Ni95al5 Nickel Base Alloy Wire 1.6mm For Electronic Components

1.6mm Ni95al5 Wire From Factory

• Thermal spray wire​

Introduction:

Changzhou DLX alloy produce nickel based alloy. And we also offer NiAl95/5 is kind of nickel aluminum alloyfor thermal spray.

PMET 885/Ni95Al5/Tafa 75B/ MEC 885 is widely used as a bond coat for subsequent thermal spray topcoats and as a one-step build up material for dimensional restoration of aircraft engines. Thermal spray wire ni95al5 can be achieved on clean smooth surfaces. Roughening of the surface by machining, grit blasting or grinding can increase the bond strength up to 10,000 psi. Changzhou DLX alloy produce Ni95Al 5 wire and Ni exhibits good resistance to high temperature oxidation and abrasion, and excellent resistance to impact and bending. NiAl95/5 can be machined and ground to a finish of 5 micro inches. It is a self-bonding, one step material and is also suitable for the build-up and dimensional restoration of nickel-based alloys.

Typical Uses and Applications:
This material has proven very effective in providing long term protection to boiler tubes against high temperature sulfidation. The wrought material is highly resistant to sulfur/vanadium atmospheres up to 1800°F. Wrought material of this type has shown a 2 mil per year corrosion rate over a nine year period when used in the super heater section of boilers. Coatings of 45CT wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service (as of this writing).

• Thermal spray wire​

• ​Application

(1) For vacuum coating
(2) For making valves grid, inner components of vacuum valves
(3) Components insides the electron tubes
(4) For making lead, supporting wire
(5) For Electronic components
(6) For battery production
(7) Strong base of the filter

• Size range

Wire: 0.8mm 1.2mm 1.6mm 2.4mm 3.2mm.

• Package

Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements)
For the Thermal spray wires , we wind small size wire less than 1.6mm wires on spools. Bigger size over than 2.4mm in coils. Then put spools into cartons, Then put the cartons onto pallet or wood box.

• Our Services

1) Free sample could be supplied for testing purpose.
2) Customized lable, packing, OEM service.
3) Mill test certificate will be provided after production.
4) Good packing methods to keep goods statable.

Changzhou DLX Alloy Co., Ltd. was established in 2016 and has passed ISO9001 international quality management system certification and SGS certification. Our factory is becoming a high-tech enterprise specializing in the research and production of special alloy materials. The production process includes melting, drawing, heat treatment, precision machining, and testing.
Main categories: electric heating wire, nickel welding wire, thermocouple wire, corrosion-resistant alloy, thermal spraying alloy