times:
within 16 hours
Product Details
Company Profile
Product Details
HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new
NP42LP
HS420AR12-9 NEC projector bare lamp , all items are 100% new and pass the quality
checked. And will be packaged in good condition before dispatch.
100% Brand New, Premium quality, high brightness, long life
replacement projector lamp. Compatible for PA803U+,PA653U+,PA853W+,PA903X+,PA703W+,PA753W+
Specifications:
| Product name: | Projector Lamp |
| Model No. | HS420AR12-9 |
| Condition: | 100% Brand new |
| Type: | Compatible Bare lamp |
| Lamp power: | 420W |
| Life time : | ≥2000-5000HourS |
| Used in the these projector: | PA803U+,PA653U+,PA853W+,PA903X+,PA703W+,PA753W+ |
| Installation: | Easy installation. |
| Warranty: | All items have been QC tested and 90 days Warranty at least |
| Package: | Each lamp in a single box with foam protection. One pair gloves and instruction inside. |
If you want your Projector Lamps work longer, please Note:
1. Do not allow the projector to overheat; the primary cause of
lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after
powering down, and never move the projector during this period or
while the lamp is on. The lamp is much more susceptible to damage
while it is hot.
3. Operate your projector in a clean, relatively dust-free
environment to prevent clogging of fans and air filters. These
filters should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so
excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your
projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments,
for example in a car on a summer or winter day.
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then
open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up
the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it
reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.
HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP
Inquiry Cart
0