SAMSUNG SM321 SM421 SMN 8mm 01005 FEEDER For Surface Mounted Technology Machine

SAMSUNG SM321 SM421 SMN 8mm 01005 FEEDER For Surface Mounted Technology Machine

Description:

The main reason for the move to surface mount technology was the great improvement in terms of speed, reliability and cost for the PCB assembly process. Whilst this is the major impact for the adoption of the technology, it also impacts the design and development of new electronic circuits and equipment. Fortunately this transfer brings more advantages to development and circuit performance, than disadvantages.

Specifications:

Supply Ability:

Sell original new and used Samsung Feeder:

• SAMSUGN CP SM 24MM FEEDER’
• SAMSUNG CP SM 32MM FEEDER
• SAMSUNG CP SM 8MM FEEDER
• SAMSUNG CP SM 12MM FEEDER
• SAMSUNG CP SM 16MM FEEDER
• SAMSUNG CP SM 24MM FEEDER
• SAMSUNG CP SM 32MM FEEDER
• SAMSUNG CP SM16MM FEEDER
• SAMSUNG CP SM44MM FEEDER
• SAMSUNG CP SM 8MM FEEDER
• SM320 STICK FEEDER

SMT Advantage:

1. Small errors in component placement are corrected automatically as the surface tension of molten solder pulls components into alignment with solder pads. (On the other hand, through-hole components cannot be slightly misaligned, because once the leads are through the holes, the components are fully aligned and cannot move laterally out of alignment.)

2. Better mechanical performance under shock and vibration conditions (partly due to lower mass, and partly due to less cantilevering)

3. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

4. Better EMC Performance(lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance.

5. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

Related Parts:

• Samsung Feeders in great stock:

Fujintai Technology Co., Ltd was founded in early 2003, is one of the earlier companies in the smt industry. Company has been committed to smt equipment and accessories, and peripheral products sales, maintenance, maintenance and technical advisory services. At smt placement machine, plug-in machine, tin paste printing machine, dispensing machine and other industrial control card maintenance for many years, with a number of decades of maintenance experience of senior engineers. Rich knowledge and practical experience in various fields of microelectronics, electromechanical, automation and computer.

Company's main business:

1. Sales and repurchase of all kinds of new and used smt equipment and accessories, including placement machine, tin paste printing machine, Reflux

Furnace, X-Ray, AOI, upper and lower board machine and Feeder, etc.

2. Supply full range Juki original factory accessories.

3. Refined Juki equipment components: such as Laser, Driver, Servo Motor and Control Board.

4. Refinement cyberoptics series of optical sensor devices: Juki Laser, Samsung Laser, Philips Laser, Tenryu Laser, Autotronik Laser, Yamaha Laser, Dek Camera, etc.

5. Professional sales and refinement of Panasonic CM20F, CM202, CM301, CM402, CM602 Drive, the model available has: MR-J2-40B-XT63, JM-J2-70B-XT63, MR-J2-20A-N26, MR-J2-40A-N26, MR-J2S-40B-EE085, MR-J2S-70B-EE085, MR-J2S-100B-EE085, MR-J2S-60B-S041U638, MR-J2S-350B-S041U703, etc.

6. SMT peripheral equipment and accessories sales and so on.

7. SMT placement machine rental services.